3 self tapping screws for sale, brand-new and used.

Autoparts Wholesalers - Official eBay Store

NO RESERVE ON THIS LOT You are bidding on 32 boxes of Woodgrip drill screws 12 X 3/4" Metal to Wood Screws. Each box contains 6 bags of 500 for a total of 3000 screws per box. Control Seal EPDM rubber captured under the stamped “dome” Available on all Woodgrip drill screws Reinforced domed shoulder distributes clamp load EPDM washer compressed in three key areas: against the panel, metal wa

Nearly full box of Hilti self tapping 3/4 inch hex head screws. Weighed the box to determine approximately 6000 screws out of 6500 original qty.

100) Sur-Pro, Eye Lag, Self Tapping, Eyelet. 1/4" x 2", 3/4" thread length. These Eyelet Lag screws are used with the installation of support wire for Acoustical & Suspended Ceiling Tiles plus numerous other applications.

This listing is for 2 pounds 11 ounces (or 200 screws) 10X2.5” stainless steel wood screws. These can save a lot of time and money because these are self tapping and require no pre-drilling. These are listed as new other only because they are in bulk, they have never been used.

Excellent value self tapping stainless steel 3/4" screws, lot of 100 brand new outdoor window framing screws. made to weather the weather, very nice!

250-SFS Intec Woodgrip XG "Control Seal" 1 1/2" (HWH) Hex Washer Head Self Tapping Blue Screws.... PRODUCT: #12-8 x 1-1/2 in. actual size is shown in photo.

Whole box of the self tapping screw for the metal door side of cal-royal hinges. No specs or quantity given, but the overall length is around 1/2 in with the grip length around 7/16. Diameter is about 3/16, not sure of thread size.

Fastmount PC-F1 Female, Standard Clip. Self Tapping Female Socket. 100 pieces Part No.

Fastmount PC-M2H, Standard Clip. Heavy Duty Self Tapping Male. 100 pieces Part No.

Fastmount PC-M2H, Standard Clip. Heavy Duty Self Tapping Male. 2000 pieces Part No.

Fastmount PC-F1 Female, Standard Clip. Self Tapping Female Socket. 2,000 pieces Part No.

DUMORE SERIES 28 DRILL-N-TAP DRILL HEAD Includes the Drill Head and column Tested and working As Pictured Please contact me for shipping Dumore Series 28 automatic feed drills and tappers, or self feed drills and tapping units, are cabable of both drilling and tapping. The motor automatically reverses for withdrawal after tapping. No mechanical parts – gears, clutches or lead screws – are required, eliminating the major cause of problems in ordinary tapping machines.

I-Lag Self Drilling Sheet Metal Screws Suspended Ceilings #175-SD 30 pounds This is a 30 pound box of new I-lag self tapping sheet metal screws for suspended ceilings. Box has part number listed as 175SD, also has ICC ESR-3135. It also has a lable stating that these are 3" long, actual measurement is 3 3/16", the part that is not threaded is 1 1/4 inches, the hole for the wire is 3/16".

ORTHOPEDIC SYSTEM/KIT INSTRUMENTS /SCREWS/PLATES 2.7/3.5/4.0 fast shipping This system has all instruments and implants size 2.7/3.5/4.0mm The quality is Excellent, all implants are FDA approved . If want different number of screws and plates please make an note when you buy it. Also if you want to choose the sizes of plates and screws please make a note, which sizes you want.(For 2.7 ,mm screws we have :6-40mm, for 3.5mm screws-10-50mm.