MOTOR BRUSH SET OF 4 FOR CLARKE C-5 EDGERS REPLACES CLARKE PART # 330902 These brushes are no longer supplied by Clarke. They are very hard to find anywhere. As far as we know, these brushes fit only the C-5.
PAPER CLAMP WASHER AND BOLT FOR CLARKE C-5 EDGERS The C-5 is the only edger we know of that uses this left-hand paper clamp bolt. We also carry C-5 brushes and brush springs, part # 330902 and 168324 (find them
Original Authentic Clarke Edger Urethane Wheel Assembly for the Clarke B2 or B2+ edger. You will receive a set of two wheels. Replaces the original steel wheels part number 19901A.
TWO POWER SWITCHES FOR EDGERS CLARKE B2, SUPER 7, SUPER 7R and SUPER E PART # 47394A and SILVERLINE SL-7 C7-24 This switch is rated 20 amps, as opposed to 16 for a stock switch. This means the parts are heavier-duty, and will last much longer than the original switch.
POWER SWITCH FOR EDGERS CLARKE B2, SUPER 7, SUPER 7R and SUPER E PART # 47394A and SILVERLINE SL-7 C7-24 For all voltages (115, 230). Also fits other machines with 4 terminal screws and 7/16" to 1/2" mounting hole.
DUST BAG FOR MANY FLOOR SANDERS REPLACES CLARKE PART # 53728A, 50951A This is the drawstring style dust bag, not the new style with the rubber fitting. To find those, do an eBay search for the part number: 53741A Fits many "smaller" sanders, such as the EZ-8, OB
TWO DUST BAGS: ONE FOR SMALL FLOOR SANDERS, ONE FOR MANY EDGERS REPLACES CLARKE PART #s 50952A, 60720A, 53728A, 50951A This is the drawstring style dust bag, not the new style with the rubber adapter. To find those, search the part number: 53544B (edger) or
DUST BAG FOR MANY CLARKE SANDERS PART # 53741A For smaller floor sanders, such as the EZ-8, OBS-18, etc. New style bag with the attached rubber adapter (as detailed in the third photo above); not the old "drawstring" style (which we also carry; you can find it with an eBay search for the part number: 53728A).
RUBBER BASE PLATE BUMPER FOR OBS-18 or -18 DC PART # 31224B (replaces 31224A) The bumper prevents damage to walls, trim, etc; if you are using a dust skirt, it provides a better dust seal and makes things much quieter!
REBUILD KIT FOR CLARKE OBS-18 AND OBS-18 DC PAD DRIVER GRIP FACE, RUBBER SPRING KIT (4), AND BEARING CLARKE PART # 39730A (previously 32519A), 50736A and 10666A Brand new pad driver grip face, set of 4 rubber springs, and a high quality double-sealed bearing.
6" BACKER PADS FOR CHERRYHILL FLOOR SANDERS: U-SAND, PRO, SUPERBEE CHERRYHILL PART # BP6 Authentic Cherryhill backer pads. This listing is for FOUR pads, enough to equip one machine. (Also available individually.) Tip: You'll need a 3/4" open end wrench (or adjustable wrench or pliers) to hold the s
6" BACKER PAD FOR CHERRYHILL FLOOR SANDERS: U-SAND, PRO, SUPERBEE CHERRYHILL PART # BP6 Authentic Cherryhill backer pad. This listing is for ONE pad; the machine requires a total of 4. (Also available as a set of 4 for a $10.00 savings.) Tip: You'll need a 3/4" open end wrench (or adjustable wrench or pliers)
SET OF 4 6" BACKER PADS + 4 BACKER PAD SAVERS FOR CHERRYHILL FLOOR SANDERS: U-SAND, PRO, SUPERBEE CHERRYHILL PART # BP6 Authentic Cherryhill parts. This listing is for FOUR pads and pad savers, enough to equip one machine. (Pads are also available individually.)
Pad Driver Plate Bearing Retaining Ring with Screws FOR CLARKE OBS-18 and OBS-18 DC Part # 66981A Includes the retaining ring and three screws as pictured. A 5/32 allen wrench is required for installation.
Dust Pipe Seal FOR CLARKE OBS-18 DC Part # 66981A This seal goes over the joint between the dust cover and the dust pipe to prevent leakage, and help keep the dust elbow from moving freely.
FAN COVER FOR CLARKE OBS-18 DC PART # 50275A Is your dust housing (the plastic cover on top of the motor) loose? Can you hear the fan rubbing on the inside of it? This is the part you need.
Original Authentic Clarke Fan and Drum belt set for Clarke EZ8 8" Beltsander. You will receive one each of part number 50916A and 50917A. Welcome to Brosson Floor Finishing Solutions!
Original Authentic Clarke Edger Paper Wrench for the Clarke Super 7 edger. Welcome to Brosson Floor Finishing Solutions! We are a Clarke Authorized Dealer
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
