plastic sander for sale, brand-new and used.

TOGGLE SWITCH FOR CLARKE EZ-8 DRUM SANDER, FA-8 ABRADER PART # 47387B (PREVIOUS PART # 47387A) This is the main power toggle switch (off/run/momentary start). Prewired and ready to install, as shown in photo. Rated 15 amps @ 125 volts.

CASTER WHEEL FOR CLARKE EZ-8 DRUM SANDER PART # 59960A This is the rear caster wheel, not the ones on either side of the unit. Unfortunately, Clarke does not offer wheel and bearings separately. We also carry the truck (side) wheels (part

CONTACTOR FOR CLARKE EZ-8 DRUM SANDER, FA-8 ABRADER PART # 41807A Clarke refers to it as a "contactor", but most of us just call it a relay. This component enables the safety function which prevents the machine from starting when it's plugged in. Every time it's switched, a small arc jumps between the contacts,

CONTROL LEVER PIVOT SHOULDER BOLT FOR CLARKE EZ-8 DRUM SANDER, FA-8 ABRADER CLARKE PART # 960952

PAIR OF SWIVEL BEARINGS FOR CLARKE EZ-8 DRUM SANDER PART # 51194B This is one pair of the horizontally-mounted bearings that carry the caster assembly; not the bearings for the wheel itself. In our experience, these bearings need replacement more often than any other part on the EZ-8. Don't let it go too long, or the caster wheel will wea

ABOUT US |

NEW MARSHALLTOWN 6158 8-3/4-INCH BY 3-1/4-INCH NU-PRIDE HAND SANDER (2 PACK)

Goldblatt G15355 9" x 3-1/4", Pole Sander Head, Durable Plastic Construction, Great For The Homeowner/Handyman, K&K Hardware is a full size Hardware Store. Our motto is if we don't have it, you don't need it. If you have a har

Bon 15-197 3-1/4-Inch by 9-Inch Plastic Uni

N.O.S In Box. 2- Norton / Bear Metalite Cloth ,Closekote, Aluminum Oxide Sander belts. 4" X 52-1/2" TJ 100X Grit K242 This Offer is for TWO belts...I also have Boxes of 10 listed separately.

N.O.S In Box. 10 Norton / Bear Metalite Cloth ,Closekote, Aluminum Oxide Sander belts. 4" X 52-1/2" TJ 100X Grit K242 This is a box of ten.

4 Rolls 3M Pro Pak Stikit Sandpaper4 1/2" x 360" (10yd) Vibrator/Palm Sander 80APart No. 99499Adhesive-backed paper coated with sharp silicon carbide mineral. Ideal for sanding wood, plastic/fiberglass,sealer, and primed or painted meal surfaces, particularily when loading is a problem.

You are looking at 2 Walter Coarse Blendex Drums Catalog Number 07M422 for use with the Walter Line Mate finishing sander at 3700 Max RPM. Size is 4 1/2 X 2 X 5/8-11 These drums retail for $54.30 each from the Walter Catalog. Please see my other auctions for other Walter Blendex Drums while supplies last.

You are looking at 2 Walter Medium Blendex Drums Catalog Number 07M423 for use with the Walter Line Mate finishing sander at 3700 Max RPM. Size is 4 1/2 X 2 X 5/8-11 These drums retail for $54.30 each from the Walter Catalog. Please see my other auctions for other Walter Blendex Drums while supplies last.

Brand new unopened Central machinery belt/disc sander.

The powerful 1/3 HP motor on this belt sander works up to 3260 FPM for fast stock removal and a smooth, flawless finish. The belt sander features rubber feet for minimal vibration, a dust collection chute for easy clean-up and a durable die cast, aluminum construction for optimal performance. With adjustable belt tracking and an easily adjustable tilting table, this outstanding belt sander also includes a removable back plate to allow sanding on curves or odd-shaped stock.

FOR MORE PRODUCT INFORMATION GO TO OR CALL OUR TOLL FREE NUMBER 800-942-1300

This is the 1/2 x 6 spindle for the Jet OSS10 floor model sander. This spindle will also fit the Max sander with the short taper spindles. Shipping on this item is free via USPS or UPS.

This is Jet # ovs10-089R. This is the lock nut on the main shaft of the Jet OSS10. Two of these lock against each other so you can instal and remove the sander spindles.