+ Post new Ad
WELLSAW Vertical Band Saw, Mdl. V-20, US $6,750.00 – Picture 0
WELLSAW Vertical Band Saw, Mdl. V-20, US $6,750.00 – Picture 1
WELLSAW Vertical Band Saw, Mdl. V-20, US $6,750.00 – Picture 2
WELLSAW Vertical Band Saw, Mdl. V-20, US $6,750.00 – Picture 3
WELLSAW Vertical Band Saw, Mdl. V-20, US $6,750.00 – Picture 4
WELLSAW Vertical Band Saw, Mdl. V-20, US $6,750.00 – Picture 5
WELLSAW Vertical Band Saw, Mdl. V-20, US $6,750.00 – Picture 6
WELLSAW Vertical Band Saw, Mdl. V-20, US $6,750.00 – Picture 0
WELLSAW Vertical Band Saw, Mdl. V-20, US $6,750.00 – Picture 1
WELLSAW Vertical Band Saw, Mdl. V-20, US $6,750.00 – Picture 2
WELLSAW Vertical Band Saw, Mdl. V-20, US $6,750.00 – Picture 3
WELLSAW Vertical Band Saw, Mdl. V-20, US $6,750.00 – Picture 4
WELLSAW Vertical Band Saw, Mdl. V-20, US $6,750.00 – Picture 5
WELLSAW Vertical Band Saw, Mdl. V-20, US $6,750.00 – Picture 6

Wellsaw Vertical Band Saw, Mdl. V-20

US $6,750.00

  • Massillon, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
Purchased two indentical units in 2013 to cut gates from aluminum castings for a large project which was used for a six month period. We purchased these saws new at a cost of $8900.00 each.This unit is set up with 1" blade guides, a spray mister, an auto brush to clean saw teeth with an adjustable air blow at table and work light. The table is adjustable and has an offset slot for a straight line guide fixture. Saw is ready to ship and is bolted on heavy skid ready for your pickup or we will load onto your carrier for LTL delivery.

Directions

Similar products from Saws & Sawblades

Jet Cold Saw Model: J-F225 Componenets: Tend TC11, Tend THR12, F225-175C

Jet Cold Saw Model: J-F225 Componenets: Tend TC11, Tend THR12, F225-175C

  • Atkins, Arkansas, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Saw Slitting Gear Cutting Key Way Blade s for Mill

MACHINIST LATHE MILL Lot of Saw Slitting Gear Cutting Key Way Blade s for Mill

  • Morris Plains, New Jersey, United States
  • Jan 30th
DoALL 9x16 Horizontal Band Saw C-916-S Bandsaw

DoALL 9x16 Horizontal Band Saw C-916-S Bandsaw

  • Rice, Minnesota, United States
  • Jan 30th
HYD-MECH S-20P Semi-Automatic Scissor Style Band Saw

HYD-MECH S-20P Semi-Automatic Scissor Style Band Saw

  • Rice, Minnesota, United States
  • Jan 30th
2 MORSE BAND SAW BLADES 7'5" MAT 1/2 35 10/14 4WB98

2 MORSE BAND SAW BLADES 7'5" MAT 1/2 35 10/14 4WB98

  • United States
  • Jan 30th
wallace hardpoint swedish steel bow saw blade s21-21"

wallace hardpoint swedish steel bow saw blade s21-21"

  • Astoria, New York, United States
  • Jan 30th
3.93" Diamond Cutting Disc Saw Blade Cut Off Wheel DIY Craft Jewelry Tool

3.93" Diamond Cutting Disc Saw Blade Cut Off Wheel DIY Craft Jewelry Tool

  • Shenzhen, China
  • Jan 30th
30/45/60 degrees Roland Cricut Cutting Plotter Vinyl Cutter Knife Blades 15pcs

30/45/60 degrees Roland Cricut Cutting Plotter Vinyl Cutter Knife Blades 15pcs

  • ???, ???, China
  • Jan 30th
Morse Steel Cutting Saw Blade CSM53832NSC <NEW>

Morse Steel Cutting Saw Blade CSM53832NSC <NEW>

  • San Tan Valley, Arizona, United States
  • Jan 30th
Bandsaw Blade Simonds Hem Saw 15 Ft 8 Inch New

Bandsaw Blade Simonds Hem Saw 15 Ft 8 Inch New

  • Cookson, Oklahoma, United States
  • Jan 30th
115in x 1in Lenox Band Saw Blade, .035 Thick 4/6 VP/VR, 2512173

115in x 1in Lenox Band Saw Blade, .035 Thick 4/6 VP/VR, 2512173

  • Kinder, Louisiana, United States
  • Jan 30th
DeWalt Hole Saw 1- 3/8&#034; NEW USA Bi-Metal Deep Cut Style Double Tooth

DeWalt Hole Saw 1- 3/8" NEW USA Bi-Metal Deep Cut Style Double Tooth

  • Langhorne, Pennsylvania, United States
  • Jan 30th
MILFORD BANDSAW BLADE LG 14&#039; 6&#034; W 1 1/4&#034; THICK .042 TEETH TYPE 3-4 COMBO-PR

MILFORD BANDSAW BLADE LG 14' 6" W 1 1/4" THICK .042 TEETH TYPE 3-4 COMBO-PR

  • Springfield, New Hampshire, United States
  • Jan 30th
Assortment of saws for milling machine

Assortment of saws for milling machine

  • Warren, Michigan, United States
  • Jan 30th
Blade Mfg. Co. SMC Saw Blade 12 x 1/16 x 1 x 300

Blade Mfg. Co. SMC Saw Blade 12 x 1/16 x 1 x 300

  • Kent, New York, United States
  • Jan 30th
RIGID 614 72862 DRY CUT SAW (425659)

RIGID 614 72862 DRY CUT SAW (425659)

  • Warwick, Rhode Island, United States
  • Jan 30th
4 STARRETT HOLE SAWS USED

4 STARRETT HOLE SAWS USED

  • Keswick, Ontario, Canada
  • Jan 30th
Craftsman 15&#034; -3 Speed Band Saw 1.5 HP 15&#034;x15&#034; Table 11 Amp 115V 1725RPM

Craftsman 15" -3 Speed Band Saw 1.5 HP 15"x15" Table 11 Amp 115V 1725RPM

  • Naperville, Illinois, United States
  • Jan 30th
LOT OF 3 SLITTING SAW &amp; MILLING CUTTER 4&#034; TO 8&#034; WITH 3 ARBORS 5/8&#034; TO 1&#034; MALCO

LOT OF 3 SLITTING SAW & MILLING CUTTER 4" TO 8" WITH 3 ARBORS 5/8" TO 1" MALCO

  • Ellington, New York, United States
  • Jan 30th
B2 Beverly Throatless Shear Blade Set

B2 Beverly Throatless Shear Blade Set

  • Cary, Illinois, United States
  • Jan 30th

People who viewed this item also vieved

Lot of 10, Valenite Carbide Inserts VDGT 188, Grade 2KK5- Unused

Lot of 10, Valenite Carbide Inserts VDGT 188, Grade 2KK5- Unused

  • Maricopa, Arizona, United States
  • Jan 30th
Lot of 19 TPG 2.522 Kelly - Western Carbide Inserts - Unused

Lot of 19 TPG 2.522 Kelly - Western Carbide Inserts - Unused

  • Maricopa, Arizona, United States
  • Jan 30th
VERY NICE FOUR ULTRATOOL 5/16&#034; SOLID CARBIDE ENDMILLS

VERY NICE FOUR ULTRATOOL 5/16" SOLID CARBIDE ENDMILLS

  • Rancho Cucamonga, California, United States
  • Jan 30th
NEW! ATRAX 1/2&#034; DOUBLE END SOLID CARBIDE ENDMILL

NEW! ATRAX 1/2" DOUBLE END SOLID CARBIDE ENDMILL

  • Rancho Cucamonga, California, United States
  • Jan 30th
Fowler 72-483-125 Disposable Deburring Tool With Pocket Clip (72483125)

Fowler 72-483-125 Disposable Deburring Tool With Pocket Clip (72483125)

  • United States
  • Jan 30th
MILWAUKEE 49-57-5000 Threaded Steel Hawg Cutter,5 In

MILWAUKEE 49-57-5000 Threaded Steel Hawg Cutter,5 In

  • Chicopee, Massachusetts, United States
  • Jan 30th
(#5001) New Machinist American Made No.50 Chucking Reamer

(#5001) New Machinist American Made No.50 Chucking Reamer

  • Troy, Michigan, United States
  • Feb 15th
(#5003) New Machinist USA Made .186 Carbide Tipped Chucking Reamer

(#5003) New Machinist USA Made .186 Carbide Tipped Chucking Reamer

  • Troy, Michigan, United States
  • Feb 15th
STRIPPIT PUNCH AND DIE GRINDER

STRIPPIT PUNCH AND DIE GRINDER

  • Lake Forest, California, United States
  • Feb 25th
Press Brake Die Set (36&#034;x2 7/8&#034;x1 5/8&#034; &amp; 36&#034;x3 5/8&#034;x1 1/8&#034;)

Press Brake Die Set (36"x2 7/8"x1 5/8" & 36"x3 5/8"x1 1/8")

  • Middleville, Michigan, United States
  • Feb 25th
10 pcs ROMAY CORPORATION DNGA 433 T7 CC-5143 Ceramic Inserts

10 pcs ROMAY CORPORATION DNGA 433 T7 CC-5143 Ceramic Inserts

  • Champlain, New York, United States
  • May 25th
4 + LBS of Scrap Carbide lot Endmills High Grade

4 + LBS of Scrap Carbide lot Endmills High Grade

  • Penrose, North Carolina, United States
  • May 26th
Revo 9/16 x 2 High Speed Steel (HSS) Annular Cutter with Pilot Pin

Revo 9/16 x 2 High Speed Steel (HSS) Annular Cutter with Pilot Pin

  • Medina, Ohio, United States
  • May 24th
1-3/8 X 1/2 UNI-KUT FLY TOOL CUTTER-- USES 5/16 TOOL BITS---- K-123

1-3/8 X 1/2 UNI-KUT FLY TOOL CUTTER-- USES 5/16 TOOL BITS---- K-123

  • Hanover Park, Illinois, United States
  • May 24th
Hougen 18224 3/4&#034; x 2&#034; Depth of Cut Copperhead Carbide Tip Annular Cutter

Hougen 18224 3/4" x 2" Depth of Cut Copperhead Carbide Tip Annular Cutter

  • Glassboro, New Jersey, United States
  • May 26th
Hougen 17800 Fabricator&#039;s Kit 1/2&#034;, 5/8&#034; &amp; 3/4&#034; (For HMD150 only)

Hougen 17800 Fabricator's Kit 1/2", 5/8" & 3/4" (For HMD150 only)

  • Glassboro, New Jersey, United States
  • May 26th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies