rod pin for sale, brand-new and used.

Here's aLot ofSix (6)CARR LANELatch Clamps Catalog No.:CL-300PA

Specifications

NEW OEM ALLIANZ-JOHNSTON/GOBAL CYLINDER. PART NUMBER 302344 SPS IT IS;(MEASURED WITH A TAPE MEASURE)18-3/4 OVERALL LONG FIXED END; 1/2 PIN HOLE, FROM END TO CENTER OF PIN HOLE IS 3/4, IT IS 3/4 WIDE ROD END; IS CLEVIS STYLE 1/2 PIN HOLES, FROM END TO CENTER OF PIN HOLES I

Used complete tubing vise clamp slide block holder for a Parker 824 manual tubing bender. This i

About us Shipping

Up for sale is (1) NOS Case dozer hydraulic blade lift cylinder, P/N # G109819 .I believe this fits dozer models 1150E,1150G,1150H, and 1155E, but am not 100% certain of this. Item has scuffs and scrapes from handling and a small grinder mark on the tube and screw in cap for unknown reasons ( nothing that will affect the performance of it). There are no nicks or scratches on the cylinder shaft as the pictures show.

Stanley Hardware SP2154 Adjustable Tension Full Surface Screen Door SPring Hinge in Satin Brass Tone Product Features

Double-Acting Tie-Rod Hydraulic Cylinder Clevis Mounting 3-1/4" Bore 8" Stroke

Fuller & Johnson 7hp model K kerosene throttle governed engine. S/N 59981 was shipped on September 20th, 1918 to A.L. Stewart of Blabon North Dakota.

Stunning, restored 3 1/2 horsepower New Way Vertical Hit and Miss Antique engine...Model A, type C.. This was purchased new in Lansing, Michigan, and was used as the drive line on a cream separator.. New rings and spacers, New sleeve, New wrist pin and bushing, New babbit in connecting rod, New belt, New muffler. Gas tank sand blasted and sealed.

Up for sale are ( 2 ) new Parker( series 2H ) 2-1/2" bore X 29" stroke hydraulic cylinders. Items have been tested for leaks and defects at our local hydraulic repair shop and had no issues. I will be happy to combine shipping on multiple items, just send me a destination zip code before checkout and I will figure the shipping charges.

GeoSurgical, LLC will not be able to ship to

Up for sale is a new, unused, Eaton Hydraulics 8" bore X 10" stroke cylinder from military surplus stock. Item weighs 125lbs. Always happy to combine shipping charges as well on multiple items, just send me a destination zip code and I will figure the shipping charges before you check out.

You are bidding on a NEW IN BOX

New 500 foot spool Southwire 10 AWG THHN THWN stranded wire white. Boxed shipping weight is about 20 pounds and I will carefully package and ship it promptly.

Brand new store store display Palmer Wahl brand leak testing gauge. Part number 40KBDLA15 3/4" MNPT (Ref. Grainger #6PEZ7 for item specifics) Large easy to read 4" dual dial face 0-15 PSI and 0-30 Inches of mercury Phosphor bronze diaphragm brass socket and Schrader air valve and cap and adjustable red reset pointer for leak off indication.

Pulled from a stainless steel Shuttleworth machine, each rod measures 20 inches long by 1/4th wide. Rollers and black spacers are included. You will receive all three rods, rollers a d spacers shown.