push puller for sale, brand-new and used.

Product Name 17-1/2 Ton Capacity Push Puller Features and Benefits: It can be used with several different attachments depending on the job Has 9-1/2" legs Maximum reach 11-1/2" with a spread of 3-1/8"-11-3/4" Screw size 1"-14 x 13-1/4" Weight 20 lbs. This push-puller gives you what you want and the tonnage capacity you need to tackle parts removal and installation on many models of cars, trucks, tractors and more.

Thank you for visiting our store. Please read everything before making purchase. E-mail us with questions.

Don't know name of tool but its works by sliding the Aluminum Spring Loaded Collar back and it releases the attachment on end. The attachment you see pictured is a female cable TV end and this is used to install ends on new wires or use it as a cable wire feeder/puller. Its definatley older but still functions perfectly.

NOTE: COIL AND COIL CLAMP IN PICTURE (FOR DEMONSTRATION ONLY) AND IS NOT INCLUDED, ALL OTHER ITEMS IN FIRST PICTURE ARE! This is an oil filter and fan powered oil cooler upgrade kit for Lincoln Sa-200 welders with F-162 or F-163 WITH COIL OR MAGNETO.

You are bidding on a pair of OTC 18” push-puller legs, current part number 1110. These legs are marked 939-B1 which is the old part number. Also included are the hex nuts, leg washers, slide plates and leg caps to attach the legs to an OTC #1070 puller block.

The JackJaw®201 easily pulls wide flat stakes used in concrete applications. This taller model (29” tall) allows you to pull stakes without bending over. JackJaw® stake extractors pull stakes straight up out of the ground without bending them or breaking the fresh concrete, even when the stake is flush with the top of the form.

This industrial puller was my dad's. He has passed away, so we are selling some of his stuff to help my mom out. I would think it would work fine but have no way of testing with hydraulic pressure.

This combination set includes our two most popular bearing “splitters inch (2 inch and 3 inch), four sets of hex push puller legs, and a 5 inch bar-type puller head with f

Product Name 1/2" to 9" Bearing Splitter Features and Benefits: Minimum spread of 1/2" and maximum spread of 9" Use with puller Nos. 1035, 1040, 1041, 1042, 1065,1063 and 938 Weight is only 12 lbs. 9 oz.

Product Name 1/4" to 15/16" Bearing Splitter Features and Benefits: Minimum spread of 1/4" to a maximum of 15/16" Use with pullers 1020, 1022, and 1023 Weight: 12 oz. 15/16" - 18 thread of tapped hole in adapter 1-11/16" distance between adjusting screws These versatile accessories feature "knife-like" edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited.

Product Name 10 Ton Push Puller Features and Benefits: 10 ton of pulling power Has a reach of 8 3/8", puller legs are 6 3/4" long, with a spread of 7 1/4" Removes and installs press-fit parts Can be used with several different attachments listed This tool can be used with several attachments, a bearing, or pulley puller attachment. Can be used with OTC 1123 bearing puller attachment, 679 pulley pulling attachment, 1150, 1151, 1152, 1153 internal pulling attachments.

Product Name 30 Ton Push Puller Features and Benefits: Removes and installs press-fit parts Can be used with Nos. 1126 and 1127 bearing pulling attachments or No. 680 pulley pulling attachment (two 8012 adapters are required to connect 680 to puller) Can be used with No.

KASTAR PUSH/PULL HARNESS CONNECTOR RELEASE TOOL SET 4647 USA MADE Offered by Rock Bottom Pricing, Inc.