PELCO DVR5300 Series Endura Enabled DVR5348 Fully Loaded HDD (12) @ 400GB DVR2, US $750.00 – Picture 0

PELCO DVR5300 Series Endura Enabled DVR5348 Fully Loaded HDD (12) @ 400GB DVR2, US $750.00 – Picture 1

PELCO DVR5300 Series Endura Enabled DVR5348 Fully Loaded HDD (12) @ 400GB DVR2, US $750.00 – Picture 2

PELCO DVR5300 Series Endura Enabled DVR5348 Fully Loaded HDD (12) @ 400GB DVR2, US $750.00 – Picture 3

PELCO DVR5300 Series Endura Enabled DVR5348 Fully Loaded HDD (12) @ 400GB DVR2, US $750.00 – Picture 4

Pelco Dvr5300 Series Endura Enabled Dvr5348 Fully Loaded Hdd (12) @ 400gb Dvr2

US $750.00

Rhinelander, Wisconsin, United States
Jan 30th

Open on mobile:
QR code

Tested and Working 12 seperate 400GB HDD included I also have the encoders, matrix switches, and cameras for this unit. Also more DVRs The DVR5348 is part of the Pelco Endura DVR5300 Digital Video Recorder System series and can be used to record video and audio streams from up to 48 IP cameras over a network. It can also receive IP streams from analog cameras connected to Endura compatible encoders or to ENC5300 series USB multichannel video encoders. The ENC5300 series encoders are specifically designed to work with this DVR5300 series of DVRs and are available in 8 or 16 channel configurations. Up to three ENC5300 encoders can be connected to a single DVR5300 recorder in any combination. Recorded video can be viewed, played back, and controlled from any Endura viewing system such as the WS5000, VCD5000, or NET5301R decoder. Video generated by an ENC5300 encoder will be displayed at their recorded rate when accessed over an Endura system. Video can also be viewed via a CM9700 matrix switch using the CM9700MDD-EVS. By integrating this DVR with an existing matrix, operators can access this DVR using the same matrix console they're already familiar with. This DVR accepts internal storage drives that can be pre-configured for RAID 5 operation. This means that should any one drive fail its contents can be recovered by the other functioning drives, thereby providing fail safe operation. Redundant power supplies further help in maintaining system reliability. This DVR incorporates EnduraStor technology to maximize storage and network efficiency. EnduraStor makes it possible to program any channel to record at a higher frame rate when triggered by alarm or motion detection and then revert to a lower frame rate when the event has passed. This way full motion video is provided when it's needed most. Small footprint optimizes space planning for enterprise installations Records video and audio from up to 48 cameras, each at 30 images per second (ips), 4CIF resolution Records analog video from ENC5300 series USB multichannel encoders - 8 or 16 MPEG-4 video input channels with 8 or 16 G.711 audio input channels - Up to 30 high quality 4CIF ips per input - 8 or 16 programmable alarm inputs and 2 or 4 relay outputs - USB 2.0 connection to DVR5300 with Plug-and-Play configuration - Coaxitron PTZ control on each input Records digital video from Endura video encoders Expandable storage capacity using the Endura iSCSI storage expansion boxes (SEB5100) All video is digitally signed at the encoding source for authentication EnduraStor storage management system Limited video editing on exported video Fault tolerance through use of RAID 5 storage and redundant power supplies and fans System diagnostics, monitoring, and error logging Compatible with Pelco's CM9700 matrix switchers DVR failover support using CM9700 matrix switchers Specs System Operating System Linux User Interface Remote operation from WS5000 Endura Workstation or VCD5000 Signal System NTSC/PAL/EIA/CCIR composite Multiplexing Yes Compression MPEG-4 Channels 48 Storage Storage: Not included Empty HDD Bays: 12 Maximum Storage Capacity: Up to 6.98 TB, expandable using SEB5100 HDD Interface: SATA, hot-swappable RAID Level: 5 Built-In CD/DVD Burner None Resolution 4CIF: 704 x 480 NTSC / 704 x 576 PAL 2CIF: 704 x 240 / 704 x 288 PAL CIF: 352 x 240 / 352 x 288 PAL Recording Rate Up to 30 FPS at 4CIF Quality Setting Adjustable PTZ Control Coaxitron (ENC5300) Pelco D/Pelco P (DVR5300) Motion Detection Yes USB Port 4 high-speed USB 2.0 ports on rear panel Control Ports 1 RJ-45 connector; RS-422 from DVR5300 to CM9760-CDU-T; Pelco D/Pelco P Alarm I/O Alarm Inputs: 16, programmable, 5.0 VDC, 10 kohms, triggered, CM9760-ALM compatible Relay Outputs: 4, form-C relay, 30 VDC 2 A or 125 VAC 0.5 A, CM9760-REL compatible Network Network Interface 2 Gigabit Ethernet RJ-45 ports (1000Base-T) Network Protocol Support Yes Security 2 modes: secure mode (device authentication) and unsecure mode General Power Requirements 100-240 VAC 50/60 Hz, autoranging (internal, dual-redundant, hot-swappable power supply) Power Consumption 100 VAC: 339 W, 3.40 A, 1157 BTU/H 115 VAC: 335 W, 2.95 A, 1143 BTU/H 220 VAC: 332 W, 1.58 A, 1133 BTU/H Operating Temperature 50 - 95°F (10 - 35°C) - at unit air intake Dimensions (DxWxH) 16.7 x 17 x 1.7" (42.4 x 43.2 x 4.3cm)

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Removed from working environment”