STARRETT 1202-6 0-6" .001 DIAL CALIPER Quick, accurate measurement of OD, ID and depth Hardened stainless steel bar, measuring surfaces, rack & gear Covered rack depth rod Sharp, clear dial graduations of .001" w/.100" per rev. Sharp, black graduations on the satin finished bar.
New 0.001mm dial indicator measure from 0-12.7 mm inch and metric available luc bak hole 6.35mm with 5pcs extention bar coulde be measure heigh to 50mm Include 5 different shape indicator tip, standard, cone shape, straight rod style Return policy : You may return the product within 30 d
SHAFT ALIGNMENT DIAL INDICATOR ROLLER CHAIN JIG MILLWRIGHT & MAINTENANCE IT'S ON EVERY MILLWRIGHT AND MAINTENANCE TOOL LIST A TRUE CRAFTSMAN MUST HAVE AT LEAST ONE IN THEIR TOOLBOX NOTE "TWO ARE NEEDED FOR REVERSE AND NEW METHOD OF ALIGNMENT PROCUDURES OVER 35 YEARS OF EXPERIENCE WENT INTO THIS ONE 6061 AIRCRAFT ALUMINUM
Nice condition universal indicator set by CDI Chicago. Indicator still has lens protector plastic on it. One stand rod has some light rust but that is the only thing I see wrong.
NBS 802-830 Standard Carbon, Iron and Low Alloy Steel Samples All my stock of carbon steel, of low-alloy steels and one of ingot iron of this size are listed here; there are no others available and no possibility of any back orders. The National Institute of Standards and Technology (NIST), formerly the National Bureau of Standards (NBS), is part of
For sale is a metric micrometer checking kit from a closed industrial setting. It includes 25, 30, 35, 40, and 50mm rings and a ringmaster 1.3125 ring. Also included is a 1" rod and a micrometer with a bar attached as seen in the pic.
Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.
Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1912, 1918: Volume 4, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, Bradely, Ill., 2011. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-398-5.
Roper Whitney's Connecticut hand brakes are designed and built for long service and accurate bending. Welded steel plate construction and heavy truss rods and braces provide strength and durability. With much more substantial steel side plates than other domestically made units, these brakes have the rigidity required for upper beam adjustment without the use of wrenches.
This listing is for a vintage hardback book titled Rod, Bar and Wire by Kaiser Aluminum (1956, second printing/first edition). The book is in good to very good condition, considering its age. Cover is in great shape, binding is tight, pages have no damage or writing on them, minor yellowing around page edges, and book has very minor old smell (from age/storage).
Alcoa Aluminum Handbook, copyright 1962. Contains 9 sections: Wrought Alloys, Sheet and Plate, Wire Rod and Bar, Extrusions, Tube and Pipe, Electrical Conductor, Structural Shapes, Forgings, and Casting Alloys. Size is 8 1/2 x 5 1/2 inches, 246 pages.
This listing is for an authentic vintage publication from Kaiser Aluminum. This is Product Information on ROD, BAR AND WIRE. It is copyrighted 1954 and shown as a First Edition.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
