Rohde & Schwarz FSP40 RF Spectrum Analyzer 9 KHz to 40 GHz, US $28,000.00 – Picture 0

Rohde & Schwarz FSP40 RF Spectrum Analyzer 9 KHz to 40 GHz, US $28,000.00 – Picture 1

Rohde & Schwarz FSP40 RF Spectrum Analyzer 9 KHz to 40 GHz, US $28,000.00 – Picture 2

Rohde & Schwarz FSP40 RF Spectrum Analyzer 9 KHz to 40 GHz, US $28,000.00 – Picture 3

Rohde & Schwarz FSP40 RF Spectrum Analyzer 9 KHz to 40 GHz, US $28,000.00 – Picture 4

Rohde & Schwarz FSP40 RF Spectrum Analyzer 9 KHz to 40 GHz, US $28,000.00 – Picture 5

Rohde & Schwarz FSP40 RF Spectrum Analyzer 9 KHz to 40 GHz, US $28,000.00 – Picture 6

Rohde & Schwarz FSP40 RF Spectrum Analyzer 9 KHz to 40 GHz, US $28,000.00 – Picture 7

Rohde & Schwarz FSP40 RF Spectrum Analyzer 9 KHz to 40 GHz, US $28,000.00 – Picture 8

Rohde & Schwarz FSP40 RF Spectrum Analyzer 9 KHz to 40 GHz, US $28,000.00 – Picture 9

Rohde & Schwarz FSP40 RF Spectrum Analyzer 9 KHz to 40 GHz, US $28,000.00 – Picture 10

Rohde & Schwarz FSP40 RF Spectrum Analyzer 9 KHz to 40 GHz, US $28,000.00 – Picture 11

Rohde & Schwarz Fsp40 Rf Spectrum Analyzer 9 Khz To 40 Ghz

US $28,000.00

Reynoldsburg, Ohio, United States
Mar 2nd

Open on mobile:
QR code

PLEASE READ COMPLETELY BEFORE BIDDING By purchasing this item(s) confirms that you have read and agree to the terms of this listing What you see in these photos is what will be shipped to you. If you have any questions about this item(s), please email me prior to bidding, otherwise buyer holds all responsibility I am not a technician but before I list items, I power test all equipment, check for error codes, messages and inspect for physical damage or inconsistencies. Upon request, I will perform certain checks or run tests on equipment if the proper instruction and/or accessories are needed and available. Please note that I do not refund shipping charges No refunds for incompatibility with buyer’s equipment. Not responsible for passwords left on electronic equipment, because if that’s the way I receive it, that’s the way I sell it. If you have any problem with your purchase, please contact me ASAP through eBay only. Buyer must pay (or make arrangements with me) within 3 days of winning bid, otherwise sale will be cancelled. "SOLD AS IS" All sales are FINAL If for any reason you are not satisfied with your purchase, please contact me before leaving negative feedback. Thank you. Key Features & Specifications Frequency range 20Hz to 3GHz, 7 GHz, 13 GHz, 30 GHz and 40 GHz Resolution bandwidth 1 Hz to 10 MHz Displayed average noise level -155 dBm (1 Hz) Phase noise -113 dB (1 Hz) at 10 kHz Additional filters: Channel filters from 100 Hz to 5 MHz and RRC filters; FFT filters from 1Hz to 30 kHz; EMI bandwidths and quasi-peak detector Total measurement uncertainty 0.5 dB Measurement routines for TOI, ACP(R), OBW, CCDF, APD, etc. as standard Fast ACP in time Specifications Specifications are valid under the following conditions: 15 minutes warm-up time at ambient temperature, specified environmental conditions met, calibration cycle adhered to, and total calibration performed. Data without tolerances: typical values only. Data designated "nominal" applies to design parameters and is not tested. Data designated "? = xx dB" is shown as standard deviation. ,FSP3 ,FSP7 ,FSP13 ,FSP30 ,FSP40 Frequency Frequency range 9 kHz to 3 GHz 9 kHz to 7 GHz 9 kHz to 13.6 GHz 9 kHz to 30 GHz 9 kHz to 40 GHz Frequency resolution 0.01 Hz Internal reference frequency (nominal) Aging per year1) 1) After 30 days of operation. 1 x 10–6 Temperature drift 1 x 10–6 With option ,FSP-B4 (OCXO) Aging per year1) 1 x 10–7 Temperature drift 1 x 10–8 External reference frequency 10 MHz Frequency display with marker or frequency counter Marker resolution span/500 Max. deviation (sweep time >3 x auto sweep time) ±(frequency x reference frequency + 0.5% x span + 10% x resolution bandwidth + 1/2 (last digit)) Frequency counter resolution 0.1 Hz to 10 kHz (selectable) Count accuracy (S/N >25 dB) ±(frequency x reference frequency + 1/2 (last digit)) Frequency span 0 Hz, 10 Hz to 3 GHz 0 Hz, 10 Hz to 7 GHz 0 Hz, 10 Hz to 13.6 GHz 0 Hz, 10 Hz to 30 GHz 0 Hz, 10 Hz to 40 GHz Max. span deviation 0.1% Spectral purity (dBc (1 Hz)) SSB phase noise, f = 500 MHz, for f > 500 MHz see diagrams below Carrier offset 100 Hz <–84, typ.–90 1 kHz <–100, typ.–108 10 kHz <–106, typ. –113 100 kHz2) 2) Valid for span >100 kHz. <–110, typ. –113 1 MHz2) <–120, typ.–125 10 MHz typ.–145 Residual FM f = 500 MHz, RBW 1 kHz, sweep time 100 ms typ. 3 Hz

“Missing handle, has a dent on top, "UNTESTED"”

Brand	Rohde Schwarz
Model	FSP40