+ Post new Ad
ridgid BC-410 chain pipe vise 1/8" to 4" diameter with OOAK tristand, US $350 – Picture 0
ridgid BC-410 chain pipe vise 1/8" to 4" diameter with OOAK tristand, US $350 – Picture 0

Ridgid Bc-410 Chain Pipe Vise 1/8" To 4" Diameter With Ooak Tristand

US $350

  • Monmouth, Oregon, United States
  • Jun 9th
Open on mobile:
QR code
If you only want the vise and not the stand, it can ship via the Priority mail flat rate large box option, DO NOT purchase this and opt for the priority flat rate box option and expect the entire unit to ship that way. It will ship via the parcel select option that is listed first under the shipping. Thank you. If you opt for the whole unit, it will be shipping in multiple parcels, the legs in one, the table and vise in the other. Total weight is approx 48lbs before packaging.

Directions

Similar products from Grips & Tongs

3inch Machinists Tilting Angle Vise

3inch Machinists Tilting Angle Vise

  • Massapequa, New York, United States
  • Jun 9th
Ridgid No. 21 Pipe Vise

Ridgid No. 21 Pipe Vise

  • Boaz, Alabama, United States
  • Jun 9th
RIDGID BC410 CHAIN PIPE VICE 1/8" TO 4" INCH PIPE

RIDGID BC410 CHAIN PIPE VICE 1/8" TO 4" INCH PIPE

  • Hamilton, Montana, United States
  • Jun 9th
Ridgid Jaw, Vise BC410

Ridgid Jaw, Vise BC410

  • Hamilton, Montana, United States
  • Jun 9th
CARDINAL, 4B, 4",DRILL PRESS, SPEED-VISE, JAW PLATES. , NEW, VISE,MILL,JAWS

CARDINAL, 4B, 4",DRILL PRESS, SPEED-VISE, JAW PLATES. , NEW, VISE,MILL,JAWS

  • Campbell, California, United States
  • Jun 9th
Mill Vise Jaw

Mill Vise Jaw

  • Gainesville, Georgia, United States
  • Jun 9th
HAND VISE STEEL HAND HELD CLAMP HANDLE UNIVERAL WORK HOLDER STEEL GERMANY

HAND VISE STEEL HAND HELD CLAMP HANDLE UNIVERAL WORK HOLDER STEEL GERMANY

  • Madison, Virginia, United States
  • Jun 9th
CRAFTSMAN USA - BENCH/TABLE VISE ANVIL VINTAGE RED 506-51800 - READY TO SHIP

CRAFTSMAN USA - BENCH/TABLE VISE ANVIL VINTAGE RED 506-51800 - READY TO SHIP

  • Portland, Oregon, United States
  • Jun 9th
Wilton 1750 Machinist Bench Vise 5" 5 1/2" open Jaws 42 lb Bullet Made in U.S.A.

Wilton 1750 Machinist Bench Vise 5" 5 1/2" open Jaws 42 lb Bullet Made in U.S.A.

  • Lupton, Michigan, United States
  • Jun 9th
Kurt "6" vice

Kurt "6" vice

  • Tulsa, Oklahoma, United States
  • Jun 9th
Kurt Anglock Style 6" Milling Machine Vise

Kurt Anglock Style 6" Milling Machine Vise

  • Berrien Springs, Michigan, United States
  • Jun 9th
SCREWYBALL BOX SET Multiaxis Work Holding Device For The Kurt Milling Vise

SCREWYBALL BOX SET Multiaxis Work Holding Device For The Kurt Milling Vise

  • Mountain View, California, United States
  • Jun 9th
Columbian woodworkers vise 7" x 7" Model 5 CD

Columbian woodworkers vise 7" x 7" Model 5 CD

  • Bowerston, Ohio, United States
  • Jun 9th
NICE WILTON 2 1/2" NO.25 VISE

NICE WILTON 2 1/2" NO.25 VISE

  • El Monte, California, United States
  • Jun 9th
RECORD #1 VISE VICE SHEFFIELD ENGLAND

RECORD #1 VISE VICE SHEFFIELD ENGLAND

  • Hamilton, Ontario, Canada
  • Jun 9th
Vintage Wilton Shop King Combination Swivel Bench Vise 4" Jaws Machinist Anvil

Vintage Wilton Shop King Combination Swivel Bench Vise 4" Jaws Machinist Anvil

  • Plano, Texas, United States
  • Jun 9th
BRIDGEPORT HEAVY DUTY 6" MILLING MACHINE VISE w/ HANDLE

BRIDGEPORT HEAVY DUTY 6" MILLING MACHINE VISE w/ HANDLE

  • Covina, California, United States
  • Jun 9th
Restored Columbian 804 4" All Steel Pat. Pending Vise

Restored Columbian 804 4" All Steel Pat. Pending Vise

  • Helena, Missouri, United States
  • Jun 9th
Panavise Wide Opening Head Panavise 396 NIB, 308 WEIGHTED BASE

Panavise Wide Opening Head Panavise 396 NIB, 308 WEIGHTED BASE

  • Carignan, Quebec, Canada
  • Jun 9th
Palmgren 3" Cross Slide Vise

Palmgren 3" Cross Slide Vise

  • Martinsville, Ohio, United States
  • Jun 9th

People who viewed this item also vieved

MATCHED PAIR OF STARRETT V BLOCKS WITH CLAMPS, MODEL NO. 568

MATCHED PAIR OF STARRETT V BLOCKS WITH CLAMPS, MODEL NO. 568

  • North Springfield, Vermont, United States
  • Jan 30th
MODERN MOLD & TOOL V BLOCK AND CLAMP SET, PRECISION GROUND

MODERN MOLD & TOOL V BLOCK AND CLAMP SET, PRECISION GROUND

  • North Springfield, Vermont, United States
  • Jan 30th
SPi 98-446-8 10 Matched Pair 1/8" x 1/2" to 1-5/8" x 6" Thin Parallel Set 2J

SPi 98-446-8 10 Matched Pair 1/8" x 1/2" to 1-5/8" x 6" Thin Parallel Set 2J

  • Saint Louis, Missouri, United States
  • Jan 30th
CENTER ADAPTERS FOR SPINDLES OF LARGE LATHES AM/STD TAPERS

CENTER ADAPTERS FOR SPINDLES OF LARGE LATHES AM/STD TAPERS

  • Plantsville, Connecticut, United States
  • Jan 30th
Sherline 1191 Live Center

Sherline 1191 Live Center

  • United States
  • Jan 30th
NEW MORSE TAPER MT 5 LATHE LIVE BULL NOSE PIPE CENTER

NEW MORSE TAPER MT 5 LATHE LIVE BULL NOSE PIPE CENTER

  • Harvard, Massachusetts, United States
  • Jan 30th
10" B210 CNC Lathe Chuck Jaw 3 T NUTS Kitagawa Sam Chully Strong

10" B210 CNC Lathe Chuck Jaw 3 T NUTS Kitagawa Sam Chully Strong

  • Columbus, Ohio, United States
  • Jan 30th
8” STEEL SOFT JAWS (100mm HT)1.5MM X 60° SERRATED FOR B-208 TYPE LATHE CHUCKS

8” STEEL SOFT JAWS (100mm HT)1.5MM X 60° SERRATED FOR B-208 TYPE LATHE CHUCKS

  • Chino, California, United States
  • Jan 30th
SHARS MT3 Morse Taper 3 3MT ER 40 ER40 Collet Chuck Tool Holder 0.0001" MT 3

SHARS MT3 Morse Taper 3 3MT ER 40 ER40 Collet Chuck Tool Holder 0.0001" MT 3

  • Saint Charles, Illinois, United States
  • Jan 30th
DE STA CO 8JG-067-2-01 Clamping Arm, Type U-Central, New Bulk Lot of 3

DE STA CO 8JG-067-2-01 Clamping Arm, Type U-Central, New Bulk Lot of 3

  • St Jacobs, Ontario, Canada
  • Jan 30th
SMC ROTARY CLAMP CYLINDER, MK2B40-20R

SMC ROTARY CLAMP CYLINDER, MK2B40-20R

  • Grafton, Ohio, United States
  • Jan 30th
General pipe alignment clamps 6" - 16"

General pipe alignment clamps 6" - 16"

  • Houston, Texas, United States
  • Jan 30th
4 MIXED LYNDEX DA100 COLLET CHUCKS, SHANK: BT30, 7/64, 1/8, 3/16, 13/32

4 MIXED LYNDEX DA100 COLLET CHUCKS, SHANK: BT30, 7/64, 1/8, 3/16, 13/32

  • Euclid, Ohio, United States
  • Jan 30th
4 MIXED LYNDEX DA100 COLLET CHUCKS, SHANK: BT30, 1/8, 5/32, 11/64, 11/64

4 MIXED LYNDEX DA100 COLLET CHUCKS, SHANK: BT30, 1/8, 5/32, 11/64, 11/64

  • Euclid, Ohio, United States
  • Jan 30th
ENCO MODEL 235-60 5C COLLET QUICK RELEASE

ENCO MODEL 235-60 5C COLLET QUICK RELEASE

  • Fort Myers, Florida, United States
  • Jan 30th
Erickson 400 DA collets.

Erickson 400 DA collets.

  • Columbus, Indiana, United States
  • Jan 30th
USED 25/64 HARDINGE 5C COLLET, WITH INTERNAL THREADS

USED 25/64 HARDINGE 5C COLLET, WITH INTERNAL THREADS

  • Pinellas Park, Florida, United States
  • Jan 30th
USED 31/32 RIVETT 5C COLLET,

USED 31/32 RIVETT 5C COLLET,

  • Pinellas Park, Florida, United States
  • Jan 30th
Eclipse no. 203 angle plate 7" x 5-1/2" x 4-1/2" webbed ends cast iron

Eclipse no. 203 angle plate 7" x 5-1/2" x 4-1/2" webbed ends cast iron

  • Chicago, Illinois, United States
  • Jan 30th
26" x 14" x 5" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld

26" x 14" x 5" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld

  • Grand Rapids, Michigan, United States
  • Jan 30th
42" x 15.5" x6" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld

42" x 15.5" x6" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld

  • Grand Rapids, Michigan, United States
  • Jan 30th
Electron SDS3/4 Bushing 3/4" Bore - NEW

Electron SDS3/4 Bushing 3/4" Bore - NEW

  • Bay City, Michigan, United States
  • Jan 30th
Electron SH7/8 Bushing 7/8" Bore, Missing Bolts & Set Screw - NEW

Electron SH7/8 Bushing 7/8" Bore, Missing Bolts & Set Screw - NEW

  • Bay City, Michigan, United States
  • Jan 30th
Electron/TB Woods SK114 Bushing 1 1/4" Bore - NEW

Electron/TB Woods SK114 Bushing 1 1/4" Bore - NEW

  • Bay City, Michigan, United States
  • Jan 30th
13.5" PRECISION OPTICAL ROTARY,TILTING,INSPECTION TABLE, NO HOLES,GERMAN MADE

13.5" PRECISION OPTICAL ROTARY,TILTING,INSPECTION TABLE, NO HOLES,GERMAN MADE

  • Pinellas Park, Florida, United States
  • Jan 30th
Rotary Table Top Plate

Rotary Table Top Plate

  • Portland, Connecticut, United States
  • Jan 30th
Rotary Table Top Plate 30 in. Diameter

Rotary Table Top Plate 30 in. Diameter

  • Portland, Connecticut, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies