Philips/Bosch LTC 9409/20 Weather Proof Outdoor Security Camera Mount Pan/Tilt, US $240 – Picture 0

Philips/Bosch LTC 9409/20 Weather Proof Outdoor Security Camera Mount Pan/Tilt, US $240 – Picture 1

Philips/Bosch LTC 9409/20 Weather Proof Outdoor Security Camera Mount Pan/Tilt, US $240 – Picture 2

Philips/Bosch LTC 9409/20 Weather Proof Outdoor Security Camera Mount Pan/Tilt, US $240 – Picture 3

Philips/Bosch LTC 9409/20 Weather Proof Outdoor Security Camera Mount Pan/Tilt, US $240 – Picture 4

Philips/Bosch LTC 9409/20 Weather Proof Outdoor Security Camera Mount Pan/Tilt, US $240 – Picture 5

Philips/Bosch LTC 9409/20 Weather Proof Outdoor Security Camera Mount Pan/Tilt, US $240 – Picture 6

Philips/Bosch LTC 9409/20 Weather Proof Outdoor Security Camera Mount Pan/Tilt, US $240 – Picture 7

Philips/bosch Ltc 9409/20 Weather Proof Outdoor Security Camera Mount Pan/tilt

US $240

Los Angeles, California, United States
Jan 30th

Open on mobile:
QR code

New Surplus Philips LTC 9409/20 Weather Proof Outdoor Pan/Tilt, Resently Bosch Has Acquierd This Line From Philips Ship To Lower 48 States The LTC 9409 Series Weatherproof Outdoor Pan/Tilts are low profile, economical, compact units constructed with corrosion-resistant hardware. These remote positioning devices are fully system compatible with CCD cameras, lenses, and housing combinations. LTC 9409 Series Outdoor Pan/Tilts Low Profile, Compact Size Economical 100% Duty Cycle Motors Upright or Inverted Operation Permanently Lubricated Functions The 100% duty cycle motors permit continuous operation. The modular gear-motors allow for "no alignment service". All-metal gearing, hardened steel drive shafts, and direct drive output offer superior reliability. Use of impedance protected motors, long life limit switches, and permanent lubricated bearings and gears reduce maintenance and provide trouble-free operation. 1 Power Connector (P-1) 2 Positioning Connector (P-2)* * "-P" units only Technical Specifications Electrical Model No.1) Rated Motor Voltage Operational Voltage Range Total Pan Angle (No Fixed Stop) Standard Model LTC 9409/20 24 VAC 60 Hz 21.6 to 26.4 VAC 15° to 355° Connectors Power Via 7-pin connector on unit Positioning Via 7-pin connector on unit Mating connectors provided with unit Recommended Maximum Cable Lengths Model Wire Size Distance Voltage 2) mm 2) AWG Meters Feet 24 VAC 0.5 20 58 190 1 18 91 300 1.5 16 145 475 2.5 14 236 775 4 12 381 1250 1) The total power for both motors running, is 22W. Single phase power sources only. 2) Values calculated at 20 C (68° F) using stranded copper wire,a single conductor Pan/Tilt common (neutral) wire, and with both PAN and TILT motors operating simultaneously. Mechanical Pan/Tilt Speed 7.5°/sec at 60 Hz (6.3°/sec at 50 Hz) Tilt Movement in vertical plane + 20° to –900 from horizontal Maximum Load 65 kg-cm (56.5 in.-lb) torque or 5.0 kg (11 lb) at a distance of 63.5 mm (2.5 in.) from the center to of mass of the camera/lens/housing assembly to the center of the tilt table to Construction Aluminum, with corrosion-resistant hardware Finish Mushroom Dimensions See Dimensional Outline Weight 4.8kg (10.5 lb) Enviromental Temperature Operating –20°C to +60°C (–4°F to +140°F) Storage –40°C to +60°C (–40°F to +140°F) Vibration 3 g swept sine wave, 15 Hz to 2000 Hz Shock 50 g, 11 ms, 1/2 sine Enclosure Protection Designed to NEMA-4, IP65/UL50, (Watertight) Enclosure Type 4X Product Regulatory Compliance Electromagnetic Compatibility (EMC) Complies with FCC Part 15, ICES-003 and CE regulations Product Safety Complies with CE regulations, UL, CSA, EN and IEC Standards

Condition	New other (see details) : A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“New Surplus”