parts of the brush for sale, brand-new and used.

New Drive Brush Pin for Hoover Steam Vac Brush Blocks

New Genuine Hoover V2 6 Brush Steam Vac Nozzle Assembly Part # 91001096 This is the large nozzle assembly on the front of the machine base, that pulls the water out of the carpet.

New Genuine Hoover V2 5 Brush Steam Vac Nozzle Assembly Part # 43411019 This is the large nozzle assembly on the front of the machine base, that pulls the water out of the carpet. IMPORTANT NOTE : This nozzle assembly will fit all Hoover Dual V, and V2 Steam Vacs with 5 Brushes on the Brush Block (models beginning with F72__-___ ), as long as your old nozzle has 2 square holes, one on each side of the hose connection port, as seen in picture # 1 above.

New Genuine 3 Position Turbine Gear for 6 Brush Hoover Steam Vacs Part # 43191018 subs to new Hoover # 440006173 (part is identical) 3 Position Turbine and Gear Assembly for 6 Brush Dual V Steam Vacs.

New Genuine Stationary Brush Strip for Hoover Steam Vacs Part # 48447002 Replaces the following obsolete part number : 48443005 Will fit all Hoover Steam Vacs that use a stationary brush strip. Fits the following models : F5805, F5806, F5807, F5808, F5809, F5810, F5810-900, F5815, F5817, F5821, F5822, F5824-900, F5825, F5826-900, F5827, F5831, F5831-900, F5832-900, F5832-910, F5833-900, F5835-900, F5853 and F5853-900 as well as all Hoover Steam Vacs that use a stationary brush strip.

New Genuine Hoover Turbine & Gear Assembly for 5 Brush Steam Vacs Part # 43191021 This is the part that makes the brushes on the brush block spin. Replaces the following part numbers: 90001356, 43191008, and 43191021 Will fit most Hoover Steam Vacs that have 5 Brushes on the Brush Block. Does not fit the Dual V models.

New Genuine Hoover Turbine & Gear Assembly for 5 Brush Steam Vacs Part # 90001355 This is the part that makes the brushes on the brush block spin. Replaces part numbers9000

New Genuine Hoover Turbine & Gear Assembly for 5 Brush Steam Vacs Part # 90001354 or 43191019 This is the part that makes the brushes on the brush block spin. Replaces part numbers 90001354, 43191019, 43191001 The best way to discover whether this part needs to be replaced is to remove the brush block and insert a flat head screw driver into the small square hole that accepts the green drive pin from the brush block. Attempt to twist the screwdriver.

Genuine Hoover Turbine & Gear Assembly for 5 Brush Dual V Steam Vacs Part # 43191009 This is the part that makes the brushes on the brush block spin. Fits ALL Dual V, and V2 Steam Vacs with 5 Brushes on the Brush Block. Fits all model numbers beginning with F72__-___

New Genuine Grout Brush Block for Hoover FloorMate Part # 93001092 Note : Hoover has labeled some of their refurbished machines (model numbers ending with RM) with incorrect model numbers. If your model number ends in RM please check your old brush block or your nozzle width to

New Genuine Brush Block for Hoover FloorMate Part # 93001092 Note : Hoover has labeled some of their refurbished machines (model numbers ending with RM) with incorrect model numbers. If your model number ends in RM please check your old brush block or your nozzle width to be sure that you are ordering the correct part. This brush block has 7 brushes on it, and it is about 15 inches long.

New Genuine Stationary Brush Strip for Hoover Steam Vacs Part # 48447002 Replaces the following obsolete part number : 48443005 Will fit all Hoover Steam Vacs that use a stationary brush strip. Fits the following models : F5805, F5806, F5807, F5808, F5809, F5810, F5810-900, F5815, F5817, F5821, F5822, F5824-900, F5825, F5826-900, F

New Genuine Brush Block for Hoover FloorMate

New Genuine Brush Block for Hoover FloorMate Part # 93001091 Note: The original brush block in picture #1 has been discontinued, and is now being replaced by an improved brush with longer bristles. You will receive the improved brush block in picture # 2 above. The original brush block is pictured to show that it is being replaced by the new improved brush with longer bristles.

New Genuine 2 Position Turbine Gear for 6 Brush Hoover Steam Vacs Part # 91001019 or 43191012 2 Position Turbine and Gear Assembly for 6 Brush Dual V Steam Vacs. Only fits models with 2 Positions (On/Off) for the brush speed settings. If your model has 3 Positions (2 On positions and 1 Off position) for the brush speeds, you need part # 43191018, which is also available in my store.

Genuine Hoover Turbine & Gear Assembly for 5 Brush Dual V Steam Vacs Part # 43191009 This is the part that makes the brushes on the brush block spin. Fits ALL Dual V, and V2 Steam Vacs with 5 Brushes on the Brush Block. Fits all model numbers beginning with F72__-___ The best way to discover whether this part needs to be replaced is to remove the brush block and insert a flat head screw driver into the small square hole that accepts the green drive pin from the brush block.

Original Nilfisk OEM parts 28" 180 Grit scrub brush blue/grey. Part # 56412193. New with box.