pin anchor for sale, brand-new and used.

This came on my jeep bumper, never used it on my cj7. You can never have too many of these.

3 3/4" brand new 3 blade PDC drill bit. It has 2-7/8" API Reg pin. If you have any questions feel free to ask.

This style of hammer drill bit is the best. Works great for rawl type anchors, drop in anchors, lead anchors. You can just never drill too far.

This style of hammer drill bit is the best. Works great for rawl type anchors, drop in anchors, lead anchors. You can just never drill too far.

(1 of 2) , Vintage , Screw Pin , Anchor Shackle / Clevis , Weight 29.8 Lbs. , Galvanized Steel , Used , Good Condition , Crosby Measure Chart = A - 3" B - 3 1/2" C - 7" D - 1 3/4" E - 4 1/4" F - 4 3/4" G - 7 3/4" H - 12" L - 3/4" M - 8 1/2" P - 1 3/4"

Hundreds of $$$$ saving on time and installation labor cost, NO need to open the floor Single Door

_______BEST SELLER _______with Power Magnetic Detacher

Here's aLot ofSix (6)CARR LANELatch Clamps Catalog No.:CL-300PA

This Epson PowerLite 450W (H318A) projector was used in a temporary install and pulled after 1 week of use. The lamp has only 23 hours of use on it. Includes remote control, power cable, manual, and installation guide.

Jack Wilkerson Industrial Surplus, LLC. Descrip

(2 of 2) , Vintage , Screw Pin , Anchor Shackle / Clevis , Weight 29.8 Lbs. , Galvanized Steel , Used , Good Condition , Crosby Measure Chart = A - 3" B - 3 1/2" C - 7" D - 1 3/4" E - 4 1/4" F - 4 3/4" G - 7 3/4" H - 12" L - 3/4" M - 8 1/2" P - 1 3/4"

UNUSED CLEVICE SHACKLES, WLL MADE IN CHINA, 9 1/2 TON AND 4 3/4 TON, $7 SHIP USA

1/2” SAFETY BOLT ANCHOR SHACKLE. Meet specification RR-C-271d, Type IVA, Grade A, Class3. Use CAUTION when lifting.

This clever hook is in great vintage condition works great. See all pictures 

As you can see in the photos, this Theodolite is in exceptional physical and operational condition without any noticeable scratches or scuffs and barely qualifies for the category of used. It comes in a water and dust resistant protective chase. Recently calibrated (included)to factory standards by Cincinnati Precision Instruments (CPI) in October 2015 (work order included), this unit has not been out

THIS SALE IS FOR A BRAND NEW BOX OF 100(90 LEFT) GENUINE ITW/RED HEAD CONCRETE ANCHORS, 1/4" X 1-1/4", DRILL SIZE=1/4", CATALOG NUMBER=HS-1412. WE USED 10 OUT OF THE 100 SO 90 ARE LEFT. PRICED TO SELL.