+ Post new Ad

Process, Temperature & Pressure Calibrators

The average price for current category was $226.27 last month.

There are 4493 ads in this category.

MICROSCOPE OCULAR EYEPIECE MEOPTA 015X AS IS

Microscope ocular eyepiece meopta 015x as is

  • United States
  • Feb 21st
MICROSCOPE OCULAR EYEPIECE MEOPTA 015X AS IS Sold as is. Thanks.
ROLYN ASPHERIC LENS 18 mm Diameter 15 mm Focal Length LASER OPTICS

Rolyn aspheric lens 18 mm diameter 15 mm focal length laser optics

  • United States
  • Feb 21st
ROLYN ASPHERIC LENS 18 mm Diameter 15 mm Focal Length LASER OPTICS Sold as is. Thanks.
ACHROMAT LENS GLUED IN MIDDLE [TWO LENSES] OPTICS

Achromat lens glued in middle [two lenses] optics

  • United States
  • Feb 21st
ACHROMAT LENS GLUED IN MIDDLE [TWO LENSES] OPTICS Sold as is. Thanks.
Fluke 5101B Calibrator For Parts Opt. 03 05 06

Fluke 5101b calibrator for parts opt. 03 05 06

  • Mount Pleasant, North Carolina, United States
  • Feb 21st
Fluke 5101B Calibrator Fluke 5101B Calibrator **For Parts or Not Working Unit will power up but nothing shows on the display Case does have some damage Options: -03 Wideband Frequency -05 IEEE 488-1975 -06 Bit Serial Asynchronous Interface (RS-232-C) Tracking number will be added as soon as we get it. Thanks for your patience! Item has been described as accurately as possible.
NASSAU MODEL 4060 AUTO LOOP CALIBRATOR WITH CARRYING CASE (Lot 5394)

Nassau model 4060 auto loop calibrator with carrying case (lot 5394)

  • Albertville, Alabama, United States
  • Feb 21st
This listing is for 1 Calibrator. Unit is used, but it does work fine no problems or damage, other than wear from use. Comes as shown, condition is also shown in the pictures.
Fluke Calibration P5515-2700G-1 Hydraulic Calibrator, 70 MPa, 1 gauge

Fluke calibration p5515-2700g-1 hydraulic calibrator, 70 mpa, 1 gauge

  • Melrose, Massachusetts, United States
  • Feb 21st
Fluke Calibration P5515-2700G-1 Hydraulic Calibrator, 70 MPa, 1 gauge New - Factory Authorized Distributor - Factory Warranty Portable Generates pressures to 20,000 psi (1400 bar) Built-in pump for large volume applications and system priming High quality screw press for fine pressure control Acrylic reservoir for visibility of fluid level and quality Fluke Calibration P5515-2700G-1 P5515 Hydraulic Calibrator, 70 MPa (10 000 psi), 1 gauge
Fluke Calibration P5513-2700G-1/C Pneumatic Cali, 20 MPa, 1 gauge Accr

Fluke calibration p5513-2700g-1/c pneumatic cali, 20 mpa, 1 gauge accr

  • Melrose, Massachusetts, United States
  • Feb 21st
Fluke Calibration P5513-2700G-1/C Pneumatic Cali, 20 MPa, 1 gauge Accr New - Factory Authorized Distributor - Factory Warranty High pressure pneumatic operation 0 psi to 3,000 psi (210 bar) Screw press for fine pressure adjustments High quality needle valves for fine control Test port adapters which require no PTFE tape or wrenches Fluke Calibration P5513-2700G-1/C P5513 Pneumatic Calibrator 20 MPa (3000 psi) 1 gauge, Accredited
Desco EMIT ZVM Limit Comparator

Desco emit zvm limit comparator

  • Erie, Pennsylvania, United States
  • Feb 21st
Desco EMIT ZVM Limit Comparator click on image to enlarge
Fluke 5500A/EP Switch Accessory for Calibration of 8840A, 8842A, 34401A, 3478A

Fluke 5500a/ep switch accessory for calibration of 8840a, 8842a, 34401a, 3478a

  • Carlsbad, California, United States
  • Feb 21st
Up for sale I have a Fluke 5500A/EP Switch Accessory for use with the 5500A multifunction calibrator during MetCAL automated calibrations of the Fluke 8840A and 8842A, HP/Agilent 34401A and 3478A and the Keithley 2000 multimeters. It essentially, in conjunction with a 3458A and Fluke MetCAL software, allows you to perform calibrations of the precision multimeters listed without changing connections at all during the calibration procedure.
Clare SafeCheck 8 Power Tool and Electrical Appliance Safety Tester

Clare safecheck 8 power tool and electrical appliance safety tester

  • Albuquerque, New Mexico, United States
  • Feb 21st
Nice Used Electrical Safety Checker **Calibration Due message appears on start up. Contact Seaward for calibration/service. Also note that one of the front leveling feet was missing so I replace the front feet with rubber feet.
USG 0-100 psi Test Gauge never used

Usg 0-100 psi test gauge never used

  • Arcanum, Ohio, United States
  • Feb 21st
Nice unused Test Gauge, 0-100 psi. **approx. shipping weight is 2.8 lbs.
0-100 psi Test Gauge .5 SUBD

0-100 psi test gauge .5 subd

  • Arcanum, Ohio, United States
  • Feb 21st
Nice used Test Gauge, 0-100 psi. **approx. shipping weight is 2.8 lbs.
PCB PIEZOTRONICS 324A01 PIEZOELECTRIC ACCELEROMETER CALIBRATION VIBRATION

Pcb piezotronics 324a01 piezoelectric accelerometer calibration vibration

  • Vincentown, New Jersey, United States
  • Feb 21st
Never used. 5 in stock
HP 5065A and 5061A and 5061B power cord frequency standard rubidium cesium

Hp 5065a and 5061a and 5061b power cord frequency standard rubidium cesium

  • Lompoc, California, United States
  • Feb 21st
This power cord is the larger one for the late models 5065A 5061A and 5061B, very early models used a smaller plug. (I have those available also!)
GERTSCH ST-100 1:4 RATIO TRANSFORMER

Gertsch st-100 1:4 ratio transformer

  • San Antonio, Texas, United States
  • Feb 21st
GERTSCH ST-100 1:4 RATIO TRANSFORMER Working pull Contact if you have any questions. including price
Altek 334A Loop Calibrator

Altek 334a loop calibrator

  • Westminster, South Carolina, United States
  • Feb 21st
This is a used but great working condition.   Thanks for looking.
American Meter Bell Provers 2 CU FT and 5 CU FT

American meter bell provers 2 cu ft and 5 cu ft

  • Wheaton, Illinois, United States
  • Feb 21st
1. Condition: Used in Good Working Condition
Altek 422 14-Type Universal Thermocouple Calibrator With Adapter No Reserve

Altek 422 14-type universal thermocouple calibrator with adapter no reserve

  • Sanford, North Carolina, United States
  • Feb 21st
Gently used meter in great condition what u see is what u get email with any questions thanks
Fluke 725 MultiFunction Process Calibrator, NIB, Never Used

Fluke 725 multifunction process calibrator, nib, never used

  • Weatherford, Texas, United States
  • Feb 21st
New Never used. Ordered by mistake and never returned. The Fluke 725 Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator.
2 lot hg reducer hot air gun nozzle tip NEW

2 lot hg reducer hot air gun nozzle tip new

  • Binghamton, New York, United States
  • Feb 21st
2 3/4 inch long,

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies