+ Post new Ad
Portable Woodworking Sewing Machine Splicer Veneer Stitcher Flat Seamer Jionter, US $7600 – Picture 0
Portable Woodworking Sewing Machine Splicer Veneer Stitcher Flat Seamer Jionter, US $7600 – Picture 0

Portable Woodworking Sewing Machine Splicer Veneer Stitcher Flat Seamer Jionter

US $7600

  • HK, China
  • Jul 5th
Open on mobile:
QR code
DESCRIPTION: Application: Widely used in advanced parquet, veneer, dining table, veneer veneer, office furniture, flooring, curved wood, bed mother, etc. Specification: Normal AC voltage: AC 220V( Do not support 110V) Net weight: 1.5kg Splicing Thread Length:1300M Melting Point of the thread:120C Threading steps: 1. Insert the heat pipe into the barrel tray hole 2. Put the glue thread into the thread stop wheel first, then thread the lead needle 3. Pass the lead pin into the top hole of the heat pipe until the lower end exposes the lead pin 4. Clamp the exposed pin end and pull it down 5. The glue line is pressed by the bottom of the pressure roller Operating steps: 1. Lightly lift the machine and lightly press the roller on the surface of the veneer. The main heat pipe does not touch the veneer. 2. Keep the pressure roller and the roller at the same horizontal line, push down and push forward 3. After completion, please do not lift the machine and pull it back. Please follow the instructions to automatically cut off. 4. After cutting, the line is caught by the stop wheel. If you need to operate, pull the glue line back to the rubber pressure wheel. Package Included: 1x Woodworking Sewing Machine 1x Temperature Control Switch 2x J6 Splicing Threads NOTE we don't ship the item to PO BOX address and we only ship the item to English address, so please leave us your physical English address when you pay.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Unbranded
Splicing Thread Length 1300M
MPN Does Not Apply
Melting Point of the thread 120C
Normal AC voltage AC 220V( Do not support 110V)
UPC Does not apply

Directions

Similar products from Other Woodworking Equipment & Machines

Ramco Wide Belt Sander 13T75 13"

Ramco Wide Belt Sander 13T75 13"

  • Solon, Ohio, United States
  • Jul 5th
delta rockwell Shaper small And Medium Table Insert.

delta rockwell Shaper small And Medium Table Insert.

  • Denville, New Jersey, United States
  • Jul 5th
COIMA SHK 2 Dust Collector

COIMA SHK 2 Dust Collector

  • Fort Myers, Florida, United States
  • Jul 5th
Portable Durable Micro Wheel Marking Gauge Kits Woodwork Cutter Adjuster Scriber

Portable Durable Micro Wheel Marking Gauge Kits Woodwork Cutter Adjuster Scriber

  • Shenzhen, China
  • Jul 5th
Oneida Dust Deputy Cyclone Air System, Molded Plastic DIY Install Dust Collector

Oneida Dust Deputy Cyclone Air System, Molded Plastic DIY Install Dust Collector

  • Shelton, Washington, United States
  • Jul 5th
Powermatic Model 81 Bandsaw

Powermatic Model 81 Bandsaw

  • New Berlin, Wisconsin, United States
  • Jul 5th
Dynabrade 58430 DynaLocke 5" Dual-Action Sander NON VAC

Dynabrade 58430 DynaLocke 5" Dual-Action Sander NON VAC

  • Jacksonville, Florida, United States
  • Jul 5th
J-41002 2"x42" Bench Belt and Disc Sander 577

J-41002 2"x42" Bench Belt and Disc Sander 577

  • Joliet, Illinois, United States
  • Jul 5th
The Dust Deputy Deluxe Anti-Static Cyclone Separator 5 Gallon Kit

The Dust Deputy Deluxe Anti-Static Cyclone Separator 5 Gallon Kit

  • Phoenix, AZ, United States
  • Jul 5th
220V Woodworking Sewing Machine Splicer Veneer Stitching Paste Parquet Tools

220V Woodworking Sewing Machine Splicer Veneer Stitching Paste Parquet Tools

  • HK, China
  • Jul 5th
Portable Splicer Veneer Stitching Paste Parquet Tools Woodworking Sewing Machine

Portable Splicer Veneer Stitching Paste Parquet Tools Woodworking Sewing Machine

  • HK, China
  • Jul 5th
Companion Sears Drill Press Depth Shaft Plunge Handle

Companion Sears Drill Press Depth Shaft Plunge Handle

  • Beaver Meadows, Pennsylvania, United States
  • Jul 5th
Triton TSPSP650 650W Portable Oscillating Spindle Sander

Triton TSPSP650 650W Portable Oscillating Spindle Sander

  • Miami, FL, United States
  • Jul 4th
Wilton LP4 4-Inch Low-Profile Drill Press Vise 11744

Wilton LP4 4-Inch Low-Profile Drill Press Vise 11744

  • Miami FL, United States
  • Jul 4th
Vintage Rockwell Canada 505 Heavy Duty Sander 3 Amp - Tested Works! Free Ship

Vintage Rockwell Canada 505 Heavy Duty Sander 3 Amp - Tested Works! Free Ship

  • Ottawa, Canada
  • Jul 4th
Dust Separator Cyclone Dust Collector Kit for Use with Barrels Trash Cans 4 Inch

Dust Separator Cyclone Dust Collector Kit for Use with Barrels Trash Cans 4 Inch

  • World Wide, United States
  • Jul 4th
Hitachi 500432Z Cord Electrical 2 Wires Part

Hitachi 500432Z Cord Electrical 2 Wires Part

  • Miami, Florida, United States
  • Jul 4th
JET DC-1100VX 5-Micron Filter and Collection Bag Kit 708636MF

JET DC-1100VX 5-Micron Filter and Collection Bag Kit 708636MF

  • Miami, FL, United States
  • Jul 4th
Delta Single Stage 650 CFM Dust Collector

Delta Single Stage 650 CFM Dust Collector

  • Canonsburg, Pennsylvania, United States
  • Jul 4th
Vintage BLACK DIAMOND Saw & Mach. Wks. "WRIGHT" One Set Guide Jaws No. 1

Vintage BLACK DIAMOND Saw & Mach. Wks. "WRIGHT" One Set Guide Jaws No. 1

  • Marseilles, Illinois, United States
  • Jul 4th

People who viewed this item also vieved

Delta Mortising Attachment Kit

Delta Mortising Attachment Kit

  • Scranton, Pennsylvania, United States
  • Jan 30th
Cincinnati Brickford Large Drill Press with Vise

Cincinnati Brickford Large Drill Press with Vise

  • Whiteland, Indiana, United States
  • Jan 30th
Commander Model 424 Multiple Drill Head w/ 4 Spindles

Commander Model 424 Multiple Drill Head w/ 4 Spindles

  • Shelbyville, Kentucky, United States
  • Jan 30th
Jackson 07320-002-86-70 36 Compartment rack (4-1/8" tall)

Jackson 07320-002-86-70 36 Compartment rack (4-1/8" tall)

  • Monsey, New York, United States
  • Jan 30th
NEW POWERMATIC 4224B WOOD LATHE 1794224K FREE Shipping! Make an Offer

NEW POWERMATIC 4224B WOOD LATHE 1794224K FREE Shipping! Make an Offer

  • Phoenix, Arizona, United States
  • Jan 30th
GT-ISL-50 Industrial Slant Combination Gang & Turret Lathes

GT-ISL-50 Industrial Slant Combination Gang & Turret Lathes

  • Santa Ana, California, United States
  • Jan 30th
3D MODEL RELIEF STL FOR CNC ROUTER MILL #301

3D MODEL RELIEF STL FOR CNC ROUTER MILL #301

  • Nizhny Novgorod, default, Russian Federation
  • Jan 30th
3D MODEL RELIEF STL FOR CNC ROUTER MILL #278

3D MODEL RELIEF STL FOR CNC ROUTER MILL #278

  • Nizhny Novgorod, default, Russian Federation
  • Jan 30th
3D MODEL RELIEF STL FOR CNC ROUTER MILL #271

3D MODEL RELIEF STL FOR CNC ROUTER MILL #271

  • Nizhny Novgorod, default, Russian Federation
  • Jan 30th
HARD TO FIND ORIGINAL RANKIN BROS APEX 16" INDUSTRIAL DISC SANDER

HARD TO FIND ORIGINAL RANKIN BROS APEX 16" INDUSTRIAL DISC SANDER

  • Fountain Valley, California, United States
  • Jan 30th
3M Cloth Disc 463D, 7 in x 7/8 in 120 Y-weight 50 Per Box 051144-01613 Resin

3M Cloth Disc 463D, 7 in x 7/8 in 120 Y-weight 50 Per Box 051144-01613 Resin

  • Nashwauk, Minnesota, United States
  • Jan 30th
100pcs - 3m Scotch-Brite Hookit 29292 - 5" No Hole VFN Orbital Sander Disc Pads

100pcs - 3m Scotch-Brite Hookit 29292 - 5" No Hole VFN Orbital Sander Disc Pads

  • Dallas, Texas, United States
  • Jan 30th
AMERICAN WOODWORKING MACHINERY X36AF Uni-Point Radial Saw 7.5 hp -NORTHFIELD 1

AMERICAN WOODWORKING MACHINERY X36AF Uni-Point Radial Saw 7.5 hp -NORTHFIELD 1

  • Ridgewood, New York, United States
  • Jan 30th
GENUINE CUTAWL #0 CHISEL BLADES, PACK OF 10; 1STAWARD BLADES jig scroll saw

GENUINE CUTAWL #0 CHISEL BLADES, PACK OF 10; 1STAWARD BLADES jig scroll saw

  • United States
  • Jan 30th
Laguna TSS 12" table saw with scoring and sliding table

Laguna TSS 12" table saw with scoring and sliding table

  • Raleigh, North Carolina, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies