+ Post new Ad
Rivett NEW OLD STOCK , cross slide compound feed screw? Early 608, 8" pre. Lathe, US $1500 – Picture 0
Rivett NEW OLD STOCK , cross slide compound feed screw? Early 608, 8" pre. Lathe, US $1500 – Picture 1
Rivett NEW OLD STOCK , cross slide compound feed screw? Early 608, 8" pre. Lathe, US $1500 – Picture 0
Rivett NEW OLD STOCK , cross slide compound feed screw? Early 608, 8" pre. Lathe, US $1500 – Picture 1

Rivett New Old Stock , Cross Slide Compound Feed Screw? Early 608, 8" Pre. Lathe

US $1500

  • Kansas City, Missouri, United States
  • Jan 30th
Open on mobile:
QR code
These are New Old Stock Rivett lathe screws that are storied (I use that word because I did not see them come out of the factory) to have come from the repair department at the Rivett factory. I bought these along with a whole lot of stuff about 20 years ago from a collector in California. I sold a bunch of stuff back then but kept some for my personal use and now it is time to thin out that. I think these fit the EARLY Rivett compound slides and MILLING attachment. NOTE, they have GRADUATED COLLARS. They will however take some fitting, they will not just screw into place because these lathes were made for nearly 80 years and there are a lot of differences from one to the next.. These are 3/8" 10 left hand. Look back about a year on the Yahoo Rivett site for a in depth discussion on fitting these along with detailed dimensions and specs.. Also on the Yahoo group you will see the cost to make new one greatly exceeded the starting price and for practical purposes that project has been cancelled…… so, this is you chance……. $8.00 shipping to the lower 48 states, all others at cost.

Directions

Similar products from Tools for Lathe Machines

9" 10k SOUTH BEND LATHE 1/2 NUTS SPLIT NUTS & STUDS

9" 10k SOUTH BEND LATHE 1/2 NUTS SPLIT NUTS & STUDS

  • Belle Mead, New Jersey, United States
  • Jan 30th
9" 10K SOUTH BEND LATHE 80 TOOTH CHANGE GEAR

9" 10K SOUTH BEND LATHE 80 TOOTH CHANGE GEAR

  • Belle Mead, New Jersey, United States
  • Jan 30th
9" SOUTH BEND LATHE HEADSTOCK CLAMPS & BOLTS HEAD STOCK

9" SOUTH BEND LATHE HEADSTOCK CLAMPS & BOLTS HEAD STOCK

  • Belle Mead, New Jersey, United States
  • Jan 30th
HARDINGE LATHE KNURLING TOOL, GOOD USED.

HARDINGE LATHE KNURLING TOOL, GOOD USED.

  • Overland Park, Kansas, United States
  • Jan 30th
LATHE RADUIS TURNING TOOL, 9" TO 20" LATHES.

LATHE RADUIS TURNING TOOL, 9" TO 20" LATHES.

  • Overland Park, Kansas, United States
  • Jan 30th
SOUTH BEND 9" 10K GEAR GUARD DOOR HINGE WITH 1/2" MOUNTING HOLE 147N2

SOUTH BEND 9" 10K GEAR GUARD DOOR HINGE WITH 1/2" MOUNTING HOLE 147N2

  • San Mateo, California, United States
  • Jan 30th
Rivett Dock lathe threading attachment cutter 608, very rare

Rivett Dock lathe threading attachment cutter 608, very rare

  • Kansas City, Missouri, United States
  • Jan 30th
SOUTH BEND 9" METAL LATHE BANJO

SOUTH BEND 9" METAL LATHE BANJO

  • San Mateo, California, United States
  • Jan 30th
Rivett NEW OLD STOCK , set of two, cross feed screws with nuts, 608, 505 Lathe

Rivett NEW OLD STOCK , set of two, cross feed screws with nuts, 608, 505 Lathe

  • Kansas City, Missouri, United States
  • Jan 30th
Rivett NEW OLD STOCK , compound feed screws with nut, 608, 505 Lathe

Rivett NEW OLD STOCK , compound feed screws with nut, 608, 505 Lathe

  • Kansas City, Missouri, United States
  • Jan 30th
GAUER SHEET METAL SAFETY EDGER

GAUER SHEET METAL SAFETY EDGER

  • Matawan, New Jersey, United States
  • Jan 30th
Zeus cut knurling tools - straight profile cutting

Zeus cut knurling tools - straight profile cutting

  • Oakville, Ontario, Canada
  • Jan 30th
3AT Collets, adaptor nose and draw bar, Logan Lathe, P & W, South Bend, Atlas

3AT Collets, adaptor nose and draw bar, Logan Lathe, P & W, South Bend, Atlas

  • Kansas City, Missouri, United States
  • Jan 30th
ATLAS CRAFTSMAN 6" METAL LATHE COMPOUND TOOL POST REST SCREW NUT ASSEMBLY M6-305

ATLAS CRAFTSMAN 6" METAL LATHE COMPOUND TOOL POST REST SCREW NUT ASSEMBLY M6-305

  • Youngstown, Ohio, United States
  • Jan 30th
Atlas Craftsman 6" Lathe Compound Cross Slide Handle and Retaining Ring

Atlas Craftsman 6" Lathe Compound Cross Slide Handle and Retaining Ring

  • Youngstown, Ohio, United States
  • Jan 30th
6" Atlas Craftsman 618 101 Lathe Steady Rest M6 326

6" Atlas Craftsman 618 101 Lathe Steady Rest M6 326

  • Youngstown, Ohio, United States
  • Jan 30th
METAL LATHE FACE PLATE SOUTH BEND LOGAN SHELTON 7 3/8" NEW

METAL LATHE FACE PLATE SOUTH BEND LOGAN SHELTON 7 3/8" NEW

  • Soquel, California, United States
  • Jan 30th
Lathe Tooling carbin steel foor making tooling.

Lathe Tooling carbin steel foor making tooling.

  • Bethlehem, Pennsylvania, United States
  • Jan 30th
lead screw for logan /atlas lathe 18 tpi x 31 1/2 with carrier bracket

lead screw for logan /atlas lathe 18 tpi x 31 1/2 with carrier bracket

  • Plantsville, Connecticut, United States
  • Jan 30th
ALORIS ADJUSTABLE SHANK TOOL HOLDER LH RH TURN FACE CHAMFER INDEXABLE + INSERT

ALORIS ADJUSTABLE SHANK TOOL HOLDER LH RH TURN FACE CHAMFER INDEXABLE + INSERT

  • Jamestown, New York, United States
  • Jan 30th

People who viewed this item also vieved

wells Tap CHASER mix brand six pieces

wells Tap CHASER mix brand six pieces

  • Brooklyn, New York, United States
  • Jan 30th
SGS USA 2 1/4" Flat Burr Double Cut Solid Carbide Tool FGR# 6-1 STY A

SGS USA 2 1/4" Flat Burr Double Cut Solid Carbide Tool FGR# 6-1 STY A

  • Keller, Texas, United States
  • Jan 30th
Melin hsp3 3/4-82 cobalt countersink

Melin hsp3 3/4-82 cobalt countersink

  • Swansea, Massachusetts, United States
  • Jan 30th
LOT OF 5 ASSORTED INTERNAL GRINDING SPINDLES

LOT OF 5 ASSORTED INTERNAL GRINDING SPINDLES

  • Ellington, New York, United States
  • Jan 30th
LOT OF 6 ASSORTED INTERNAL GRINDING SPINDLES

LOT OF 6 ASSORTED INTERNAL GRINDING SPINDLES

  • Ellington, New York, United States
  • Jan 30th
LOT OF ASSORTED PULLEYS FOR TOOL POST GRINDERS + WHEEL FLANGES & SPINDLES DUMORE

LOT OF ASSORTED PULLEYS FOR TOOL POST GRINDERS + WHEEL FLANGES & SPINDLES DUMORE

  • Ellington, New York, United States
  • Jan 30th
BEAVER TOOLS NMTB 50 FACE MILL ADAPTER 1-1/4" STK 1541

BEAVER TOOLS NMTB 50 FACE MILL ADAPTER 1-1/4" STK 1541

  • Wadley, Alabama, United States
  • Jan 30th
BEAVER TOOLS NMTB 50 FACE MILL ADAPTER 2" STK 1540

BEAVER TOOLS NMTB 50 FACE MILL ADAPTER 2" STK 1540

  • Wadley, Alabama, United States
  • Jan 30th
Fly Cutter Set of 3........MAXI-KUT

Fly Cutter Set of 3........MAXI-KUT

  • Hopatcong, New Jersey, United States
  • Jan 30th
WALTER TYPE RTS 500, ROTARY TABLE INDEXING TILTING

WALTER TYPE RTS 500, ROTARY TABLE INDEXING TILTING

  • Santa Paula, California, United States
  • Jan 30th
Sherr Tumico – Optical Projector – Shadowgraph – Inventory #4847

Sherr Tumico – Optical Projector – Shadowgraph – Inventory #4847

  • Farmingdale, New York, United States
  • Jan 30th
CHUAN BRAND OUTSIDE MICROMETER 4-5' TO 11-12" QTY 8

CHUAN BRAND OUTSIDE MICROMETER 4-5' TO 11-12" QTY 8

  • Clinton Township, Michigan, United States
  • Jan 30th
General Pneumatic Single Cylinder "Alligator" Squeezer

General Pneumatic Single Cylinder "Alligator" Squeezer

  • Gatineau, Quebec, Canada
  • Feb 13th
4 Piece Sealant Spoon Kit BAT-SSK4 Brown Tools. Aviation

4 Piece Sealant Spoon Kit BAT-SSK4 Brown Tools. Aviation

  • Newhall, California, United States
  • Feb 14th
FOURSLIDE NILSON LOT OF USED PARTS, CONDITION.USED.

FOURSLIDE NILSON LOT OF USED PARTS, CONDITION.USED.

  • Bristol, Connecticut, United States
  • Feb 14th
Sunnen honing stone set S18 A65 ---2 sets

Sunnen honing stone set S18 A65 ---2 sets

  • Macedon, New York, United States
  • Feb 15th
Sunnen honing stone set W47 J45 ---2 sets

Sunnen honing stone set W47 J45 ---2 sets

  • Macedon, New York, United States
  • Feb 15th
Sunnen honing stone set W47 A63 ---2 sets

Sunnen honing stone set W47 A63 ---2 sets

  • Macedon, New York, United States
  • Feb 15th
GEOMETRIC CHASERS FOR 5/16" DS DIE HEAD QUALITY CHASER 3.5MM x .6 MM 10 HOOK

GEOMETRIC CHASERS FOR 5/16" DS DIE HEAD QUALITY CHASER 3.5MM x .6 MM 10 HOOK

  • Lindenhurst, New York, United States
  • Feb 25th
GEOMETRIC CHASERS FOR 5/16" DS DIE HEAD QUALITY CHASER 4MM x .7 MM 10 HOOK

GEOMETRIC CHASERS FOR 5/16" DS DIE HEAD QUALITY CHASER 4MM x .7 MM 10 HOOK

  • Lindenhurst, New York, United States
  • Feb 25th
DAVENPORT / SLITTERS 62-77 HOLDER

DAVENPORT / SLITTERS 62-77 HOLDER

  • Churchville, New York, United States
  • Feb 26th
Lower head repair kit, Charmilles edm, black head, new in box, 204617970

Lower head repair kit, Charmilles edm, black head, new in box, 204617970

  • Davis Junction, Illinois, United States
  • Mar 4th
MACHINIST LATHE MILL EDM System 3R Block a

MACHINIST LATHE MILL EDM System 3R Block a

  • Morris Plains, New Jersey, United States
  • Mar 5th
MACHINIST LATHE MILL EDM System 3R Block ?

MACHINIST LATHE MILL EDM System 3R Block ?

  • Morris Plains, New Jersey, United States
  • Mar 5th
Mori Seiki MV-65/50

Mori Seiki MV-65/50

  • Shawano, Wisconsin, United States
  • Apr 23rd
Hyd-Mech Model H-12A Automatic Horizontal Cut-off Band Saw, New 1997.

Hyd-Mech Model H-12A Automatic Horizontal Cut-off Band Saw, New 1997.

  • Dayton, Ohio, United States
  • Apr 24th
Grob 4V-24 Vertical ,Variable Speed ,Band Saw

Grob 4V-24 Vertical ,Variable Speed ,Band Saw

  • Valley View, Pennsylvania, United States
  • Apr 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies