psi 18 for sale, brand-new and used.

2 1/2 " Fire Hose/Hydrant Gate Valve Polished Chrome Plated Female NPT x Male NST with Polished Chrome Cap with Chain Used on dry systems as fire hose outlet connections and on pump test manifolds Solid wedge disc with tapered seats Chrome Plated on

2 1/2 " Straight Pattern Brass Gate Valve with non-rising stem and swivel inlet. For use on hydrants, standpipes and fire pumps up to 300 lbs (2070 kPa) applications. Female Swivel NST x Male NST Valve is made up of a Brass body and Brass trim Red speed handle and pin lug swivel on the inlet and male hose thread on the outlet.

2 1/2 " Hose/Hydrant Gate Valve - Female x Male Used on dry systems as fire hose outlet connections and on pump test manifolds Solid wedge disc with tapered seats Cast brass, 300 PSI UL listed and FM approved Gate valve, 2 1/2" Female NST Hose thread inlet x 2 1/2" Male NST hose thread outlet

2 1/2 " Hose Gate Valve - Female x Male Used on dry systems as fire hose outlet connections and on pump test manifolds Solid wedge disc with tapered seats Cast brass, 300 PSI UL listed and FM approved Hose valve, 2 1/2" Female NPT inlet x 2 1/2" Male hose thread outlet

This is a used Pro/apak Portable Foam System. This unit was used as part of an obstacle race and still has a lot of life to give. Included is the fittings necessary to hook it up to a garden hose.

Ice Qube IQ6000VS AC 1PH Air Conditioner 120V 80A Used - Good Condition, Some Nicks and Scratches S/N 1A510111- 3 Volts 120 , Amps 8.0 , Phase 1 , Hz 60 Volts 110 , Amps 8.8 , Phase 1 , Hz 50 Refrigerant 134A 18.0 Ounces Design Pressure Low Side 134 psi High Side 296 psi Please send questions through messages or call 708-717-3868 if you require more help with this item Please look through all the pictures. What you see if what you will receive. Check out my other items!

You're bidding on: - DAYTON UNIT HEATER 5UT20 HYDRONIC STEAM/HOT WATER 36000 BTU - This Dayton Unit Heater was a store display and has never been installed, connected nor used. - This unit has typical cosmetic distractions,

*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) STATES. ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE* ___________________________________________________________________________________________________________ Model: VIRDS6600562 Condition: New Description: Fan - Oscillating - Pedestal - Misting - Commercial Features: 18" Diameter - Direct Drive - 1/4 Hp - 115 Volt -

HEAT EXHANGER MODEL MA-18-2-4B OPERATING PRESSER 300 PSI OPERATING TEMP. 250.F FAN IS A SPAL VA 10-BP50/C-25A. 24 VOLTS INLET AN OUTLET ARE 3/4" PIPE THREAD ON FITTINGS Any questions please email or feel free to call Delaney's Surplus at 608-643-8009 Closed Tuesdays and Wednesdays.

AMERICAN INDUSTRIALHEAT EXCHANGER AB-1002-C6-TP 0707 1 1/2" NPT ON TOP OF THE UNIT 5" APPROXIMATE SHELL DIAMETER 18 1/2" APPROXIMATE LENGTH FROM FLANGE TO FLANGE BRASS SHELL COPPER TUBES 300 PSI SHELL 150 PSI TUBES TEMP.: 300°F

Brand new, never used. Packaged with care using form fitting foam and ready to ship out asap. Local pick up will receive a $50 rebate.

AMERICAN INDUSTRIAL HEAT EXCHANGER MODEL: AB-702-A4-FP 1007 BRASS SHELL 300 PSI COPPER TUBES: 150 PSI TEMP.: 300°F 1" NPT ON TOP INPUTS 3/4" NPT ON INPUTS ON END OF UNIT 4 1/2" APPROXIMATE SHELL DIAMETER 18" FLANGE TO FLANGE FOR MORE INFORMATION ON ITEM PLEASE SEE THE ABOVE PHOTOS.

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

New, never used, new old stock, shows shelf wear, liquid to liquid stainless steel 21 plate heat exchanger, water to water, water to glycol etc;, 150 psi max pressure, 212F max temp., 1" male BSPP (British Pipe Parallel) threaded connections in and out for both circuits.BSPP and BSPT (tapered) thread is used throughout Europe and Asia, and is not generally compatible with US National Pipe Thread .BSPP and BSPT is standard in all European and Asian machines and applications.

HAYDENHEAT EXCHANGER MODEL : HW-218-A4-1 MAX. TEMPERATURE : 350°F OPERATING PRESSURE (SHELL) : 250 PSI OPERATING PRESSURE (TUBES) : 150 PSI SHELL CONNECTING DIA. : 1/2" NPT END BONNET CONNECTION : 1" NPT SHELL DIA.

All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work, only that we have not tested or checked it out. This may also mean that we are not knowledgeable in this specific item.

Manufacturer: Young Touchstone / Young Radiator Part Number: YT-307702 / F-301-HY-4P