plastic bushing sleeve for sale, brand-new and used.

RETURNS: Must be in original, Sealed Packaging Lists for $196 at Amazon! CG-2077-G STIRRER BEARINGS, CHEM-VAC™, PTFE NEW Chem-Vac™ PTFE stirrer bearing provides a VACUUM TIGHT FLAKE-FREE SEAL. The stabilizer series incorporates a PEEK®/PTFE stabilizing bushing that is molded to the lower portion of the inner joint.

STEELPulley / SheaveReducer Sleeveto reduce a 1" Bore Pulley, gear, sprocket, wheels,etc.to fit a Motor witha 3/4" Shaftwith a 3/16" Keyway slot DescriptionThis Pully Reducer Sle

NEW Chemglass CG-2077-G-04 PTFE Stirrer Bearing 10mm Diameter 24/40 Inner Joint $100.00 $336.95

This is for a 12 pack of nylon bushings/rollers/spacers/sleeves/ or whatever else you may want to call them! They measure: 1/2 inch wide (across), 5/8 inch long (top to bottom), and the inside hole is 9/64 inch (I.D.). This is for a 12-Pack, you can buy as many 12-Packs that you may need!

This is for 24 nylon bushings/rollers/spacers/sleeves/ or whatever else you may want to call them! They measure: 1/2 inch wide (across), 5/8 inch long (top to bottom), and the inside hole is 1/4 inch (I.D.). This is for a 24-Pack, you can buy as many 24-Packs that you may need!

Switchcraft Female Solder Type 3.5mm Jack Model: Tini Jax 42A This sale is for a new Switchcraft Model #42A, Female Tini Jax 0.141" (3.5mm) panel mount connector.This is a good quality part made by Switchcraft (a Raytheon company) and not some overseas import.This connector is a "new old stock" part pulled from a bulk case. There's no retail packaging is available.Due to the age of the part, the contact terminals may show some minor/moderate tarnishing.

This is an auction for a NEW Switchcraft Model # 41, Female Tini Jax Panel Mount Connector, 0.141" (3.5mm) Diameter. This connector is a good quality connector made by Switchcraft, not an overseas import. This Connector is New Old Stock (N.O.S.) from a bulk case, with no retail packaging.

NEW IN BOX 30AMP APPLETON PIN&SLEEVE POWERTITE PLUG COMES WITH USERS MANUAL AND 3 BUSHING RINGS FOR DIFFERENT SIZE WIRES.+ ACP3034BC 30A 3W 4P EXPLOSION PROOF IF YOU HAVE ANY QUESTIONS FEEL FREE TO ASK! THANKS FOR LOOKING! **SHIPPED USPS PRIORITY MAIL** CHECK OUT SELLERS OTHER ITEMS!

Condition: New; old stock. Sold as is. Description: Precision Wirewound Potentiometer 10K

This is a Fixed Auction for up to 2 Sets of 2 Brand New Bars, each 18 inches long, of 20MM diameter Thomson Linear Race Shafting and a set of 2 Brand New Ball Bushing Linear Bearings Open Pillow Blocks, Model SBR20UU. PLEASE NOTE - Each bid is for ONE Set that includes 2 rods and 2 Pillow Blocks This rod is hardened to a 60 case, precision ground and polished.

New, 1/2" Oilite Bronze Thrust Washer 1/2" inside diameter X 1" outside diameter X 1/8" thick. Made from high quality, long lasting oilite material (oil impregnated Bronze), the impregnated oil in the bronze lubricates the rotating part or shaft during use. Perfect for many industrial, commercial, automotive, recreational, go-kart, electric motor, machinery, conveyors, tooling, and many other applications.

Technical Specs Item Belt Drive Motor Motor Application HVAC/R Motor Sub Application Belt Dr Fan/Blower Motor Type Split-Phase HP 1/4 Nameplate RPM 1725 Voltage 115 Frame 48 Enclosure

List of Parts: For 3410 Gould Pump 1 - C02402A - Sleeve 1 - RB02006A - Nut, Sleeve Assembly 1 - B0047A06 - Bushing,Throat 1 - 8690-72015 - Seal, Oil 1 - White Collar (2)

Contact me first if you have less than 5 bids before bidding. You are bidding here on a nice lot of six (6) brand new, in the box or plastic, Flowserve parts, as follows: 2 each Sleeve Shaft Mechanical Seal Monel F/Goulds MD 00000361120 Part 3R5967HU 00503768 2 each Collar Drive Item #S-58 316SS 00507018 4R4034DB I think these are slurry seals... 2 each Bushing Mechanical Seal Item S-24 Bronze 00512419

AA1257-1 OILITE BUSHING 3/4" X 1-1/4" X 1-1/4" ONE EACH

AA-1212-11 1" X 1-1/4" X 1-1/2" OILITE BRONZE BUSHING LOT OF TWO Standard stock products SAE 841-copper (87-90%), tin (8-9), carbon, other elements

var itemNumber = window.ebayItemID ?