Press Wax Of Kulakov Bees Beekeeping Tools

US $94

Kharkov, Kharkivkay, Ukraine
Oct 21st

Open on mobile:
QR code

Wax press Kulakov (PWK-1) Product description Made of stainless steel grade AISI 304 are made of stainless steel grade AISI 304. It is used to produce high-quality wax. Equipment: The cooking vessel (thickness 0.5 mm) Linen bag The separator (upper and lower mesh) (1.5 mm thick) Water heater with heat fixed temperature 90 ° C Actuator Stock Lever arm stopper Disc To Videos Preparation: 1. Set VPK- 1 on a horizontal surface 2. Remove the separator from the cooking pot 3. Remove the actuator 4. Remove the top sieve. ORDER OF MIC-1 1. Fill the tank of cooking water to half volume (20 liters) 2. Turn on the power grid (220 V, 50 Hz, Euro connection) 3. Load the separator: Mortgaging bag (preferably dense fabric - linen or jute) The ground voskosyre layers of 3-4 cm is put into a bag. Each subsequent layer is separated from the previous drinazhem (straw, hay, burlap) Filled bag closed and put the top sieve. 4. Packaged separator inserted in the cooking tank 5. Upon reaching 900 ° C temperature (light off) penetration voskosyrya lasts for 30-40 minutes. 6. Set actuator 7. Lever actuator gradually actuated rod which presses on the upper sieve with a force 30 times greater applied to the lever. 8. Spin the wax is held for 20-30 minutes (depending on voskovitosti voskosyrya) with a gradual increase of the force applied on the lever. The greatest force is applied at the end of the process, for 5-10 minutes before it ends. 9. wax boiled drained through the tap. 10. The separator is removed from the digester tank. 11. The rod is released the pressure on the stopper. 12. The separator is disassembled. The process is completed. RECOMMENDATIONS To expedite the process, it is desirable in the cooking pot pour the water with a temperature of more than 90C. When cooking the raw material is compacted, which allows dozagruzit separator. When released from the bag are detected Merwe wax drops, it means that not enough raw wax welded or pressing process took place too quickly. Raw material can be again altered. NOTES TO THE REQUIREMENTS OF SAFETY It is forbidden to connect to the grid without the grounding wire (EURO standard) Do not include current, without filling a cooking pot with water (20 L) After finishing work, disconnect the power cord. The work on the MIC-1 carried out on a flat horizontal plane, ensuring its stability. Do not allow the work of children under 18 years. Before starting work, read the instructions thoroughly. TECHNICAL SPECIFICATIONS 1. Weight - 12 kg 2. Volume - 40 liters 3. Tan - 2 kW