BIG BLUE 20" FILTER RACK; HOUSINGS FOR 2 SETS OF 3 FILTERS IN SERIES Custom manufactured stainless steel filter rack designed to run two sets of 20" x 4.5" Pentek 150236 Big Blue filters in series (filters NOT included). These are heavy duty, large capacity filter housings for high flow, heavy sediment applications. Drain holes on bottom equipped with 2-way PVC ball valves.
You are bidding on a New in the Box, Parker Single Cartridge Stainless Steel Filter Vessel, Model # BSSB10-1SD - Part # 9440-3113. Fulflo Single Cartridge Stainless Steel Filter Vessels Are for Water and Corrosive Fluid Applications
New Pall filter housing stainless steel sanitary housing ECS 3000 GNW 40KM Max pressure: 145 psi (10 bar). Max temperature: 280 deg F (140 deg C). We offer combined shipping where we can.
Filterite 3/4" Brass & Stainless 10" Filter Housing AMO10B-3/4 T910042-000 -125# Unused, surplus filter housing from Filterite / US Filtration and Separations. The housing is cast brass tapped 3/4" and the canister is stainless steel with a brass drain cock as shown. Pressure is rated at 125 psig at 70 degrees F.
All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work, only that we have not tested or checked it out. This may also mean that we are not knowledgeable in this specific item.
NEW ATMOS-TECH INDUSTRIES FILTER, V-BANK ASHRAE FILTER 20" X 25" X 11 1/2" NOS Model# A2025D00-KGKAAAF for HVAC systems needing an ultra low pressure drop supplying air to critical areas. Filter Code Translation: MEDIA GRADE: A= ASHRAE FILTER WIDTH: 20" FILTER LENGTH: 25" FILTER DEPTH: D=11 1/2"
MEMBRALOX Descriptions Used unit, good condition, auction from a company, no retest, sell as is. Please look over in the 3 photos for more detail. MEMBRALOX ALCOA SEPARATIONS FLOW FILTER 0.01 micron 2500 PSI max pressure Local pick up free Used Unit.
Mounting plate is raw steel, NOT PAINTED! NOTE: COIL AND COIL CLAMP NOT INCLUDED, PICTURE IS FOR DEMONSTRATION ONLY. This is an oil filter upgrade for Lincoln Sa-200 welders WITH COILS .
NOTE: COIL AND COIL CLAMP IN PICTURE (FOR DEMONSTRATION ONLY) AND IS NOT INCLUDED, ALL OTHER ITEMS IN FIRST PICTURE ARE! This is an oil filter and fan powered oil cooler upgrade kit for Lincoln Sa-200 welders with F-162 or F-163 WITH COIL OR MAGNETO.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
