+ Post new Ad
RN Battery Charger Car Bike Fork Lift Made In USA Model 1262 6 & 12 Volt, US $107.75 – Picture 0
RN Battery Charger Car Bike Fork Lift Made In USA Model 1262 6 & 12 Volt, US $107.75 – Picture 0

Rn Battery Charger Car Bike Fork Lift Made In Usa Model 1262 6 & 12 Volt

US $107.75

  • Columbus, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
RN Battery Charger Made In USA Model 1262 DUAL RATE 12 and 2 AMP for Fast and Slow Charge For Charging: Conventional, Maintenance Free, AGM, Gel Cell, Deep Cycle and Marine Batteries. 2 AMP Charge Rate for Charging 1)Motorcycle 2)Garden Tractor 3)Snowmobile Batteries Can Charge 6/12 Volts Batteries Efficiently within 1 1/2-3 hours All COPPER transformer SILICON Rectifiers Will Supply Full Charge when Needed and Tapers to Slow Charge as Battery Builds Up Automatic Circuit Breaker -- Guards Battery and Charger Compactness, Quality and High Power with Guaranteed Reliability Will Give Many Years of Trouble Free Service and Adds to the Life of Battery One Year Warranty Made in the USA SPECIFICATIONS Input: 120 Volts - 2.4 AMP. 60 HZ. (6 ft. cord) Output: 6/12 V. DC 12 AMP Dimensions: 7.5 x 6.5 x 5.5 Inches Made In the $FREE Shipping Inside Continental 48 United States. Alaska & Hawaii & International buyers pay priority cost. We require a physical address on all items Sorry NO P.O. Box. 575 N. Hague Ave. Columbus, Ohio. 43204 Phone # 1-800-543-5998 Need any help looking please call. After purchasing, pay instantly with your credit card through PayPal!
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer RN Industries
MPN 1262
Brand Portable
Country of Manufacture United States

Directions

Similar products from Other Tool Retention Items

Greenleaf Carbide Insert Holder, 411151-2VRS. V-Bottom Round Toolholder, USED.

Greenleaf Carbide Insert Holder, 411151-2VRS. V-Bottom Round Toolholder, USED.

  • Valencia, California, United States
  • Jan 30th
Kennametal Combination Chamfer & Drill Tool Holder, SEFAS, Mfg. #1604279, USED

Kennametal Combination Chamfer & Drill Tool Holder, SEFAS, Mfg. #1604279, USED

  • Valencia, California, United States
  • Jan 30th
Kennametal Combination Chamfer & Drill Holder, Mfg1604280, toolholder only. USED

Kennametal Combination Chamfer & Drill Holder, Mfg1604280, toolholder only. USED

  • Valencia, California, United States
  • Jan 30th
INGERSOLL 6K6V-04L01 FACE MILL ON VALENITE CAT 40 TOOL HOLDER

INGERSOLL 6K6V-04L01 FACE MILL ON VALENITE CAT 40 TOOL HOLDER

  • Elkhart Lake, Wisconsin, United States
  • Jan 30th
Mazak Live Tool Holder 535 | 80 | 0300

Mazak Live Tool Holder 535 | 80 | 0300

  • Buffalo, New York, United States
  • Jan 30th
Mazak Live Tool Holder 535 | 80 | 0700

Mazak Live Tool Holder 535 | 80 | 0700

  • Buffalo, New York, United States
  • Jan 30th
DEVCON PLASTIC STEEL PUTTY ORIGINAL METAL EPOXY #10110

DEVCON PLASTIC STEEL PUTTY ORIGINAL METAL EPOXY #10110

  • Columbus, Ohio, United States
  • Jan 30th
Citizen GSE3207 3-FRONT, 3 BACK END FACE SPINDLE (ER11) AND BRACKET

Citizen GSE3207 3-FRONT, 3 BACK END FACE SPINDLE (ER11) AND BRACKET

  • Rocklin, California, United States
  • Jan 30th
Citizen GSD106 Gear Housing for L20E-IX and L20-X

Citizen GSD106 Gear Housing for L20E-IX and L20-X

  • Rocklin, California, United States
  • Jan 30th
Citizen GSE3110 Gang Tool Block for L20E-IX and L20-X

Citizen GSE3110 Gang Tool Block for L20E-IX and L20-X

  • Rocklin, California, United States
  • Jan 30th
LOT OF 2 VALENITE CTGPR-12-3B LATHE TOOLHOLDERS

LOT OF 2 VALENITE CTGPR-12-3B LATHE TOOLHOLDERS

  • Minneapolis, Minnesota, United States
  • Jan 30th
LOT OF 2 VALENITE 2T3 CTGPR-12-3B LATHE TOOLHOLDERS

LOT OF 2 VALENITE 2T3 CTGPR-12-3B LATHE TOOLHOLDERS

  • Minneapolis, Minnesota, United States
  • Jan 30th
Lot of 8 Federal Dial Indicator B30 B70 B71-H B70 With Mounting Blocks

Lot of 8 Federal Dial Indicator B30 B70 B71-H B70 With Mounting Blocks

  • Maine, New York, United States
  • Jan 30th
helicoil 7751-8

helicoil 7751-8

  • Baxley, Georgia, United States
  • Jan 30th
6 SCHUNK 0205356 HSK-C-40 SHANK TENDO HYDRAULIC TOOLHOLDERS

6 SCHUNK 0205356 HSK-C-40 SHANK TENDO HYDRAULIC TOOLHOLDERS

  • Euclid, Ohio, United States
  • Jan 30th
Iscar MIFHR 12.7C-10 Bar for Face & Internal Grooving Undercutting Threading

Iscar MIFHR 12.7C-10 Bar for Face & Internal Grooving Undercutting Threading

  • Rochester, New York, United States
  • Jan 30th
Sunnen 5" 3 Jaw Chuck. #MB770

Sunnen 5" 3 Jaw Chuck. #MB770

  • Highland, Michigan, United States
  • Jan 30th
Kennametal Indexable Turning Toolholder DTGNL-165D INSERT TN-54

Kennametal Indexable Turning Toolholder DTGNL-165D INSERT TN-54

  • Follansbee, West Virginia, United States
  • Jan 30th
NOS C.H. Hanson 80120 Automatic Locking C-Clamp Kit, 4 pc Set Free Shipping

NOS C.H. Hanson 80120 Automatic Locking C-Clamp Kit, 4 pc Set Free Shipping

  • Denver, Colorado, United States
  • Jan 30th
Sunnen Cutting Head Assembly. #ASPC-1875 Range 1.875"- 2.062"

Sunnen Cutting Head Assembly. #ASPC-1875 Range 1.875"- 2.062"

  • Highland, Michigan, United States
  • Jan 30th

People who viewed this item also vieved

DeVlieg Microbore 50CT-AE75-40

DeVlieg Microbore 50CT-AE75-40

  • Sterling Heights, Michigan, United States
  • Jun 6th
KENNAMETAL CAT 40 TAPER BORING HEAD cnc mill milling machine tool holder TBH50A

KENNAMETAL CAT 40 TAPER BORING HEAD cnc mill milling machine tool holder TBH50A

  • Milroy, Indiana, United States
  • Jun 7th
3/4" KENNAMETAL CARBIDE BORING BAR E12-NKLCL05 W/ 5 KENN INSERT NPGR52R {H276}

3/4" KENNAMETAL CARBIDE BORING BAR E12-NKLCL05 W/ 5 KENN INSERT NPGR52R {H276}

  • Mentor, Ohio, United States
  • May 24th
1 NEW 1/2" SOLID CARBIDE BORING BAR. C08-SCLCR-2 TAKES CCMT 21.5 INSERT. {Z265}

1 NEW 1/2" SOLID CARBIDE BORING BAR. C08-SCLCR-2 TAKES CCMT 21.5 INSERT. {Z265}

  • Mentor, Ohio, United States
  • May 24th
Sandvik Carbide Turning Insert, WNMG 434-KM 3205

Sandvik Carbide Turning Insert, WNMG 434-KM 3205

  • Assumption, Illinois, United States
  • May 26th
SMP Mandrin Flottant Universal C22025L00 Floating Chuck

SMP Mandrin Flottant Universal C22025L00 Floating Chuck

  • Aurora, Nebraska, United States
  • May 26th
Scully & Jones #6 Morse Taper OD to #4 Morse Taper ID Adaptor

Scully & Jones #6 Morse Taper OD to #4 Morse Taper ID Adaptor

  • Johnson City, New York, United States
  • May 27th
Phase II 222-776, 290-0804 R8 Taper w/ 4JT Drill Chuck Arbor

Phase II 222-776, 290-0804 R8 Taper w/ 4JT Drill Chuck Arbor

  • Chillicothe, Missouri, United States
  • May 27th
12 - Drill Bushing Handles , Slip Fit drill bushing, Drill Guide, Reamer Bushing

12 - Drill Bushing Handles , Slip Fit drill bushing, Drill Guide, Reamer Bushing

  • Weatherford, Texas, United States
  • May 27th
MARTIN TAPERLOCK BUSHING 2012 SERIES 1-5/8" BORE

MARTIN TAPERLOCK BUSHING 2012 SERIES 1-5/8" BORE

  • North Olmsted, Ohio, United States
  • May 27th
SECO BT40 D16 COLLET CHUCK E3414 5872 16160 STK9394

SECO BT40 D16 COLLET CHUCK E3414 5872 16160 STK9394

  • Wadley, Alabama, United States
  • May 29th
PARLEC BT40 SHELL MILL ADAPTER 1" ARBOR 2" PROJECTION STK9393

PARLEC BT40 SHELL MILL ADAPTER 1" ARBOR 2" PROJECTION STK9393

  • Wadley, Alabama, United States
  • May 29th
Ultron Snap-Change Toolholder - Holder takes DA180 Erickson collets. 9 collets

Ultron Snap-Change Toolholder - Holder takes DA180 Erickson collets. 9 collets

  • Costa Mesa, California, United States
  • Jun 9th
7/8 TAP COLLET FOR 7/8" & M22 TAP FOR BILZ #2 TMS AND OTHERS TAP ADAPTER D14090

7/8 TAP COLLET FOR 7/8" & M22 TAP FOR BILZ #2 TMS AND OTHERS TAP ADAPTER D14090

  • Dayton, Ohio, United States
  • Jun 9th
JACOBS CHUCK 0 - 1/4" Mdel # SM1G61 " NEW "

JACOBS CHUCK 0 - 1/4" Mdel # SM1G61 " NEW "

  • Sequim, Washington, United States
  • Jun 9th
Generic Drill Chuck 1/32" X 3/8" Mount 2JT Key K34

Generic Drill Chuck 1/32" X 3/8" Mount 2JT Key K34

  • Venice, Florida, United States
  • Jun 9th
Pexto Cut-off Shear Bar Blade #SP200

Pexto Cut-off Shear Bar Blade #SP200

  • Bonney Lake, Washington, United States
  • Jun 18th
L10-308AH SUNNEN HONE MANDREL W/ ADAPTER .308" - .316"

L10-308AH SUNNEN HONE MANDREL W/ ADAPTER .308" - .316"

  • Cleveland, Ohio, United States
  • Jun 18th
Nema 23 2phase 0.7N.m 99ozf.in stepper Motor 57mm frame 6.35mm shaft 57J1841-420

Nema 23 2phase 0.7N.m 99ozf.in stepper Motor 57mm frame 6.35mm shaft 57J1841-420

  • DongGuan, China
  • Oct 28th
Nema 17 2phase 0.44N.m 62ozf.in stepper Motor 42mm frame 5mm shaft 42J1848-425

Nema 17 2phase 0.44N.m 62ozf.in stepper Motor 42mm frame 5mm shaft 42J1848-425

  • DongGuan, China
  • Oct 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies