Powerstat Variable Transformer 1160 1.4 KVA 1400 Watts 10 Amps 0 - 140 Volts, US $76.00 – Picture 0

Powerstat Variable Transformer 1160 1.4 KVA 1400 Watts 10 Amps 0 - 140 Volts, US $76.00 – Picture 1

Powerstat Variable Transformer 1160 1.4 KVA 1400 Watts 10 Amps 0 - 140 Volts, US $76.00 – Picture 2

Powerstat Variable Transformer 1160 1.4 KVA 1400 Watts 10 Amps 0 - 140 Volts, US $76.00 – Picture 3

Powerstat Variable Transformer 1160 1.4 KVA 1400 Watts 10 Amps 0 - 140 Volts, US $76.00 – Picture 4

Powerstat Variable Transformer 1160 1.4 KVA 1400 Watts 10 Amps 0 - 140 Volts, US $76.00 – Picture 5

Powerstat Variable Transformer 1160 1.4 KVA 1400 Watts 10 Amps 0 - 140 Volts, US $76.00 – Picture 6

Powerstat Variable Transformer 1160 1.4 KVA 1400 Watts 10 Amps 0 - 140 Volts, US $76.00 – Picture 7

Powerstat Variable Transformer 1160 1.4 KVA 1400 Watts 10 Amps 0 - 140 Volts, US $76.00 – Picture 8

Powerstat Variable Transformer 1160 1.4 KVA 1400 Watts 10 Amps 0 - 140 Volts, US $76.00 – Picture 9

Powerstat Variable Transformer 1160 1.4 KVA 1400 Watts 10 Amps 0 - 140 Volts, US $76.00 – Picture 10

Powerstat Variable Transformer 1160 1.4 KVA 1400 Watts 10 Amps 0 - 140 Volts, US $76.00 – Picture 11

Powerstat Variable Transformer 1160 1.4 Kva 1400 Watts 10 Amps 0 - 140 Volts

US $76.00

Berkley, Michigan, United States
Jun 9th

Open on mobile:
QR code

Powerstat Variable Transformer 1160 1.4 KVA 1400 Watts 10 Amps 0 - 140 Volts (Sometimes called "Variac") RECONDITIONED- Cleaned thoroughly inside & out Windings & wiper cleaned for perfect output voltage control (See Testing Below) ======================================================================================================= Powerstat Variable Transformer (Sometimes called "Variac") Non-Isolation Type Case Is Isolated 10 Amps at Full Rated Voltage of 140 vac As the voltage is decreased, the amperage is increased. The VA rating remains at 1400. BENCH, PANEL OR ENCLOSURE MOUNTABLE- The shaft can be repositioned for panel or enclosure (cabinet) mounting. The knob and dial will be on your panel. What is now the base will bolt to your panel. As-Seen, it is set up for bench mounting or free standing use. The wiper moves smoothly enough that one does not have to hold the unit while turning the dial. No mounting is necessary. MODEL- 1168 RATING- Zero to 140 Volts AC 10 Amps 1.4 KVA (1400 VA OR 1400 Watts at 1.0 PF) PRIMARY CONNECTION- Bare End, Tinned Conductors (Line & Neutral) Cord Exit takes standard 5/8 x 1/2" snap-in cord grip (A hardware store item) SECONDARY CONNECTION- NEMA 1-15R Single Receptacle Outlet 15a 125v UL Listed Amphenol Brand FUSING- None- Fuse Holder Is Bypassed Standard Nominal 1/2" panel mount (Example Bussman HKP Series) Holder is present, but cap is missing Future Fusing- Snip the jumper across the fuse holder terminals & install fuse & cap (1/4 x 1-1/4 glass fuse) Panel mount fuse holders are available on line, at Radio Shack & most hardware stores Option- Panel Mount Push Circuit Breaker 10 amp SWITCHING- The 2PST switch interrupts line (primary) side voltage. (Removing all power from the transformer) TESTING- Volts As-Tested With True RMS Meter: Low End Of Scale = 0.031 volts Mid Scale = 73.4 volts High End Of Scale = 144.5 volts Volts As-Tested With Averaging Meter Low End Of Scale = 0 volts Mid Scale = 70.1 volts High End Of Scale = 140.0 volts WIRING DIAGRAM- The wiring plate is diagrammed. If you would like a printed wiring diagram, send me a note when you checkout & I'll include a copy. (CAD as Printed PDF) DIMENSIONS- Maximum Height With Knob = 5-1/2" Maximum Body Diameter = 4-5/8" Diameter Including Wiring Compartment = 6-3/8" MOUNTING PLATE MEASUREMENTS- Please See Photos CONDITION- Some paint fading & scratching Some scratching on the adjusting knob One very small ding in the case on the top edge (Visible in photo) Slight denting of a few vent slots (Visible in photos) ====================================================================================== SHIPPING- Your transformer will ship promptly. I usually can ship the same day as your payment is posted There are a few options under the 'Shipping' tab. Please check them all, as eBay tends to show the most costly option first. Priority Mail will have insurance All US shipment will have a tracking number. Non-US shipping has limited tracking. ====================================================================================== RETURNS- If you change your mind, returns are accepted. Shipping is not refunded. The unit is 100% functional. A returned unit must also be functional. I apologize for being strict, but I have sold transformers and had them come back 'shorted to death'.

Condition	Seller refurbished : An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details.
Seller Notes	“Unit Works Perfectly & Windings Are Spotless Please See Item Description”