pulley bushing for sale, brand-new and used.

4000 RPM Buhler Permanent Magnet 24 V DC Hobby Motor with Large Grooved Pulley New motor manufactured by Buhler Nominal voltage: 24 V DC Voltage range: 4 - 24 VDC No load speed at 24 VDC: 4,000 RPM No load current: 330 mA Starting current: 14.5 A Can be operated in either direction: simply reverse polarity of power supply Shaft dimensions: 14 mm Long x 6 mm Diameter Comes with a shaft mounted pulley: 9 mm Long x 25 mm Diameter Aluminum pulley features 4 grooves Dimensions (not in

Up for auction I have 2 Browning Sheave Pulleys. The first is a 2Bk45 Pulley 2 groove, the second Is a smaller single groove pulley, however I cannot make out the part number. It appears to be A617 or 4617.

Martin Sprocket & Gear 18H200, Bushing Bore Timing Belt Pulley, For Belt: (H), Belt Width: (2"), 18 Teeth, Cast Iron Mfr Part #: 18H200 Mfr Description: 18H200 RSB TIMING PULLEY

This is a Browning 2BK60H double groove pulley. It comes with a type H bushing with a 3/4" bore. The outside diameter is 5 3/4".

New in box Woods HTD timing pulley 48 tooth H pitch SK bushing

the pulley out side diameter is 51/2 X 11/2 bore X 13/8 shaft size both parts are in good condition and made in u s a , grainger comparison # are pulley 5uhn9 and bushing # 5uhz8 again both are used / clean and painted thanks any questions glad to answer

For sale is a new unknown manufacturer 64 tooth Timing Pulley with a part number P6414M55F that is 11 5/8" in Diameter, 2 3/4" Thick with a 4 1/4" Diameter Bore. It weighs 55 lbs.

This is a new, old stock, cast iron V-Belt pulley. It measures 5.75 inches in diameter and the max belt width is 5/8. It has a tapered split bushing with it and the bore is 1 inch with a 1/4" wide key slot.

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.

This is an old style clutch pulley, with a rounded center block, made of cast iron with a new oilite bushing. Am's old part # for the pulley was 120-290. Weights part # is 14-231-50.

Welcome to our mailorder division of Jim Goodall Equipment Sales, Ft Myers, Fl USA, We sell over $2M per year on Ebay and have an Excellent Rating for customer service, 39 Years in the Equipment Industry, former Chain Saw Dealer for over 20 Years and Former Sr Sales Manager for Husqvarna Corp CMI CONTINUOUS SIDEPLATE MICRO PULLEY Continuous sideplate allows multiple rigging options--parallel to the rope with a single oval carabiner or perpendicular through the rigging holes.

Welcome to our mailorder division of Jim Goodall Equipment Sales, Ft Myers, Fl USA, We sell over $2M per year on Ebay and have an Excellent Rating for customer service, 39 Years in the Equipment Industry, former Chain Saw Dealer for over 20 Years and Former Sr Sales Manager for Husqvarna Corp CMI CONTINUOUS SIDEPLATE MICRO PULLEY Continuous sideplate allows multiple rigging options--parallel to the rope with a single oval carabiner or perpendicular through the rigging holes.

1 - 16" Diameter, 1" or 3/4" bore cast pulley. 3/4" bore has a reducing bushing in it that reduces the bore size from a 1" to a 3/4". Perfect Pulley for 3L, 4L or A style belts.

Up for sale is the factory clutch pulley for the IHC LA and LB engines. Fits both the 1 1/2- 2 1/2hp and 3-5hp engines. 10" in diameter.

This pulley fits an International Harvester Company Model M or Mogul gas engine (I think). The casting no. is 943T and has IHC logo.

This is new, never used belt pulley. It was painted on the machine to black, but removed and never put into service. This is an 8 groove pulley for 5V Type Belts and a Type E-QD Bushing.

STEELPulley / SheaveReducer Sleeveto reduce a 1" Bore Pulley, gear, sprocket, wheels,etc.to fit a Motor witha 3/4" Shaftwith a 3/16" Keyway slot DescriptionThis Pully Reducer Sle