plunger bag for sale, brand-new and used.

Click HERE to see our full selection of Height / Depth Gauges This is a 22" or 450 mm iGaging dial depth gauge Features:

SquareTrade © AP6.0 Brand New Starrett 657CZ Base And Post Assembly With 196B1 Indicator. International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.

New!!! Starrett 0.200" Travel Dial Test Indicator. Starrett Part Number 196A1Z.

Starrett 651A1Z Dial Indicator without Deep Hole Attachment

Starrett 651B5 Dial Indicator without Deep Hole Attachment,

Duty Plunger clamp that locks in extended or retracted position.30mm plunger travel.480 lbs holding capacityOil and Stain resistant red vinyl hand grips

Pneumatic toggle clamp holding cap.1136kg plunger stroke 28mm Part No.GH-36330-A (Cross ref.: destaco 830) Holding Force: 1136Kg Plunger Stroke: 28mm

Straight line action pneumatic toggle clamp,plunger stroke 7.5mm Part No.: 36301-A (cross ref.: destaco type 601) Pneumatic version of Model 301-a Holding Force: 45Kg

Pneumacit toggle clamp,holding cap.272kg,plunger stroke 19mm Part No.:36003-A (cross ref.:destaco type 803) Holding Force: 272Kg Plunger Stroke: 19.7mm

Good Hand Plunger type push pull hold down clamp....new Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when possible, if you are buying more than one item please wait for an invoice before paying. Be sure to view all pictures and ask any questions before you bid.

Kipp This listing is for five (5) Pull Knob Steel Metric Indexing Plunger, Style A, Non-Lockout M12 x 1.5, Hardened Pin, Novo-Grip Mushroom Knob Part Number: 03090-1206 Indexing plungers are used to prevent any change in locking position due to lateral forces. Pulling up on the handle retracts the plunger pin into the body. The body is made from steel with black oxide finish.

Enerpac Air Hydraulic Booster / Intensifier B - 3304 Enerpac Hydro-Pneumatic Booster/ Intensifier Part Number B-3304 Includes FZ-1610 and FZ-1619 adapters, Oil Reservoir and Hydraulic Oil. Aluminum Construction Ratio: 33:1 Air Piston: 8" Dia. Hydraulic Plunger: 1-3/8" Dia.

Second Generation (MKII) - May 2014 - Improved materials specs, New design This is a POLY URETHANE, MANUAL CAST kit to prevent melting/warping problem in long extrusions. It is an upgrade kit for the Delrin Plunger. It replaces the existing plunger in Makerbot Replicator 2X.

Second Generation (MKII) - December 2014 - Improved materials specs, New design This is a POLY URETHANE, MANUAL CAST kit to prevent melting/warping problem in long extrusions. It is an upgrade kit for the Delrin Plunger. It replaces the existing plunger in Makerbot Replicator 2.

(Blue) Makerbot Replicator 1 & 2 Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement: I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.

You are buying a Bowden style extruder plunger kit (right hand) as shown in the first image. Pictures are of the actual item you will get (stepper motor/drive gear not included). Key features:

(Red) Makerbot Replicator 1 & 2 Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement: I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.

(Red) Makerbot Replicator 1 & 2 Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement: I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.

(2) (Left and Right) (Red) Makerbot Replicator 1 & 2 Dual Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement:I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.