pulley bushing for sale, brand-new and used.

Other than chipped paint the pulley and bushing are in very good condition. 9 inch od with a 1 3/8 id SK bushing. If I receive your payment by 3 PM PST I will ship the same day via 1 to 4 Day Priority Mail.

Pulley / Sheave Reducer Sleeve to reduce a 3/4" Bore Pulley, gear, sprocket, wheels,etc. to fit a Motor with a 15mm Shaft with a 3/16" Keyway slot

Shaft Adapter Pulley / Sheave Bore Reducer Sleeve to reduce a 5/16 Bore Pulley, gear, sprocket, wheels,etc. to fit a Motor with a 1/4" Shaft

1-013-TL SPB224X3.2517 Ametric® Part Number 991160 SKU No. BSW Taper Bushed V-Pulley 224 mm Outside Diameter (O) 3 Groove SPB/17 Dynamically Balanced Cast Iron V-Belt Pulley / Sheave For 2517 Taper Lock Bushing 4 Type Construction 15 mm Web/Spoke Thickness(E) 63 mm Face Width(F) 181 mm Inside Diameter(J) 0 mm Hub Offset(K) 45 mm Bushing Thru Length(L) 18 mm Hub Offset(M) 117 mm Hub Diameter(N) Price listed is for one V Pulley, with a Taper lock bore -- but without bushing or setscrews.

1-013-TL SPA560X2.3020 Ametric® Part Number 436869 SKU No. Taper Bushed V-Pulley 560 mm Outside Diameter (O) 2 Groove SPA/13 Dynamically Balanced Cast Iron V-Belt Pulley / Sheave For 3020 Taper Lock Bushing 4 Type Construction 0 mm Web/Spoke Thickness(E) 35 mm Face Width(F) 526 mm Inside Diameter(J) 0 mm Hub Offset(K) 45 mm Bushing Thru Length(L) 10 mm Hub Offset(M) 124 mm Hub Diameter(N) Price listed is for one V Pulley, with a Taper lock bore -- but without bushing or setscrews.

1-013-TL SPA132X4.2517 Ametric® Part Number 483847 SKU No. BSW Taper Bushed V-Pulley 132 mm Outside Diameter (O) 4 Groove SPA/13 Dynamically Balanced Cast Iron V-Belt Pulley / Sheave For 2517 Taper Lock Bushing 2 Type Construction 0 mm Web/Spoke Thickness(E) 65 mm Face Width(F) 98 mm Inside Diameter(J) 0 mm Hub Offset(K) 45 mm Bushing Thru Length(L) 20 mm Hub Offset(M) 0 mm Hub Diameter(N) Price listed is for one V Pulley, with a Taper lock bore -- but without bushing or setscrews.

This Martin 1610 taper bushing is made of sintered steel and is used for mounting a taper bushed pulley, sheave, or sprocket on a drive shaft. It is flush mounted for reduced mounting width and has a split taper for a tight clamp to shafts. The bushing is made of sintered powder steel for greater strength and wear resistance than plain carbon steel.

This bushing is new in the box, has the bolts to secure bushing to pulley. Bushing has a Key way to secure to shaft. Posted with eBay Mobile

This is a NEW IN THE BOX timing pulley. Woods drive, model P40 - 8M - 85 SD. Teeth: 40.