+ Post new Ad
Parker 954 Vise, 4 Inch Jaws, Fixed Base, US $640 – Picture 0
Parker 954 Vise, 4 Inch Jaws, Fixed Base, US $640 – Picture 0

Parker 954 Vise, 4 Inch Jaws, Fixed Base

US $640

  • Prior Lake, Minnesota, United States
  • Jun 23rd
Open on mobile:
QR code
Parker 954 Vise, 4 Inch Jaws, Fixed Base Up for sale is a Parker 954 vise with 4 inch jaws. When I got this vise I thoroughly cleaned, stripped, and inspected the vise and found no cracks. I then gave it a though wire brushing to remove all the surface rust. I hand-fitted the collar to remove almost all of the backlash.  The vise then got a coat of etching primer to eliminate any remaining oxidation. The bottom was also primed for corrosion protection. I followed that up with a few coats of Rustoleum Satin Oregano. This vise has seen a few years of service and as expected they have left marks here and there. There is some pitting on the handle and some marks on the rear of the slide. Please look over the photos for details. I also included a photo of an old advertisement for this vise. This vise is versatile and heavy duty. It weighs in at a hefty 48 pounds and is about 17 inches long and 7 inches wide at the base. It has almost 4 inches of throat depth. It opens to over 4 inches with full screw engagement in the vise nut. It has a mounted height of 8.5 inches. The handle spins smoothly and easily with one finger and has almost no backlash when reversing directions. Fresh synthetic grease was added to the vise nut and main screw. This vise is ready for another 50 years of service. Smart Phone Users Take Note: Some smart phone apps may show shipping as free. This is an error! Shipping is not free. Please read the listing carefully. Shipping: This vise is a high quality tool and deserves to be carefully shipped to avoid damage. I will secure the vise within a wood frame that fits snugly inside a double-walled heavy duty cardboard box. I ship to the United States only. PayPal only, please. Thanks for looking.

Directions

Similar products from Grips & Tongs

KURT 8" VISE D80 "Made in U.S.A."

KURT 8" VISE D80 "Made in U.S.A."

  • Edison, New Jersey, United States
  • Jun 23rd
PAIR OF QUICK-CHANGE STEEL JAWS FOR 6" KURT D60 D675 VISE - 6" x 1-3/4" x 3/4"

PAIR OF QUICK-CHANGE STEEL JAWS FOR 6" KURT D60 D675 VISE - 6" x 1-3/4" x 3/4"

  • La Puente, California, United States
  • Jun 23rd
Vintage Cast Iron 3 1/4" Jaws Anvil Clamp On Bench Vise W Hardy Holes

Vintage Cast Iron 3 1/4" Jaws Anvil Clamp On Bench Vise W Hardy Holes

  • Tiffin, Ohio, United States
  • Jun 23rd
Rotary Vice Base (No Name)

Rotary Vice Base (No Name)

  • Chino, California, United States
  • Jun 23rd
Set of Two 7" Cast Iron V Blocks

Set of Two 7" Cast Iron V Blocks

  • Irvine, California, United States
  • Jun 23rd
4 PAIRS MACHINIST PARALLELS 6x3/16x1,1-1/4,1-1/2,1-3/4 machinist tools *C

4 PAIRS MACHINIST PARALLELS 6x3/16x1,1-1/4,1-1/2,1-3/4 machinist tools *C

  • Thomaston, Connecticut, United States
  • Jun 23rd
Used Pony Clamp-On Vise 2.5” Jaw Opening No. 13025 Excellent Condition

Used Pony Clamp-On Vise 2.5” Jaw Opening No. 13025 Excellent Condition

  • Philippi, West Virginia, United States
  • Jun 23rd
SHARS ADJUSTABLE PARALLELS PARALLEL SET machinist tools *C

SHARS ADJUSTABLE PARALLELS PARALLEL SET machinist tools *C

  • Thomaston, Connecticut, United States
  • Jun 23rd
4-1/2" Columbian 604-1/2 M2 Machinist Vise; original paint; T jaws!, swivel NICE

4-1/2" Columbian 604-1/2 M2 Machinist Vise; original paint; T jaws!, swivel NICE

  • Pikesville, Maryland, United States
  • Jun 23rd
Wilton Tool Mfg. Powrarm Junior

Wilton Tool Mfg. Powrarm Junior

  • Wichita, Kansas, United States
  • Jun 23rd
Machinist vise with specialty insert plates, multi-angles

Machinist vise with specialty insert plates, multi-angles

  • Saint Louis, Missouri, United States
  • Jun 23rd
VINATGE BM angel vise

VINATGE BM angel vise

  • Surprise, Arizona, United States
  • Jun 23rd
Vintage Cast Iron Craftsman 4 1/2" Jaws Swivel Base Anvil Bench Vise U.S Made

Vintage Cast Iron Craftsman 4 1/2" Jaws Swivel Base Anvil Bench Vise U.S Made

  • Van Nuys, California, United States
  • Jun 23rd
Panavise Work Holding Bench Clamp Vise Model 311 Mount, Base & Head

Panavise Work Holding Bench Clamp Vise Model 311 Mount, Base & Head

  • Clovis, California, United States
  • Jun 23rd
8" X 8" Machine Vise Very Heavy, Good Condition Our No. 3 (014-50)

8" X 8" Machine Vise Very Heavy, Good Condition Our No. 3 (014-50)

  • North Tonawanda, New York, United States
  • Jun 23rd
Pittsburgh 4" Drill Press Vise Metalworking Tooling (30999), NEW!

Pittsburgh 4" Drill Press Vise Metalworking Tooling (30999), NEW!

  • Marengo, Wisconsin, United States
  • Jun 23rd
Toolmaker Machinist Grinding work gang vice lot of 20 screw tightening

Toolmaker Machinist Grinding work gang vice lot of 20 screw tightening

  • Hadley, Pennsylvania, United States
  • Jun 23rd
Vintage No.00-H Pipe Clamp Vise Bench

Vintage No.00-H Pipe Clamp Vise Bench

  • Aberdeen, Washington, United States
  • Jun 23rd
NOS PALMGREN USA - Precision Drill Press vise PROJECT ROUGH CASTING 2-1/2" Jaws

NOS PALMGREN USA - Precision Drill Press vise PROJECT ROUGH CASTING 2-1/2" Jaws

  • Perth, Ontario, Canada
  • Jun 23rd
COLUMBIAN 04M2 BENCH VICE W/ ANVIL 4" MADE IN U.S.A. Blacksmith Metal Shop Tool

COLUMBIAN 04M2 BENCH VICE W/ ANVIL 4" MADE IN U.S.A. Blacksmith Metal Shop Tool

  • Long Beach, California, United States
  • Jun 23rd

People who viewed this item also vieved

20 pc Ten Pair Machinist 1/8" Thin Parallel Tool Set

20 pc Ten Pair Machinist 1/8" Thin Parallel Tool Set

  • Barrington, Illinois, United States
  • Jan 30th
MITUTOYO 181-904 V-BLOCK/CLAMP SET.. Machinist Tool. Made in BRAZIL

MITUTOYO 181-904 V-BLOCK/CLAMP SET.. Machinist Tool. Made in BRAZIL

  • Howell, Michigan, United States
  • Jan 30th
Precision Ground 1-2-3 Blocks Set 1

Precision Ground 1-2-3 Blocks Set 1

  • Brooklyn, New York, United States
  • Jan 30th
MT4 Carbide Tipped Half-Notched Dead Center

MT4 Carbide Tipped Half-Notched Dead Center

  • Chino, California, United States
  • Jan 30th
5 Lathe Dead Centers

5 Lathe Dead Centers

  • Millstone Township, New Jersey, United States
  • Jan 30th
Rohm 08 MK4 Live Center #4 Taper

Rohm 08 MK4 Live Center #4 Taper

  • Millstone Township, New Jersey, United States
  • Jan 30th
84943679 Set (3) Serrated Soft Jaws- F/10" Kita Chuck Howa

84943679 Set (3) Serrated Soft Jaws- F/10" Kita Chuck Howa

  • Angier, North Carolina, United States
  • Jan 30th
WESTFALIA 0019-0473-360 SPINDLE CAP CUTTING BORE MACHINE DRILL TOOL PART B212886

WESTFALIA 0019-0473-360 SPINDLE CAP CUTTING BORE MACHINE DRILL TOOL PART B212886

  • Buffalo, New York, United States
  • Jan 30th
The Cushman Chuck Co. @6" 3 jaw chuck Hartford Conn. USA face plate & 2 jaw sets

The Cushman Chuck Co. @6" 3 jaw chuck Hartford Conn. USA face plate & 2 jaw sets

  • Troy, Michigan, United States
  • Jan 30th
Lot of 8 De-Sta-Co 207-TU Vertical Hold-Down Toggle Locking Clamp

Lot of 8 De-Sta-Co 207-TU Vertical Hold-Down Toggle Locking Clamp

  • Mokena, Illinois, United States
  • Jan 30th
NEW De-Sta-Co 205-U Horiz Handle Hold Down Toggle Clamp

NEW De-Sta-Co 205-U Horiz Handle Hold Down Toggle Clamp

  • Leander, Texas, United States
  • Jan 30th
Bessly Welders Angle Clamp Corner Clamp

Bessly Welders Angle Clamp Corner Clamp

  • Dayton, Nevada, United States
  • Jan 30th
REGO FIX E25 ER COLLET NUT SPANNER PIN HOOK STYLE WRENCH FOR CNC MILL TOOLING

REGO FIX E25 ER COLLET NUT SPANNER PIN HOOK STYLE WRENCH FOR CNC MILL TOOLING

  • Chino, California, United States
  • Jan 30th
COLLIS TG100 COLLET CHUCK EXTENSION #78361 STK 1022

COLLIS TG100 COLLET CHUCK EXTENSION #78361 STK 1022

  • Wadley, Alabama, United States
  • Jan 30th
NEW ER16 COLLET CHUCK NUTS

NEW ER16 COLLET CHUCK NUTS

  • Wadley, Alabama, United States
  • Jan 30th
7/32" ER25 Collet SE25-0219

7/32" ER25 Collet SE25-0219

  • Lebanon, Tennessee, United States
  • Jan 30th
5-4MM ER25 Collet triangle maker mark

5-4MM ER25 Collet triangle maker mark

  • Lebanon, Tennessee, United States
  • Jan 30th
4MM / 5/32" ER25 Collet mfg unknown

4MM / 5/32" ER25 Collet mfg unknown

  • Lebanon, Tennessee, United States
  • Jan 30th
Ridgid No. 462 Angle Pipe Welding Vise (Inv.31966)

Ridgid No. 462 Angle Pipe Welding Vise (Inv.31966)

  • Portland, Connecticut, United States
  • Jan 30th
Aluminum Flats and Angle Scrap Pack, 1.5in (17pcs)

Aluminum Flats and Angle Scrap Pack, 1.5in (17pcs)

  • Old Fort, North Carolina, United States
  • Jan 30th
Aluminum Offset Angle 3/4” x 1-1/2” x 8 in, 1/16 in thick, .75 IN (15pcs)

Aluminum Offset Angle 3/4” x 1-1/2” x 8 in, 1/16 in thick, .75 IN (15pcs)

  • Old Fort, North Carolina, United States
  • Jan 30th
Precsision Arbor Shims 1/2" I.D. X 3/4" O.D. X .010 thickness (4) packages of 20

Precsision Arbor Shims 1/2" I.D. X 3/4" O.D. X .010 thickness (4) packages of 20

  • Sugar Grove, Illinois, United States
  • Jan 30th
Precision Brand Punch Tru, Punch & Die Set 40110

Precision Brand Punch Tru, Punch & Die Set 40110

  • Sterling Heights, Michigan, United States
  • Jan 30th
NICE! SET OF 3" EXPANDING MANDRELS FOR LATHE W/ D1-6 CAMLOCK MOUNT ADAPTER

NICE! SET OF 3" EXPANDING MANDRELS FOR LATHE W/ D1-6 CAMLOCK MOUNT ADAPTER

  • Chino, California, United States
  • Jan 30th
Moore 10" Rotary Table

Moore 10" Rotary Table

  • Machesney Park, Illinois, United States
  • Jan 30th
Bridgeport 15 inch rotary table

Bridgeport 15 inch rotary table

  • Oak Ridge, Tennessee, United States
  • Jan 30th
Troyke T5C 1 A (4) Spindle Head CNC 4th Axis Rotary Table, 5C Collet Chuck drive

Troyke T5C 1 A (4) Spindle Head CNC 4th Axis Rotary Table, 5C Collet Chuck drive

  • Franksville, Wisconsin, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies