Polyethylene & HDPE Materials (Plastic & Elastic Materials) for sale, page 18

Hdpe bar strips white .020" x 6.0" x 25 ft roll

Byron Center, Michigan, United States
Jun 2nd

HDPE Bar Strips White .020" x 6.0" x 25 Ft Roll Thickness Tolerance +/-.003" Width Tolerance +/-1/8" Length Tolerances are +/-1.0" HDPE is more rigid and harder than low density materials and is three times better in compressive strength. HDPE complies with FDA requirements for direct food contact applications. It is also accepted by USDA, NSF and Canadian Department of Agriculture.

Hdpe bar strips white .125" x 1.0" x 25 ft roll

Byron Center, Michigan, United States
Jun 2nd

HDPE Bar Strips White .125" x 1.0" x 25 Ft Roll Thickness Tolerance +/-.005" Width Tolerance +/-1/8" Length Tolerances are +/-1.0" HDPE is more rigid and harder than low density materials and is three times better in compressive strength. HDPE complies with FDA requirements for direct food contact applications. It is also accepted by USDA, NSF and Canadian Department of Agriculture.

Hdpe bar strips white .020" x 1.0" x 100 ft roll

Byron Center, Michigan, United States
Jun 2nd

HDPE Bar Strips White .020" x 1.0" x 100 Ft Roll Thickness Tolerance +/-.003" Width Tolerance +/-1/8" Length Tolerances are +/-1.0" HDPE is more rigid and harder than low density materials and is three times better in compressive strength. HDPE complies with FDA requirements for direct food contact applications. It is also accepted by USDA, NSF and Canadian Department of Agriculture.

Hdpe bar strips white .125" x 2.0" x 10 ft roll

Byron Center, Michigan, United States
Jun 2nd

HDPE Bar Strips White .125" x 2.0" x 10 Ft Roll Thickness Tolerance +/-.005" Width Tolerance +/-1/8" Length Tolerances are +/-1.0" HDPE is more rigid and harder than low density materials and is three times better in compressive strength. HDPE complies with FDA requirements for direct food contact applications. It is also accepted by USDA, NSF and Canadian Department of Agriculture.

Hdpe bar strips white .050" x 4.0" x 10 ft roll

Byron Center, Michigan, United States
Jun 2nd

HDPE Bar Strips White .050" x 4.0" x 10 Ft Roll Thickness Tolerance +/-.005" Width Tolerance +/-1/8" Length Tolerances are +/-1.0" HDPE is more rigid and harder than low density materials and is three times better in compressive strength. HDPE complies with FDA requirements for direct food contact applications. It is also accepted by USDA, NSF and Canadian Department of Agriculture.

Hdpe bar strips white .063" x 1.0" x 25 ft roll

Byron Center, Michigan, United States
Jun 2nd

HDPE Bar Strips White .063" x 1.0" x 25 Ft Roll Thickness Tolerance +/-.005" Width Tolerance +/-1/8" Length Tolerances are +/-1.0" HDPE is more rigid and harder than low density materials and is three times better in compressive strength. HDPE complies with FDA requirements for direct food contact applications. It is also accepted by USDA, NSF and Canadian Department of Agriculture.

Hdpe bar strips white .031" x 2.0" x 25 ft roll

Byron Center, Michigan, United States
Jun 2nd

HDPE Bar Strips White .031" x 2.0" x 25 Ft Roll Thickness Tolerance +/-.003" Width Tolerance +/-1/8" Length Tolerances are +/-1.0" HDPE is more rigid and harder than low density materials and is three times better in compressive strength. HDPE complies with FDA requirements for direct food contact applications. It is also accepted by USDA, NSF and Canadian Department of Agriculture.

Hdpe bar strips white .050" x 1.0" x 25 ft roll

Byron Center, Michigan, United States
Jun 2nd

HDPE Bar Strips White .050" x 1.0" x 25 Ft Roll Thickness Tolerance +/-.005" Width Tolerance +/-1/8" Length Tolerances are +/-1.0" HDPE is more rigid and harder than low density materials and is three times better in compressive strength. HDPE complies with FDA requirements for direct food contact applications. It is also accepted by USDA, NSF and Canadian Department of Agriculture.

Hdpe bar strips white .040" x 1.0" x 25 ft roll

Byron Center, Michigan, United States
Jun 2nd

HDPE Bar Strips White .040" x 1.0" x 25 Ft Roll Thickness Tolerance +/-.003" Width Tolerance +/-1/8" Length Tolerances are +/-1.0" HDPE is more rigid and harder than low density materials and is three times better in compressive strength. HDPE complies with FDA requirements for direct food contact applications. It is also accepted by USDA, NSF and Canadian Department of Agriculture.

Polyethylene sheet hdpe sheet .035 thick 44" x 50" moq-5 sheets

Memphis, Tennessee, United States
Jun 2nd

High Density Polyethylene (HDPE) Sheeting opaque, natural gloss, matte

5/8" x 4ft hdpe white polyethylene plastic rods (bundle of 20)

Venice, Florida, United States
Jun 2nd

5/8" x 4Ft HDPE White Polyethylene Plastic Rods (Bundle of 20) MSRP: $78.00 (Bundle of 20) Open box unused inspected item. Sold as pictured. You are buying 1 Bundle of 20 4FT Plastic Rods.

Polyethylene plastic sheet .060" x 24" x 48" - hdpe black

Watsonville, California, United States
Jun 2nd

Item: Polyethylene Plastic Sheet .060" x 24" x 48" - HDPE Black Item Condition: NEW, more pics coming soon Item Description HDPE (High-Density Polyethylene) is an extremely versatile product with outstanding properties and good chemical resistance for a wide variety of applications. HDPE has a low coefficient of friction and can be easily cut, machined, welded, and thermoformed for easy fabrication. This material will not splinter, rot or retain harmful bacteria, and is extremely

Leister extrusion gun, hdpe pipe welder

California, United States
Jun 2nd

Please read details before bidding 1- We want positive feedback.

Roots blower 616 rsc v

Newark, New Jersey, United States
Jun 2nd

used roots blower with 100hp motor including one silencer.

Hdpe (high density polyethylene) black plastic sheet 3/8" x 12" x 24"

Johnstown, Ohio, United States
Jun 2nd

I have 15 of these available. Minimum dimensions 3/8 thick 11" to 12" x 36 1/2. They may have very light surface scratches from moving them.

Ldpe linear low density polyethylene tubing 500 feet green

Burley, Idaho, United States
Jun 2nd

LLDPE LINEAR LOW DENSITY POLYETHYLENE TUBING 500 FEET GREENINSIDE DIA. 0.1700OUTSIDE DIA. 1/4"MAX PSI 205.000 SHIPPING: *Item will be shipped with USPS.

Lldpe linear low density polyethylene tubing 500 feet blue

Burley, Idaho, United States
Jun 2nd

This listing is for one roll of LLDPE LINEAR LOW DENSITY POLYETHYLENE TUBING 500 FEET BLUE INSIDE DIA. 0.1700OUTSIDE DIA. 1/4"MAX PSI 205.000 SHIPPING: *Item will be shipped with USPS.

Demtech pro-x4 extrusion welder high output extrusion welder

Kitchener, Ontario, Canada
Jun 2nd

Demtech Pro-X4 Extrusion Welder High Output Extrusion Welder Used, good overall condition Demtech Pro-X4. Unit comes in shipping/carrying case with several heads as pictured. 30 day warranty.

8mm simona ® eva flexible sheet

Pinellas Park, Florida, United States
Jun 1st

Hdpe / sanatec (plastic cutting board) green - 24" x 36" x 1/2" thick (nominal)

West Nyack, New York, United States
Jun 1st