+ Post new Ad

Polishing Wheels

The average price for current category was $56.91 last month.

There are 5850 ads in this category.

17" 3M White Super Polishing & Low Speed Floor Buffing Pads, 4100 (MCO 08481)

17" 3m white super polishing & low speed floor buffing pads, 4100 (mco 08481)

  • Norristown, Pennsylvania, United States
  • Jan 30th
17" 3M Brown Stripping Pads, Low Speed Floor Pads, 7100 (MCO 08445)

17" 3m brown stripping pads, low speed floor pads, 7100 (mco 08445)

  • Norristown, Pennsylvania, United States
  • Jan 30th
20" 3M Tan Burnishing Pads, Hi Speed Floor Pads, 3400 (MCO 05606)

20" 3m tan burnishing pads, hi speed floor pads, 3400 (mco 05606)

  • Norristown, Pennsylvania, United States
  • Jan 30th
3M™ Ultra High-Speed Floor Pads, Tan Burnishing Pad 3400, 20in Diameter
24" 3M Red Floor Pads, Low Speed  Buffing Pads, 5100, 5 per Case (MCO 08399)

24" 3m red floor pads, low speed  buffing pads, 5100, 5 per case (mco 08399)

  • Norristown, Pennsylvania, United States
  • Jan 30th
3M™ Low Speed Floor Pads, Red Buffing Pad 5100, 24in Diameter
24" 3M Tan Burnishing Pads, Ultra High-Speed Floor Pads, 3500 (MCO 19012)

24" 3m tan burnishing pads, ultra high-speed floor pads, 3500 (mco 19012)

  • Norristown, Pennsylvania, United States
  • Jan 30th
LOT OF 10 MOUNTED GRINDING WHEELS 1/4 X1 1/2 X1/4 SHANK MACHINIST PORT POLISH

Lot of 10 mounted grinding wheels 1/4 x1 1/2 x1/4 shank machinist port polish

  • Springfield, Illinois, United States
  • Jan 30th
Lot of 10 grinding wheels 1 1/2 dia x 1/4 wide with a 1/4" shank. Never been used. PAYPAL preferred but will accept a m$ney $rder.
LOT OF 20 MOUNTED GRINDING WHEELS 3/4 X 3/4 WITH 1/4 SHANK MACHINIST PORT POLISH

Lot of 20 mounted grinding wheels 3/4 x 3/4 with 1/4 shank machinist port polish

  • Springfield, Illinois, United States
  • Jan 30th
Lot of 20 grinding wheels 3/4 dia x 3/4 long with a 1/4" shank. Never been used. PAYPAL preferred but will accept a m$ney $rder.
LOT OF 11 CRATEX ABRASIVE WHEELS VARIOUS SIZES ALL 1/4 HOLE" MACHINIST TOOL

Lot of 11 cratex abrasive wheels various sizes all 1/4 hole" machinist tool

  • Springfield, Illinois, United States
  • Jan 30th
Lot of 11 rubbberized abrasive wheels (4) 1/4x2 (2) 1/2x2 (2) 1x2 (3) 1/4x2 1/2 Never been mounted on anything. PAYPAL preferred but will accept a m$ney $rder. We only ship to US locations.
12 New 3M Scotch Brite 2"x1/4"x1/4" Aluminum Oxide Finishing Polishing Wheels

12 new 3m scotch brite 2"x1/4"x1/4" aluminum oxide finishing polishing wheels

  • Cobleskill, New York, United States
  • Jan 30th
12 New 3M Scotch Brite 2"x1/4"x1/4" Aluminum Oxide Finishing Polishing Wheels. Grade 5A FN, RPM 22100. .
NORTON SD400 DIAMOND GRINDING WHEEL SD400-R125B56-1/8 1A1

Norton sd400 diamond grinding wheel sd400-r125b56-1/8 1a1

  • Wadley, Alabama, United States
  • Jan 30th
NORTON SD400 DIAMOND GRINDING WHEEL SD400-R125B56-1/8 1A1 14" OD 6" HOLE 3/8" WIDTH 1/8" DEPTH
Gold 02857 Grinding Wheel 9x1/4x7/8 Type 27 Lot of 2

Gold 02857 grinding wheel 9x1/4x7/8 type 27 lot of 2

  • Huntsville, Alabama, United States
  • Jan 30th
MOOSE TRADING LLC 251-650-2219
Diamond-Grinding-Block-Edco-Floor-Surface-35-40-50-Grit-concrete-terrazzo-grind

Diamond-grinding-block-edco-floor-surface-35-40-50-grit-concrete-terrazzo-grind

  • Potomac, Maryland, United States
  • Jan 30th
Diamond-Grinding-Block-Edco-Floor-Surface-35-40-50-Grit-concrete-terrazzo-grind.Size:2x2x4
3M 55743 Combi- Flap Wheel 4-1/2" x 4" x 5/8-11 threaded center A 150 grade USA

3m 55743 combi- flap wheel 4-1/2" x 4" x 5/8-11 threaded center a 150 grade usa

  • United States
  • Jan 30th
This listing is for my one and only Scotch-brite Combi-flap wheel Specs are above
3M 55749 HS Flap Wheel 4-1/2" x 4" x 5/8-11 threaded center 7 A COARSE USA

3m 55749 hs flap wheel 4-1/2" x 4" x 5/8-11 threaded center 7 a coarse usa

  • United States
  • Jan 30th
This listing is for my one and only HS -flap wheel Specs are above
6" Grinding Wheel For Bench Grinders - Six Inches Wide by 3/4 Inch with 1/2 Arbo

6" grinding wheel for bench grinders - six inches wide by 3/4 inch with 1/2 arbo

  • Sterling Heights, Michigan, United States
  • Jan 30th
6" Grinding Wheel For Bench Grinders - Six Inches Wide by 3/4 Inch with 1/2 Arbo 9.99
Flexon by Flexovit 4-1/2" - ZA30T Depressed Center Wheel A0714H Grinding Disk

Flexon by flexovit 4-1/2" - za30t depressed center wheel a0714h grinding disk

  • Sterling Heights, Michigan, United States
  • Jan 30th
Flexon by Flexovit 4-1/2" - ZA30T Depressed Center Wheel A0714H Grinding Disk
CENTER LESS GRINDING WHEEL NORTON 57A80 MGVBE 12.01 X 2.360 X 5

Center less grinding wheel norton 57a80 mgvbe 12.01 x 2.360 x 5

  • Boiling Springs, South Carolina, United States
  • Jan 30th
CENTER-LESS GRINDING WHEEL NORTON 57A80 M6VBE 12.01 X 2.360 X 5 Part # 57A80-MGVBE-C2138420-1 C511734 There's 1 wheel in this package Get a Seal ! For the cost ! compare!and see for you self
GRINDING WHEEL NORTON A120 X9V Max.2485 RPM 10"L X 3.5" W X 5" ID Mounting hole

Grinding wheel norton a120 x9v max.2485 rpm 10"l x 3.5" w x 5" id mounting hole

  • Boiling Springs, South Carolina, United States
  • Jan 30th
GRINDING WHEEL NORTON A120 X9V Max.2485 RPM L2141613-1 A513526 10L x 3.5W x 5 "ID Mounting Hole Aluminium Oxide 120 with a fine to very fine cut , X Grade is hard , 9 is a medium structure, and V Bond type is Vitrified.
1set 20pcs 6mm pad Sanding Disc Polishing Wheel Cut Wheel Set For Electric Drill

1set 20pcs 6mm pad sanding disc polishing wheel cut wheel set for electric drill

  • hong kong, Hong Kong
  • Jan 30th
6mm pad Sanding Disc Polishing Wheel Cut Wheel Set For Electric Drill Description: 2*Wrench 1*Connection 2*Platen 1*Polished piece of metal 1*Metal cutting discs 1*Diamond cutting discs 1*Wood Sandpaper 1*Wool polishing wheel 1*Self-adhesive disc 1*Fiber wheels 1*Woodworking saw blade 30 teeth 1*Hundreds of impeller 1*Marble Machine Saw 5*80 mesh flocking sandpaper (Note:This is 6mm shank diameter,I also have 10mm shank diameter.) Package content: 1 set 20 pcs
Set of Three NORTON GRINDING WHEEL 38A60-L8V 3X1/2 MAX 8280 RPM #AW217

Set of three norton grinding wheel 38a60-l8v 3x1/2 max 8280 rpm #aw217

  • Waynesville, Georgia, United States
  • Jan 30th
These grinding wheels have never been used. If you need more information, please ask.

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies