pneumatic shaft for sale, brand-new and used.

This is a Like New Pneumatic Numatics Rotary Actuator with end of stroke sensors, No. RW030A1AEZC1. The rotation is 90 degrees, 2 Position Sensing, 30 in.-lb and block overall length is 5 1/2" - Dynamic Thrust Load -646 lbf (2875 N).

(one) lot of pneumatic conveying equipment including (1) 6" x 42" tube with (2) 4" 45 degree ports , (1) 6" x 45" tube with (2) 4" 45 degree ports , (2) 4" gate valves , (4) 4" straights (approx. 12" each) , (14) 4" 45 degree fittings , (11) 4" couplings , Morris , (1) 2" gate valve , (1) 2" Ell , (2) 2" couplings , (2) 3" tubes , 24" and 42" , (4) 3" couplings , (2) flexible shaft valve actuators , (1) 8" diameter x 12" tube with 6" port at 45 degrees , approx.

This is a Flex Arm Deburrer. Essentially, it is a scissors type extension mechanism that holds a pneumatic deburring tool that has a chuck. It is 22-3/4" high and has a reach of about 40".

PNEUMATIC SCALE 6 HD CAPPERMODEL : A FRAMES/N : 21842 LINE SHAFT DRIVEN, HAS MACHINEMOUNTED 2A SORTER WITH SORTINGBOWL AND TURN-OVER CHUTE,PAINTED (GREY) MILD STEELFRAME, NO CONVEYOR OR TIMINGSCREW DRIVE, 21 1/2" CENTER TOCENTER INF TO DIS, GOODCONDITION AND WELL MAINTAINED.FOR PARTS OR FIX.COMES FROM AN AUCTION, WE HAVE NEVER INSTALLED BUT THE SELLER SAYS IT IS IN GOOD CONDITION, Refund or returns not accepted for this item " AS IS"

var itemNumber = window.ebayItemID ?

This auction is for a 5.25 horsepower Gast reversible pneumatic motor, model # 8AM-NRV-42A, powering a 2.5 horsepower Graco 225883 mixer. It clamps onto the side of the drum or whatever container you want to use. It has a maximum speed of 2500 rpm.

A very popular side exhaust pneumatic wet polisher from Gison. Specifications Air Consumption: 8 cfm / 0.22cmm Air Pressure: 90 psi RPM 4500 (free speed) Shaft: 5/8" - 11 Air inlet: 1/4" Npt Length: 9 in. (230mm) Vibration: 2.5 M/Sec Sound (Min)

Air Polisher For Wet Diamond Polishing Pads Sidewinder Pneumatic Water Polisher. For over 10 years i have been Rebuilding and refurbishing Alpha, Barranca, and MK Air Polishers.. So i developed a Hybrid Air polisher That Combinds all the Great qualities of Alpha, Barranca, and Mk into a Brand New Air Polisher called the Sidewinder Side Exhaust.

A very powerful side exhaust pneumatic wet polisher which is priced competitively. Specifications Air Consumption: 16cfm / 0.45cmm Air Pressure: 90 psi RPM 5000 (free speed) Shaft: 5/8" - 11 Air inlet: 1/4" Npt Length: 9 in. (230mm) Air Compressor: Required 5 HP Max.

CHICAGO PNEUMATIC MODEL # 3221 6000 RPM EXCELLENT CONDITION Red rubber coated body Because it is a straight shaft style it will get bumped around like an angle grinder doesn't. This one shows it has been used scratched a bit... but it shows no bad "BUMPS", or abuse.

Ingersoll Rand pneumatic grinder 9000 rpm 5/8 11 shaft tested in working order dose not come with air fitting or grinding wheel.

CHICAGO PNEUMATIC MODEL CP-797 1" AIR IMPACT WRENCH w/ D-HANDLE & FOUR (4) SOCKETS DESCRIPTION This Auction is for a Chicago Pneumatic Model CP-797 1" Drive Air Impact Wrench Impact Wrench has a 6" Extended Shaft & a D-Han

Sale is for One-USED FAWCETT BARREL / DRUM MIXER LID with Gast 2AM Pneumatic Motor This is a stainless steel lid This has a used Gas 2AM-NCC-16 air motor 1/2" x 1/2" stainless steel coupler This is used tested with scratches,a little dirt and some small paint spatter's No shaft or mixing prop is included they can be had at Zoro Tools or McMaster Carr Comes as shown The mixer in the photo

Sale is for One-USED FAWCETT BARREL / DRUM MIXER LID with Gast 2AM Pneumatic Motor This is a stainless steel lid This has a used Gas 2AM-NCC-16 air motor 1/2" x 1/2" stainless steel coupler This is used tested with scratches,a little dirt and some small paint spatter's No shaft or mixing prop is included they can be had at Zoro Tools or McMaster Carr Comes as shown The mixer in the photo