pressure manifold for sale, brand-new and used.

Avenger 600 Priced for profit ... Built for Productivity The Avenger 600 is the affordable choice for professional cleaners who need a fully feat

Mi-T-M 3000 PSI @ 2.4 GPM Gasoline Driven Pressure Washer, 7 Hp Kohler Engine, Crank-Driven Pump With Brass Manifold & Thermal Relief Valve, Low Pressure Detergent Injector, Pro Trigger Gun TV #164-725, Wand TV #164-727, 3 Spray Nozzles Included, 1 Each Of 15 Degree Yellow, 25 Degree Green, & Black Detergent Nozzle, Heavy Duty Welded Steel Frame, 10" Pneumatic Tires, 25' Braided Wire Pressure Hose, 1 Year Limited Warranty.

New Mi-T-M 30297 Pressure Washer Replacement Pump Horizontal Shaft 3000 PSI part #: 3-0297. This replacement pump fits most horizontal shaft engines with a 3/4" diameter shaft. The 3-0297 Mi-T-M is a great replacement pump for commercial and consumer use.

This is a used Mi-T-M CW-3004-4MGH. TMCC eBay ID#110D Pump: Belt drive triplex piston General pump with ceramic plungers · Stainless-steel and brass unloader · Forged brass manifold · Thermal relief valve · Water filter with clear sleeve for screen inspection · External bypass system allows more water into system to protect from heat build-up

Pressure Plunger Pump TypeBelt-Drive Flow Capacity (GPM)3 RPM1750 HP Required @ 500 PSI1.0 HP Required @ 1000 PSI2.1 HP Required @ 1500 PSI3.1 HP Required @ 2000 PSI4.1 HP Required @ 2500 PSI5.1 Shaft Dia.

Transit Commission Surplus Lot of 2 manifold O'rings No 07035 for P55W,P56W,P56HT . AS PER:*****Picture is of the actual item on auction*****Satisfaction guaranteed that item is as pictured and described or your money back.Check our 5800+ positives Feedbacks 100% satisfaction and Thanks for your bids.Shipping of this item is via Airmail small parcels no tracking and altough we ship in 24 hours it will take a minimum of 4 up to 10 working days due to Postal services, not us.

Transit Commission Surplus Lot of 2 shim manifold stud No 07207 for P55W,P56W,P56HT ,5100. AS PER:*****Picture is of the actual item on auction*****Satisfaction guaranteed that item is as pictured and described or your money back.Check our 5800+ positives Feedbacks 100% satisfaction and Thanks for your bids.Shipping of this item is via Airmail small parcels no tracking and altough we ship in 24 hours it will take a minimum of 4 up to 10 working days due to Postal services, not us.

DEVILBISS DELTA PRESSURE WASHER PUMP THE IMAGE INDICATES THE STYLE OF MANIFOLD USED ON THESE PUMPS.

DEVILBISS DELTA PRESSURE WASHER PUMP THE IMAGE INDICATES THE STYLES OF MANIFOLD USED ON THESE PUMPS. I AM SELLING THE NEW STYLE ONE WHICH HAS A NEEDLE BEARING CENTER HOLE ( SMALLER CENTER HOLE IN MANIFOLD NO BEARING SEAL VISIBLE) DO NOT PURCHASE THIS ONE IF YOU HAVE A BALL BEARING TYPE WITH THE LARGE CENTER HOLE AND BEARING SEAL SHOWING SINCE THEY MAY NOT BE INTER CHANGEABLE ON YOUR PUMP , I ONLY HAVE THE NEW STYLE LIKE IN THE NEEDLE BEARING IMAGE ON THE LEFT SIDE OF THE IMAGE.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: eight 6mm grade 12.9 Plungers: A special thick solid ceramic for long life, strong durability and more resilience Crankcase: Precison die cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

Triplex Plunger Pump FEATURES Manifold: high strength forged brass for long term use Plungers: special thick solid ceramic for long life, strong durability and more resilience Bolts: Eight 10mm grade 8.8 Crankcase: Precision die cast, large cooling fins and anodized for maximum heat dissipation.

var itemNumber = window.ebayItemID ?

EZ SERIES 44S FEATURES: Solid ceramic plungers Flex coupling and bell housing available for direct drive Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version

RMV2.4G30D-EZ Annovi Reverberi Pressure Washer Pump

RMV2.4G30D-EZ Annovi Reverberi Pressure Washer Pump

CW SERIES 69 FEATURES: the preferred pump frame in the two (2) gun prep conveyor and tunnel car wash industry Forged brass manifold with an exclusive lifetime warranty Large capacity, die cast, anodized aluminum oil bath crankcase Over sized connecting rods for maximum life Heavy duty tapered roller bearing Solid ceramic plungers with continuously lubricated packings Unitized stainless steel inlet and discharge valves Available in

FEATURES: Flanged for direct couple to electric motor (NEMA 184TC) Set Screw for key way Oversized bearings Longer life low and high pressure seals Forged brass manifold with an exclusive lifetime warranty SPECIFICATIONS: 3.8 GPM maximum 2500 PSI maximum 1750 RPM maximum 165F. maximum temperature 18mm plunger

TT SERIES 51, GBF Forged brass manifold with exclusive lifetime warranty Die cast, anodized aluminum oil bath crankcase Solid ceramic plungers continuously lubricated packings The original Interpump unitized, stainless steel, kit 1 inlet and outlet valves Ideal for all general cleaning applications Comes standard with SAE J609 gasoline engine mounting flange Also available in "L" left handed versions SPECIFICATIONS Triplex