Robot Kits, Robot Arms & Legs & Robotics Spare Parts

The average price for current category was $814.03 last month.

There are 5683 ads in this category.

KUKA KPS - 600/20 ESC

Kuka kps - 600/20 esc

  • Saint Marys, Ohio, United States
  • Jan 29th
KUKA KRC2 KPS - 600/20 ESC 00-105-352 This unit came out of a spare KRC2 controller. It is very lightly used. International Buyers - Please Note:  Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
Lloyd LRX-50N Load Cell/Loadcell

Lloyd lrx-50n load cell/loadcell

  • Victoria, BC, Canada
  • Jan 29th
Lloyd LRX- 50N Load Cell/Loadcell Included: (1) Lloyd LRX 50N Load Cell
Lloyd XLC- 500N Load Cell/Loadcell

Lloyd xlc- 500n load cell/loadcell

  • Victoria, BC, Canada
  • Jan 29th
Lloyd XLC- 0500-A1- 500N Load Cell/Loadcell Included:
Brooks PRI DBM2407-V2 Wafer Handling Robot Dual Arm and Controller EDC 2400

Brooks pri dbm2407-v2 wafer handling robot dual arm and controller edc 2400

  • Munchen, Germany
  • Jan 29th
Brooks PRI DBM2407-V2 Wafer Handling Robot pn:6-0002-1085-SP DBM Robots Arm Link 17.3" / 7" with Controller EDC 2400 (sealed) pn:6-0001-0351-SP and 3 pc. Controller / Robot cable all tested and working condition (see pictures Eqt32) Information used, this unit is tested and was used for development not i
SPX GSA Tech-Motive CS4100 CS4146 System With T046P012SSQ04 Torque Tool NICE!!

Spx gsa tech-motive cs4100 cs4146 system with t046p012ssq04 torque tool nice!!

  • Petaluma, California, United States
  • Jan 29th
SPX GSA Tech-Motive CS4100 CS4146 System With T046P012SSQ04 Torque Tool NICE!!
Scribbler 2 (S2) Robot - INCLUDES USB2SERIAL ADAPTER & USB CABLE & SERIAL CABLE

Scribbler 2 (s2) robot - includes usb2serial adapter & usb cable & serial cable

  • Denver, Colorado, United States
  • Jan 29th
This Auction is for a Scribbler 2 (S2) Robot - USB Auction includes:- Scribbler 2 Robot- Scribbler 2 Starter Guide- USB to Serial Adapter & Cable- Serial Cable
UP TO 2 PHD 2 FINGER HEAVY-DUTY AIR GRIPPERS GRC251-2-2001

Up to 2 phd 2 finger heavy-duty air grippers grc251-2-2001

  • Rochester, New York, United States
  • Jan 29th
SquareTrade © AP6.0 UP TO 2 PHD 2 FINGER HEAVY-DUTY AIR GRIPPERS GRC251-2-2001 This is an Auction for up to 2 PHD 2 Finger Shurgrip 2" Stroke Parallel Air Gripper, Model # GRC251-2-2001. PLEASE NOTE: Each bid is for ONE Gripper. Features: Full mounting Corrosion Resistant SHURGRIP, Raised Jaw 2.00 (50 mm) Bore
Solar windmill fan model Car Kit C DIY Children Puzzle IQ Gadget Hobby Robotics

Solar windmill fan model car kit c diy children puzzle iq gadget hobby robotics

  • Nanjing , Jiangsu, China
  • Jan 29th
Features For this kit, it Vividly demonstrated the power of the sun, it can convert solar energy into electricity via the solar panels , then the current drive motor rotation, so drive the fan spin up quickly. Size:9*7.5*21cm ( L * W * H ) The item you received will be just the components which could be assembled to be the car shown in the picture and you need to DIY by yourself We will provide you the instruction on how to DIY when you buy it.
Arduino Tracked Robot Tank Kit With Griper And Bluetooth Control! Ready to Run!!

Arduino tracked robot tank kit with griper and bluetooth control! ready to run!!

  • corfu, corfu, Greece
  • Jan 29th
Arduino Tracked Robot Tank Kit With Griper And Bluetooth Control! Ready to Run!! Package includes:1 x Arduino Uno1 x L298 H-bridge1 x Complete 3d printed (ABS) tracked chassis 2 x Geared motors1 x Gripper arm module with servos!3 x Mini Servos 1 x Arduino Protoboard Shield1 x Bluetooth Module
Janome JR 2200N 2203N Mini XYZ Soldering/Dispensing Robot w/Teach Pendant

Janome jr 2200n 2203n mini xyz soldering/dispensing robot w/teach pendant

  • Saint Paul, Minnesota, United States
  • Jan 29th
Janome JR 2200N 2203N Mini XYZ Soldering/Dispensing Robot Includes Teach pendant and Dispensing tool as pictured 200mm x 200mm x 50mm reach with 0.005mm repeatability! This was pulled from a working setup. We were able to program a short routine and run the program.
Robohand robot arm RR-36-180 , 10" radius

Robohand robot arm rr-36-180 , 10" radius

  • United States
  • Jan 29th
(one) Robohand RR-36-180 with 10" radius arm , (1) linear actuator , Origa type RS , 2 1/2 " travel , (1) SMC pneumatic rotary actuator , NCRB1BW20-90SE , used . $20 shipping in the continental U.S. You can send text messages to my cellphone at 9374165497@vtext.com D-11187 , 88 If you have any questions, please email me!
ABB 3HAA0001-YT IRB6000 Robot Axis 6 Motor Cable

Abb 3haa0001-yt irb6000 robot axis 6 motor cable

  • St Catharines, Ontario, Canada
  • Jan 29th
ABB IRB6000 Robot Axis 6 Motor Cable Part# 3HAA0001-YT This unit is in excellent condition guaranteed to work. Used for ABB IRB6000 robots. Please contact if you have further questions.
Yaskawa JUSP-ACP35JAA Servopack Servo Drive Inverter Motoman - Used Working

Yaskawa jusp-acp35jaa servopack servo drive inverter motoman - used working

  • Comber, Ontario, Canada
  • Jan 29th
Yaskawa JUSP-ACP35JAA Servopack Servo Drive Inverter Motoman - Used Tested - Removed from Working Unit - Cleaned & Tested "Great Condition" BUYER TO PAY ACTUAL SHIPPING COST WILL PACKAGE FOR FREE WILL PROVIDE QUOTE FOR SHIPPING OR FREE LOCAL PICKUP ANY QUESTION PLEASE CALL PH:519-687-3839, CELL:519-903-5460 - ask for ALF
ABB 3HAA0001-AE IRB6400 Robot Shims (Set of 4)

Abb 3haa0001-ae irb6400 robot shims (set of 4)

  • St Catharines, Ontario, Canada
  • Jan 29th
ABB IRB6400 Robot Shims (Set of 4) Part# 3HAA0001-AE These units are in excellent condition guaranteed to work. Used for ABB IRB6400 Robots. Please contact if you have further questions.
Yaskawa Motoman CPS-18FB MRC Robot Power Supply

Yaskawa motoman cps-18fb mrc robot power supply

  • St Catharines, Ontario, Canada
  • Jan 29th
Yaskawa Motoman MRC Power Supply Part# CPS-18FB This part is in perfect condition, tested and guaranteed to work. Used for Yaskawa Motoman MRC Robot Controllers. Please contact if you have further questions.
New 50 styles Plastic Gears All The Module 0.5 Robot Parts for DIY Necessary

New 50 styles plastic gears all the module 0.5 robot parts for diy necessary

  • ShenZhen, GD, China
  • Jan 29th
The gear diameter can be calculated using the formula (teeth + 2) * modulus = diameter of gear. Please note that some gear styles have a tight match (0.05mm smaller than standard), while others have a loose match (0.05mm larger than standard). Please contact us before returning the item.

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies