+ Post new Ad
RIGID 614 72862 DRY CUT SAW (425659), US $529.00 – Picture 0
RIGID 614 72862 DRY CUT SAW (425659), US $529.00 – Picture 1
RIGID 614 72862 DRY CUT SAW (425659), US $529.00 – Picture 2
RIGID 614 72862 DRY CUT SAW (425659), US $529.00 – Picture 3
RIGID 614 72862 DRY CUT SAW (425659), US $529.00 – Picture 0
RIGID 614 72862 DRY CUT SAW (425659), US $529.00 – Picture 1
RIGID 614 72862 DRY CUT SAW (425659), US $529.00 – Picture 2
RIGID 614 72862 DRY CUT SAW (425659), US $529.00 – Picture 3

Rigid 614 72862 Dry Cut Saw (425659)

US $529.00

  • Warwick, Rhode Island, United States
  • Jan 30th
Open on mobile:
QR code
Ridgid 72862 Dry-Cut Saw owerful 15 amp 2HP motor Miter cut up to 45-Degree Built in maintenance tools Exclusive quick acting vise SAW, 614 DRY CUT 230V Since 1923, Ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the Ridgid brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. The Ridgid 73862 dry-cut saw features carbide-tipped blades to cut different materials and geometric configurations without cutting fluid. It generates no burr, abrasive dust or heat and provides clean, fast cuts on steel, copper, plastic and wood. Also it offers the largest cutting capacity in its class.
Condition New other (see details) :
A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Open box item with no signs of use as you can see. This is also the 110-230 volt 50-60hz model. Very heavy over 70lbs shipped. Will not be in the original packaging.”

Directions

Similar products from Saws & Sawblades

3.93" Diamond Cutting Disc Saw Blade Cut Off Wheel DIY Craft Jewelry Tool

3.93" Diamond Cutting Disc Saw Blade Cut Off Wheel DIY Craft Jewelry Tool

  • Shenzhen, China
  • Jan 30th
30/45/60 degrees Roland Cricut Cutting Plotter Vinyl Cutter Knife Blades 15pcs

30/45/60 degrees Roland Cricut Cutting Plotter Vinyl Cutter Knife Blades 15pcs

  • ???, ???, China
  • Jan 30th
Morse Steel Cutting Saw Blade CSM53832NSC <NEW>

Morse Steel Cutting Saw Blade CSM53832NSC <NEW>

  • San Tan Valley, Arizona, United States
  • Jan 30th
Bandsaw Blade Simonds Hem Saw 15 Ft 8 Inch New

Bandsaw Blade Simonds Hem Saw 15 Ft 8 Inch New

  • Cookson, Oklahoma, United States
  • Jan 30th
WELLSAW Vertical Band Saw, Mdl. V-20

WELLSAW Vertical Band Saw, Mdl. V-20

  • Massillon, Ohio, United States
  • Jan 30th
115in x 1in Lenox Band Saw Blade, .035 Thick 4/6 VP/VR, 2512173

115in x 1in Lenox Band Saw Blade, .035 Thick 4/6 VP/VR, 2512173

  • Kinder, Louisiana, United States
  • Jan 30th
DeWalt Hole Saw 1- 3/8&#034; NEW USA Bi-Metal Deep Cut Style Double Tooth

DeWalt Hole Saw 1- 3/8" NEW USA Bi-Metal Deep Cut Style Double Tooth

  • Langhorne, Pennsylvania, United States
  • Jan 30th
MILFORD BANDSAW BLADE LG 14&#039; 6&#034; W 1 1/4&#034; THICK .042 TEETH TYPE 3-4 COMBO-PR

MILFORD BANDSAW BLADE LG 14' 6" W 1 1/4" THICK .042 TEETH TYPE 3-4 COMBO-PR

  • Springfield, New Hampshire, United States
  • Jan 30th
Assortment of saws for milling machine

Assortment of saws for milling machine

  • Warren, Michigan, United States
  • Jan 30th
Blade Mfg. Co. SMC Saw Blade 12 x 1/16 x 1 x 300

Blade Mfg. Co. SMC Saw Blade 12 x 1/16 x 1 x 300

  • Kent, New York, United States
  • Jan 30th
4 STARRETT HOLE SAWS USED

4 STARRETT HOLE SAWS USED

  • Keswick, Ontario, Canada
  • Jan 30th
Craftsman 15&#034; -3 Speed Band Saw 1.5 HP 15&#034;x15&#034; Table 11 Amp 115V 1725RPM

Craftsman 15" -3 Speed Band Saw 1.5 HP 15"x15" Table 11 Amp 115V 1725RPM

  • Naperville, Illinois, United States
  • Jan 30th
LOT OF 3 SLITTING SAW &amp; MILLING CUTTER 4&#034; TO 8&#034; WITH 3 ARBORS 5/8&#034; TO 1&#034; MALCO

LOT OF 3 SLITTING SAW & MILLING CUTTER 4" TO 8" WITH 3 ARBORS 5/8" TO 1" MALCO

  • Ellington, New York, United States
  • Jan 30th
B2 Beverly Throatless Shear Blade Set

B2 Beverly Throatless Shear Blade Set

  • Cary, Illinois, United States
  • Jan 30th
NEW!! 3 LENOX BAND SAW BLADES 18&#039;6&#034; X 1/2&#034; X 4 TPI

NEW!! 3 LENOX BAND SAW BLADES 18'6" X 1/2" X 4 TPI

  • Ellington, New York, United States
  • Jan 30th
LOT OF 7 HOLE SAWS 1-1/4&#034; TO 6-1/4&#034; WITH 5/8&#034; BORE BI-METAL + DIAMOND

LOT OF 7 HOLE SAWS 1-1/4" TO 6-1/4" WITH 5/8" BORE BI-METAL + DIAMOND

  • Ellington, New York, United States
  • Jan 30th
2 PC HACKSAW SET BLUE POINT HS8A &amp; GREAT NECK NO. 100

2 PC HACKSAW SET BLUE POINT HS8A & GREAT NECK NO. 100

  • San Antonio, Texas, United States
  • Jan 30th
Disc Dia. 100mm Hole Dia. 20 mm Diamond Cutting Disc Cut Off Wheel Grinding Tool

Disc Dia. 100mm Hole Dia. 20 mm Diamond Cutting Disc Cut Off Wheel Grinding Tool

  • Shenzhen, China
  • Jan 30th
Diameter 100mm Carbon steel Cutting Disc Saw Blade Cut Wheel DIY Jewelry Craft

Diameter 100mm Carbon steel Cutting Disc Saw Blade Cut Wheel DIY Jewelry Craft

  • Shenzhen, China
  • Jan 30th
3x Grit 80 Diamond Cutting Disc Saw Blade Cut Off Wheel DIY Craft Jewelry Tool

3x Grit 80 Diamond Cutting Disc Saw Blade Cut Off Wheel DIY Craft Jewelry Tool

  • Shenzhen, China
  • Jan 30th

People who viewed this item also vieved

10 pieces Valenite inserts, VNMP32E VC7

10 pieces Valenite inserts, VNMP32E VC7

  • Herington, Kansas, United States
  • Jan 30th
(10) NOS VR/Wesson Carbide Indexable Inserts USA, SNU 633 Grade 2A5, WCO 195W

(10) NOS VR/Wesson Carbide Indexable Inserts USA, SNU 633 Grade 2A5, WCO 195W

  • Wheeling, West Virginia, United States
  • Jan 30th
MACHINIST End MILL Lot of 6 Machinist End Mill Cutters used 1/2&#034;shank 1 cobalt

MACHINIST End MILL Lot of 6 Machinist End Mill Cutters used 1/2"shank 1 cobalt

  • Astoria, New York, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist End Mill s Cutters for Milling Machine

MACHINIST LATHE MILL Lot of Machinist End Mill s Cutters for Milling Machine

  • Morris Plains, New Jersey, United States
  • Jan 30th
20MM CAPSCEW COUNTERBORE EDP 91835

20MM CAPSCEW COUNTERBORE EDP 91835

  • Grand Rapids, Michigan, United States
  • Jan 30th
MA FORD 41750127E EDGEHOG CYLINDRICAL CARBIDE BURRS, 3/4&#034; X 3/4&#034; X 1/4&#034;

MA FORD 41750127E EDGEHOG CYLINDRICAL CARBIDE BURRS, 3/4" X 3/4" X 1/4"

  • Euclid, Ohio, United States
  • Jan 30th
(#4997) New Machinist American Made Cobalt No.3 Chucking Reamer

(#4997) New Machinist American Made Cobalt No.3 Chucking Reamer

  • Troy, Michigan, United States
  • Feb 15th
(#5022) Used Machinist No.0 Straight Flute Taper Pin Reamer

(#5022) Used Machinist No.0 Straight Flute Taper Pin Reamer

  • Troy, Michigan, United States
  • Feb 15th
Vintage MarkRite 3/32 Heavy Alloy Steel Punch Stamp Number Set 0-8 Part No 10630

Vintage MarkRite 3/32 Heavy Alloy Steel Punch Stamp Number Set 0-8 Part No 10630

  • Coventry, Connecticut, United States
  • Feb 25th
Dayton VPB 75 150 Punch 3/4&#034; OD 5 pcs YES 5 pcs

Dayton VPB 75 150 Punch 3/4" OD 5 pcs YES 5 pcs

  • Montebello, California, United States
  • Feb 25th
10 New Migatron SNG454X ceramic cutting tool inserts indexable carbide SNG 454X

10 New Migatron SNG454X ceramic cutting tool inserts indexable carbide SNG 454X

  • Winona, Minnesota, United States
  • May 26th
7 new SANDVIK Coromant RNGA 43T0320 650 T-MAX P Ceramic Turning Inserts

7 new SANDVIK Coromant RNGA 43T0320 650 T-MAX P Ceramic Turning Inserts

  • Champlain, New York, United States
  • May 27th
Jancy Engineering Company Jancy Slugger AA3418 Short Adaptor for Drill Press

Jancy Engineering Company Jancy Slugger AA3418 Short Adaptor for Drill Press

  • USA, United States
  • May 24th
L600mm SFU1605 Ball Screw Single Ballnut Ballscrew HP1

L600mm SFU1605 Ball Screw Single Ballnut Ballscrew HP1

  • China, China
  • May 24th
Hougen 14005 Electrician&#039;s &amp; Fabricator&#039;s Holcutter Kit

Hougen 14005 Electrician's & Fabricator's Holcutter Kit

  • Glassboro, New Jersey, United States
  • May 26th
Hougen 18232 1&#034; x 2&#034; Depth of Cut Copperhead Carbide Tip Annular Cutter

Hougen 18232 1" x 2" Depth of Cut Copperhead Carbide Tip Annular Cutter

  • Glassboro, New Jersey, United States
  • May 26th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies