+ Post new Ad
Quick Change mandrel for Drill Chuck w/ 1/4" Collet machinist aircraft tool, US $19.90 – Picture 0
Quick Change mandrel for Drill Chuck w/ 1/4" Collet machinist aircraft tool, US $19.90 – Picture 1
Quick Change mandrel for Drill Chuck w/ 1/4" Collet machinist aircraft tool, US $19.90 – Picture 2
Quick Change mandrel for Drill Chuck w/ 1/4" Collet machinist aircraft tool, US $19.90 – Picture 3
Quick Change mandrel for Drill Chuck w/ 1/4" Collet machinist aircraft tool, US $19.90 – Picture 0
Quick Change mandrel for Drill Chuck w/ 1/4" Collet machinist aircraft tool, US $19.90 – Picture 1
Quick Change mandrel for Drill Chuck w/ 1/4" Collet machinist aircraft tool, US $19.90 – Picture 2
Quick Change mandrel for Drill Chuck w/ 1/4" Collet machinist aircraft tool, US $19.90 – Picture 3

Quick Change Mandrel For Drill Chuck W/ 1/4" Collet Machinist Aircraft Tool

US $19.90

  • San Antonio, Texas, United States
  • Jan 30th
Open on mobile:
QR code
With this Quick Change Mandrel set, you can revitalize your drilling and aircraft tool capabilities. These mandrels are designed to fit seamlessly with any Quick Change Drill Chuck that has a .303" - .306" diameter opening. Make sure you equip yourself with the best tools for the job by investing in these high-quality mandrels. Each set may vary slightly in color, but you can trust that each mandrel has been thoroughly inspected to ensure its quality. Enhance your machining and aircraft tool collection with this MACHINIST/AEROSPACE TOOL lot that includes two Quick Change Mandrels with 1/4" Collet. The 1/4" collet included can securely hold any 1/4" tooling, making it a versatile addition to your arsenal. It's important to note that while this item is used, it remains in good usable condition.

Directions

Similar products from Fast Change Tools

PHASE II 250-104 Tool Post Holder Series: AXA Tool Post Holder Number: 4

PHASE II 250-104 Tool Post Holder Series: AXA Tool Post Holder Number: 4

  • Saint Peters, Missouri, United States
  • Jan 30th
Aloris CX Tool Post, needs a little attention

Aloris CX Tool Post, needs a little attention

  • Rocky Point, New York, United States
  • Jan 30th
5ps BXA tool holder Organizers, custom made racks for Aloris Shars white-baige

5ps BXA tool holder Organizers, custom made racks for Aloris Shars white-baige

  • Staten Island, New York, United States
  • Jan 30th
30 Taper 300 Series Universal Engineering Kwik Switch Jacobs Drill Chuck No. 18N

30 Taper 300 Series Universal Engineering Kwik Switch Jacobs Drill Chuck No. 18N

  • Cary, Illinois, United States
  • Jan 30th
30 Taper 300 Series Universal Engineering Kwik Switch Collet Chuck Set of 4

30 Taper 300 Series Universal Engineering Kwik Switch Collet Chuck Set of 4

  • Cary, Illinois, United States
  • Jan 30th
Set of 3 Morse Taper Adapters 5-4, 4-3, and 3-2

Set of 3 Morse Taper Adapters 5-4, 4-3, and 3-2

  • Cary, Illinois, United States
  • Jan 30th
30 Taper 300 Series Universal Engineering Kwik Switch End Mill Holders Set of 5

30 Taper 300 Series Universal Engineering Kwik Switch End Mill Holders Set of 5

  • Cary, Illinois, United States
  • Jan 30th
An Aloris AX 1 Quick Change Tool Holder

An Aloris AX 1 Quick Change Tool Holder

  • Norwood, New Jersey, United States
  • Jan 30th
Aloris CX Quick Change Tool Post

Aloris CX Quick Change Tool Post

  • Norwood, New Jersey, United States
  • Jan 30th
Index VDI 20 CNC Machine Tool Holders. Set Of 8.

Index VDI 20 CNC Machine Tool Holders. Set Of 8.

  • Hubbard, Ohio, United States
  • Jan 30th
A2Z CNC Quick Change Toolholder - 1/4"-1/2" - QCTH1

A2Z CNC Quick Change Toolholder - 1/4"-1/2" - QCTH1

  • Avon, Indiana, United States
  • Jan 30th
Aloris BXA turning and facing holder,metal lathe

Aloris BXA turning and facing holder,metal lathe

  • Bennington, New Hampshire, United States
  • Jan 30th
BXA #5 MT2 Series 200 Morse Taper Tool Post Holder 250-205 %45C% FRA

BXA #5 MT2 Series 200 Morse Taper Tool Post Holder 250-205 %45C% FRA

  • Hope, Arkansas, United States
  • Jan 30th
Big Kaiser Innotool ESM-138 KPT UniLock Zero Point Press Die set clamping Tool

Big Kaiser Innotool ESM-138 KPT UniLock Zero Point Press Die set clamping Tool

  • Grand Rapids, Michigan, United States
  • Jan 30th
Aloris CXA12 tool holder for aloris cxa tool post

Aloris CXA12 tool holder for aloris cxa tool post

  • Bennington, New Hampshire, United States
  • Jan 30th
Aloris Modified Boring, Turning, and Facing Holder EA2 (Inv.32035)

Aloris Modified Boring, Turning, and Facing Holder EA2 (Inv.32035)

  • Portland, Connecticut, United States
  • Jan 30th
Aloris Boring, Turning, and Facing Holder CA2 (Inv.32036)

Aloris Boring, Turning, and Facing Holder CA2 (Inv.32036)

  • Portland, Connecticut, United States
  • Jan 30th
Aloris Boring, Turning, and Facing Holder CA1 (Inv.32039)

Aloris Boring, Turning, and Facing Holder CA1 (Inv.32039)

  • Portland, Connecticut, United States
  • Jan 30th
Dorian Tool D50DA-2 boring, turning, and facing holder (Inv.32048)

Dorian Tool D50DA-2 boring, turning, and facing holder (Inv.32048)

  • Portland, Connecticut, United States
  • Jan 30th
Aloris multiple tool holder DA-6 (Inv.32049)

Aloris multiple tool holder DA-6 (Inv.32049)

  • Portland, Connecticut, United States
  • Jan 30th

People who viewed this item also vieved

UNIVERSAL ENG CAT50 ACURA FLEX 1" SERIES COLLET CHUCK W/ (5) COLLETS LOT C11529

UNIVERSAL ENG CAT50 ACURA FLEX 1" SERIES COLLET CHUCK W/ (5) COLLETS LOT C11529

  • Dayton, Ohio, United States
  • Mar 10th
C4-390B.58-50 070 MAS-BT 403 to COromant Capto Adaptor

C4-390B.58-50 070 MAS-BT 403 to COromant Capto Adaptor

  • Fruitport, Michigan, United States
  • Mar 10th
1" COOLANT FED BORING BAR CLAMP & LOCK PIN SYSTEM M 95 DEGREE 12" LENGTH CNMG332

1" COOLANT FED BORING BAR CLAMP & LOCK PIN SYSTEM M 95 DEGREE 12" LENGTH CNMG332

  • West Chicago, Illinois, United States
  • Mar 26th
NICE! DEVLIEG NMTB 50 SHANK MICROBORE BORING BAR 50M 59

NICE! DEVLIEG NMTB 50 SHANK MICROBORE BORING BAR 50M 59

  • Chino, California, United States
  • Mar 26th
#Y T-A 13/32" AMEC S. COBALT Allied Spade Drill Inserts (2pcs) New&Original

#Y T-A 13/32" AMEC S. COBALT Allied Spade Drill Inserts (2pcs) New&Original

  • Waterford, Michigan, United States
  • Apr 26th
Kennametal KGMSR-1650N NK5 Modular Groove Toolholder *Used*

Kennametal KGMSR-1650N NK5 Modular Groove Toolholder *Used*

  • Waterloo, Wisconsin, United States
  • Apr 27th
Internal Workholding Adapter 5C JK-698 USA [2059]

Internal Workholding Adapter 5C JK-698 USA [2059]

  • Saint Louis, Missouri, United States
  • May 18th
NEW BILZ SIZE #3 ADAPTER COLLET FOR M27 TAP

NEW BILZ SIZE #3 ADAPTER COLLET FOR M27 TAP

  • Cleveland, Ohio, United States
  • May 19th
Bushing Sleeves Assorted Lot 7/64" to 1" Reamers Twist Drills Small Sizes

Bushing Sleeves Assorted Lot 7/64" to 1" Reamers Twist Drills Small Sizes

  • Jamestown, New York, United States
  • Jun 2nd
Hardinge HDB 5 Bushings 7 pcs.

Hardinge HDB 5 Bushings 7 pcs.

  • Waterbury, Connecticut, United States
  • Jun 3rd
NMTB 50 WELDON 3/8 END MILL TOLL HOLDER LOC2278

NMTB 50 WELDON 3/8 END MILL TOLL HOLDER LOC2278

  • Sidney, Ohio, United States
  • May 25th
NMTB 50 PUTNAM 7/8 END MILL TOLL HOLDER LOC2277

NMTB 50 PUTNAM 7/8 END MILL TOLL HOLDER LOC2277

  • Sidney, Ohio, United States
  • May 25th
SECO S-119721 324 ADAPTER STOCK shank tools Shrink Chuck

SECO S-119721 324 ADAPTER STOCK shank tools Shrink Chuck

  • Walled Lake, Michigan, United States
  • May 28th
Kennedy Machinist Roller Cabinet 275B Made In USA Tool Cart 5 Drawer Brown

Kennedy Machinist Roller Cabinet 275B Made In USA Tool Cart 5 Drawer Brown

  • Saint Charles, Illinois, United States
  • May 28th
Jacobs Chuck Key 1/2 " 1/4 " Pilot

Jacobs Chuck Key 1/2 " 1/4 " Pilot

  • Stockton, California, United States
  • Jun 5th
Jacobs Chuck Number 8 1/2 Cap 1/4" 2S Taper Heavy Duty Ball Bearing Made in USA

Jacobs Chuck Number 8 1/2 Cap 1/4" 2S Taper Heavy Duty Ball Bearing Made in USA

  • Radford, Virginia, United States
  • Jun 5th
SUNNEN HONE MANDREL K4-125CH STK 5281

SUNNEN HONE MANDREL K4-125CH STK 5281

  • Wadley, Alabama, United States
  • Jun 9th
Tobin Arp Line Boring Bar setting gage

Tobin Arp Line Boring Bar setting gage

  • Cave Creek, Arizona, United States
  • Jun 9th
Rego-Fix ER20 Holder Floating Adjustable

Rego-Fix ER20 Holder Floating Adjustable

  • Cicero, Illinois, United States
  • Oct 23rd
80mm Spindle Motor Mount Bracket Clamp for CNC Engraving Machine

80mm Spindle Motor Mount Bracket Clamp for CNC Engraving Machine

  • Shanghai, China
  • Oct 23rd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies