precision ground shaft for sale, brand-new and used.

This 5420-182 Eaton Hydrostatic-Hydraulic Variable Piston Pump is re-manufactured, back to Eaton OEM specs using Eaton hydrostatic-hydraulic parts (we are repairing your unit). This Eaton hydrostatic-hydraulic variable piston pump uses a CCW rotation, uses code 61 ports,1.28/.98-charge pump,1 3/8 taper spline shaft-manual w/wide band neutral lock lever control-.057 orifice and CCB, name plate and trunnions.

This 5420-213 Eaton Hydrostatic-Hydraulic Variable Piston Pump is re-manufactured, back to Eaton OEM specs using Eaton hydrostatic-hydraulic parts (we are repairing your unit). This Eaton hydrostatic-hydraulic variable piston pump uses a CCW rotation, uses code 61 ports,1.28-charge pump, 23 tooth/spline shaft-manual w/neutral lockout switch & IPOR control-.073 orifice and IPOR set at 5500+/- 100 PSI gauge ports with plugs.

SquareTrade © AP6.0 PHD HEAVY DUTY AIR SLIDE CYLINDER 2 3/8" STROKE SGC56x60-BB-CB-DB-GY-L4-U8 This is a Pneumatic PHD 2 3/8"(60mm) Stroke High Load Air Slide -40MM Bore, Model SGC56x60-BB-CB-DB-GY-L4-U8. This slide has 2 3/8" Inches of Stroke, the 2 guide pins measures 1"(25MM) diameter and piston measures 5/8"(16MM). Four bushings allow two hardened precision

American Carbide Tool Carbide-Tipped Tool Bit for Lead Angle Turning, Left Hand, 370 Grade, 0.4375" Square Shank, BL 7 Size The American Carbide Tool BL-style 370 grade carbide-tipped brazed tool bit has a left-hand cutting direction and a 15-degree side cutting angle for roughing and heavy machining when

American Carbide Tool PCD Tool Bit for Lead Angle Turning, Left Hand, PCD Grade, 0.5" Square Shank, BL 8 Size The American Carbide Tool BL-style PCD-tipped brazed tool bit has a left-hand cutting direction and a 15-degree side cutting angle for finishing operations when lead angle turning, light planing, boring, milling, and facing on nonferrous and nonmetallic materials.

American Carbide Tool Carbide-Tipped Tool Bit for Lead Angle Turning, Right Hand, C2 Grade, 0.25" Square Shank, BR 4 Size The American Carbide Tool BR-style C2 grade carbide-tipped brazed tool bit has a right-hand cutting direction and a 15-degree side cutting angle for lead angle turning, light planing, boring, milling, and facing on cast iron and nonferrous materials.

American Carbide Tool Carbide-Tipped Tool Bit for Offset End Cutting, Left Hand, 370 Grade, 0.75" Square Shank, FL 12 Size The American Carbide Tool FL-style 370 grade carbide-tipped brazed tool bit has a left-hand cutting direction and a 0-degree end cutting angle for roughing and heavy machining when offset turning, facing, boring, or straddle facing on steel and steel alloys.

American Carbide Tool Carbide-Tipped Tool Bit for Offset End Cutting, Left Hand, 883 Grade, 0.75" Square Shank, FL 12 Size The American Carbide Tool FL-style 883 grade carbide-tipped brazed tool bit has a left-hand cutting direction and a 0-degree end cutting angle for offset turning, facing, boring, or straddle facing on cast iron and nonferrous materials.

American Carbide Tool Carbide-Tipped Tool Bit for 30 & 45 Degree Boring The American Carbide Tool TSE-style C2 grade carbide-tipped brazed tool bit has a left-hand cutting direction for boring to a square shoulder in 45-degree bars on cast iron and nonferrous materials. The TSE-style tool shape has a 45-degree side cutting angle, a left-hand cutting direction for left-to-right feed, and a high positive, 12-degree rake angle that provides a sharp edge for making continuous cuts.

American Carbide Tool Carbide-Tipped Tool Bit for Cutoff, Neutral, C6 Grade, 0.5" Square Shank, CT 120 Size The American Carbide Tool CT-style C6 grade carbide-tipped brazed tool bit has a right-hand cutting direction for cutoff or grooving on steel and steel alloys. The CT-style, also called COR-style, tool shape has a 5-degree end cutting angle and a taper on the non-cutting side for cutoff or grooving of solid bars and tubing stock, and a right-hand cutting direction for right-to-left feed.

American Carbide Tool Carbide-Tipped Tool Bit for 45 Degree Boring, Right Hand, C5 Grade, 0.3125" Round Shank, TRE 5 Size The American Carbide Tool TRE-style C5 grade carbide-tipped brazed tool bit has a left-hand cutting direction for roughing or heavy machining when boring to a square shoulder in 45-degree bars on steel and steel alloys. The TRE-style tool shape has a 45-degree side cutting angle and a positive, 6-degree rake angle that provides a sharp edge for making continuous cuts.

American Carbide Tool Carbide-Tipped Tool Bit for Offset Side Cutting, Left Hand, C2 Grade, 0.5" Square Shank, GL 8 Size The American Carbide Tool GL-style C2 grade carbide-tipped brazed tool bit has a left-hand cutting direction and a 0-degree side cutting angle for offset turning, facing, and boring on cast iron and nonferrous materials. The GL-style tool shape has an offset that allows its side cutting edge to be used close to chuck jaws on a lathe or for boring mill applications.

eBay Template v2.5

This auction is for one brand new DIYGrinder.com 4" x 2 1/4" drive wheel for your belt grinder. These are perfect for knife making. The wheel is precision cnc turned and is bored to fit a 5/8" (.625") drive shaft.

Due to many requests I made up a few 5" drive wheels. A 5" drive wheel moves 15.7" of belt per RPM vs 12.5" for a 4" drive wheel. With a 5" wheel you can get the really high belt speeds needed for super fast metal removal.

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy