Parts (Stationary Engines) for sale, page 28

Antique hit miss engine grease/oil pipe type oiler/grease cup primer

Long Beach, California, United States
Jul 19th

Antique Hit Miss Engine Grease/Oil Pipe Type Oiler/Grease Cup Primer. Not sure what this is from. Marked 33k1 and 34k1 on the inside of the cap.

Lunkenheimer fig. 906 bs 1 inch bronze stem valve 906-bs-1

Cocoa, Florida, United States
Jul 19th

Here is a lot of 8 Lunkenheimer 1" bronze needle/stem valves. They came from a defunct factory warehouse where they were stored in an open box (accounting for their varied cosmetic appearances). Although some have more light corrosion than others, they are all unused NOS valves, ready to go to work.

Piston ring set for ruggerini ry70 (79mm) oversize [#8211229]

Athens, Greece
Jul 19th

This listing is about a brand new after-market Piston Ring Set for RUGGERINI RY70 engine that fits one (1) piston. This Piston Ring Set is of Oversize diameter 79mm (Oversize), it replaces OEM Part #8211.229, and consists of the following rings: The Compression Ring of the 1st groove is Chrome. The Compression Ring of the 2nd groove is Taper faced.

Ihc international hit miss gas engine la lb 1 1/2 -2 1/2 hp cam followers

Onaga, Kansas, United States
Jul 18th

IHC International McCormick Deering Model LA LB 1 1/2 -2 1/2 HP Cam Followers. Good shape from a parted out LB from an IHC collectors estate. See Photos!

Ihc international lb 1 1/2 - 2 1/2 hp hit miss gas engine carburetor assembly

Onaga, Kansas, United States
Jul 18th

Original IHC International LB 1 1/2 - 2 1/2 HP Hit Miss Gas Engine Carburetor Assembly. It has the IHC circle logo and part #3536-D 2 cast on it. It has good fuel line threads in the carb body.

Ihc international la1 1/2 - 2 1/2 hp hit miss gas engine carburetor assembly

Onaga, Kansas, United States
Jul 18th

Original IHC International LA 1 1/2 - 2 1/2 HP Hit Miss Gas Engine Carburetor Assembly. The fuel line threads look usable. Needle valve is not stuck.

Oiler vermont farm mach. co.

Baraboo, Wisconsin, United States
Jul 18th

GOOD CONDITION, NEEDS CLEANING & POLISHING - GLASS IS 1 5/8 INCH DIAMETER & 1 1/8 INCH HIGH

Oiler national brass co. rochester n.y.

Baraboo, Wisconsin, United States
Jul 18th

GOOD CONDITION, SIGHT GLASS BROKEN 1/8 INCH PIPE THREAD GLASS ABOUT 1 1/2 INCH DIAMETER 1 1/4 INCH HIGH.

Oiler essex brass corp. #1 1/2

Baraboo, Wisconsin, United States
Jul 18th

IN GOOD CONDITION,1/4 INCH PIPE THREAD. ALL GLASS IS GOOD

Maytag gas engine model 92 flywheel

Champlin, Minnesota, United States
Jul 18th

Used Maytag model 92 gas engine flywheel. serial 515743.

Replacement carburetor fits wisconsin aenld

Sterling Heights, Michigan, United States
Jul 18th

Replacement Carburetor Fits Wisconsin AENLD. Marked on tag " 153A TSX 428 EAE9510C "NOTE : This is NOT an original Zenith Carburetor ! It is an aftermarket knock - off !I used it to test run a Wisconsin AENLD - It worked well .

Hit miss stationary engine crank t75

Bloomingdale, Georgia, United States
Jul 18th

Hit Miss stationary Engine Crank T75. Nice original crank. Not sure what kind of engine for.

Brass oiler hit miss stationary engine nathan?

Bloomingdale, Georgia, United States
Jul 18th

Brass Oiler Hit Miss Stationary Engine Nathan?. Really neat old glass brass oiler. I believe it says Nathan MFG 3 although it is hard to read.

Antique nickel chrome hit & miss engine oiler, lot of 4

Springville, California, United States
Jul 18th

Lot of 4 Antique Nickel Chrome Hit & Miss Engine Oiler -2 are DeLaval -2 are unmarked The two DeLaval appear to be in good very condition. The two unmarked- one has a crack on the glass and the other is missing the base. Could be used for parts or decorations.

3hp fairbanks morse z steel crankguard hit miss gas engine steam tractor oiler

Waldo, Wisconsin, United States
Jul 17th

This is a very hard to find original steel crankguard or fender for a 3hp Fairbanks Morse Z flywheel type gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind as can be seen. It measures about 5 5/8 x 17 inches and sits in the back lip of the crankcase and mounts with one hole to the tab on the back of the hopper.

Gits brothers gravity feed oiler - brass gravity feed lubricator oiler

Dundee, Michigan, United States
Jul 17th

One oiler. Item comes as shown in the pictures.

2 wisconsin engine ua30 handle crank starter

Mitchell, Nebraska, United States
Jul 17th

2 Wisconsin engine UA30 handle crank starters one of the cranks is longer the other and one of the spinner is stuck the other is free and spins look at pics for the what looks like the teeth match only of them has the the ua30 on it sold asis