powermatic planers for sale, brand-new and used.

Document Title: Powermatic Model 221 Planer Operating Instructions and Parts List Number Of Pages: 16 Condition Of Original: Very Good Scan Type: Black & White Scan of a Black & White Manual Scan Quality: Good Description: This manual contains operating and parts information on Powermatic model 221 Planers starting at serial number 5525 and up.

This is knife setting gauge that will work on planers with a 3-3/16" head. This will cover nearly all of the 20" planers avvailable, Jet, Powermatic, etc. Check your handbook for the actual size as it does make a difference.

This is a set of two clutch shifting pins for the Powermatic 16" and 18" heavy duty planers. These do wear and eventually the planer will not stay in gear and feed. Press out the bad and press in the new and you're good to go.

This is Jet no. JWP15H-312. It is also Powermatic no.

This is Jet no. JWP15H-304. It is also Powermatic no.

This is a set of 5 gib screws that fit the Jet/Powermatic planers. This screw works in the 15", 16", and 20" planers. The thread is 8mm x 1 pitch.

This is Jet no. JWP15H-309. It is also Powermatic no.

More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website Rec # 2461 (1) Used 6" POWERMATIC Model 33 Pedestal-Mounted Belt Sander; S/N 433264 Specifications: Belt Size (flat)..........................................6" Wide x 10" Long Overall Belt Size.......................................49" Table Size................................................16" R-L x 7" F-B Motor......................................................N/A

Powermatic grinder setup with new wheels and belt. Excellent condition.

DESCRIPTION: 4, NEW OLD STOCK PACKS OF 10 INSERTS FOR PLANER HEADS. THEY MEASURE 14MM X 14MM X 2. .

Variable speed pulley, spring loaded, metric. 19mm Bore with 8mm keyway. Pulley OD 120mm (4.7") Will fit 16mm, (5/8") wide belt.

This is knife setting gauge that will work on planers with a 2-7/8" head. This will cover nearly all of the 15" planers available, Jet, Powermatic, etc. Check your handbook for the actual size as it does make a difference.

DESCRIPTION: 5, NEW OLD STOCK PACKS OF 10 INSERTS FOR PLANER HEADS. THEY MEASURE 14MM X 14MM X 2. .

This is the gearbox gasket for the Jet 15", 16", and 20" planers and the Powermatic 15" and 20" planers. This is Jet no. JWP15H-336.

This is the chip deflector for most 15" planers. This deflector directs the chips out the shoot and keeps them from being pulled down the back side of the head and getting pressed into the planed board. They will also get sucked back under the knives and get cut again.

This is a set of 4 V2 HSS planer knives. The dimensions are 20" x 1" x 1/8". They will fit the Powermatic 209, Jet JWP208, Grizzly, Sunhill, General, Northwood, Northstate and other machines not listed.

ONE, (1), Grinding wheel for Powermatic knife grinders on model 100, 160, 189, 221, and 224 as well as 225 planers. Exact match to original. Same grit, friability, and manufacturer.

Bottom plate for Powermatic PM180 planers, this plate covers the base of the planer, underneath the planer bed.

Powermatic Grinder Bar CarriageFits Powermatic Planer Model 225 Used Grinder Bar Carriage Fits 24 inch Powermatic Planers Please call (360 683-8263) with your zip code so we can get a freight price for you. Item ships from zip code 98382.Weight 98 lbs (includes shipping crate).