retaining spring for sale, brand-new and used.

Klein Tools Retaining Ring Pliers - Internal Type with 45 Degree Tip - New! #73238 *Deluxe style with spring-loaded action*Has .038" (1mm) 45 degree tip*Fits housing with

(1) - NEW CTS THOMPSON #1010 HARDENED CARBON STAINLESS HANDCUFF WITH POSITIVE CLICKBAK LOADING SYSTEM. ORANGE GARCOTE PLATED. * NIJ CERTIFIED &n

(1) - NEW CTS THOMPSON #1010 HARDENED CARBON STAINLESS HANDCUFF WITH POSITIVE CLICKBAK LOADING SYSTEM. RED GARCOTE PLATED. * NIJ CERTIFIED &

(1) - NEW CTS THOMPSON #1010 HARDENED CARBON STAINLESS HANDCUFF WITH POSITIVE CLICKBAK LOADING SYSTEM. PINK GARCOTE PLATED. * NIJ CERTIFIED &nbs

Pad Driver Plate Bearing Retaining Ring with Screws FOR CLARKE OBS-18 and OBS-18 DC Part # 66981A Includes the retaining ring and three screws as pictured. A 5/32 allen wrench is required for installation.

(GS) GREENLEE 438-5 STEEL FISHTAPE FISH TAPE 50 FT X 1/8 IN -- GREAT CO

THIS SALE IS FOR A BRAND NEW FACTORY FRESH, FACTORY SEALED NEVER OPENED, NEVER USED GENUINE KLEIN TOOLS, KATAPULT WIRE STRIPER/CUTTER, 8-22 AWG GAUGE WIRE, 8-20 AWG SOLID WIRE & 10-22 AWG STRANDED WIRE. MODEL NUMBER=11063W. This item qualifies for eBay Fast N Free - 1 day handling and free domestic shipping with Fedex Ground - Home to the lower 48 USA.

Klein Tools Katapult 11063 The Klein Tools 11063 8-22 AWG Katapult Wire Stripper cuts and strips 8-22 AWG wire with ease. Remove up to 1" in length of the insulation layer (jacket layer) in a single step. The tension loaded wire-grip gently holds the cable in place while retaining the cable geometry.

It has a couple scrapes on one side other than that it looks new. Cuts and strips 8-22 AWG wire. with ease.

YOU ARE BIDDING ON A Prochem Locking Pin, Spring, & Retaining Ring for a Prochem Hose Reel (ACTUAL ITEMS IN PICTURE). THIS AUCTION INC

1/8" Stainless Steel Quick Disconnects QD carpet cleaning truck mount coupler 1 Set 1/8" Stainless Steel High Pressure Female / Male Quick Disconnects 1 Male QD and 1 Female QD per set 1/8" (these are smaller than the standard 1/4" QDs found on wands) Stainless steel construction: body, poppet, spring and retaining balls Double Viton O-rings 5000 psi Max Operating Temp 400° F

3/8" Quick Disconnect Set

3/8" Quick Disconnect- 2 Sets

You are bidding on 5 Bobrick Lavatory-Mounted Soap Dispensers Model B-822. Stainless Steel bright polished finish on Piston Spout & Escutcheon. Soap Container Capacity:34-fl oz.

1 -- LOCKWELL® Quick Release Pin ..... 7"...# 62060 These precision-made single-acting pins provide quick, easy, positive engagement for applications requiring frequent, repetitive use. Detent balls at end of pin fit snugly against mating surface for vibration-resistant performance.

THIS LOT CONTAINS 25 FLAT STOCK RETAINER RING CLIPS. THE RING CLIPS ARE MADE FROM 301 SPRING TEMPER STAINLESS STEEL, THE INSIDE DIAMETER MEASURES .370 +/- .010 AND HAS A WIDTH OF .120. THERE ARE MANY OF THESE AVAILABLE.

Asco Red-Hat Solenoid Valve Rebuild Kit Model # 302020. !!!!! New Old Stock !!!!!

The Magnehelic is used to measure fan and blower pressures, filter resistance, air velosity, furnace draft, pressure drop accross orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems.