+ Post new Ad
Rowe Reel-Type Powered Uncoiler - Used - AM11331, US $12000 – Picture 0
Rowe Reel-Type Powered Uncoiler - Used - AM11331, US $12000 – Picture 1
Rowe Reel-Type Powered Uncoiler - Used - AM11331, US $12000 – Picture 2
Rowe Reel-Type Powered Uncoiler - Used - AM11331, US $12000 – Picture 3
Rowe Reel-Type Powered Uncoiler - Used - AM11331, US $12000 – Picture 0
Rowe Reel-Type Powered Uncoiler - Used - AM11331, US $12000 – Picture 1
Rowe Reel-Type Powered Uncoiler - Used - AM11331, US $12000 – Picture 2
Rowe Reel-Type Powered Uncoiler - Used - AM11331, US $12000 – Picture 3

Rowe Reel-type Powered Uncoiler - Used - Am11331

US $12000

  • Cleveland, Ohio, United States
  • Jun 9th
Open on mobile:
QR code
ROWE Reel-Type Powered Uncoiler - Used - AM11331 Model: 20030 DS/J          Serial: 19170 Capacities: Maximum Coil Weight: 20,000lbs Maximum Coil Outside Diameter: 60” Coil Inside Diameter: Maximum: 20” Minimum: 16” Maximum Coil Width: 30” Powered Expansion Capability Includes: (4) Segment Mandrel Machine Mounted Electrical Controls Pendant Control For Powered Mandrel Expansion 230/460 Volt, 60 Hz, 3 Phase Electrics …Dust Extraction…Fabricating Machinery…Sawing & Cutoff…Tube & Pipe…     This item is on our floor available immediately, subject to prior sale   * Ask as to shipping options  *   DISCOUNTED PRICE|AS PICTURED|LOADED ON TRUCK|FOB CLEVELAND, OHIO If Necessary, Palletizing Fee Not To Exceed $250.00 USD Do not hesitate to call with any further questions and we look forward to doing business with you. ALLSET MACHINE - EBAY DEPARTMENT - 216-433-7171 – www.amindustrialmachinery.com     __New Arrivals Daily!__   Conditions: Used items sold hereunder are neither designed nor manufactured by the seller, and this sale of these items is on an as-is and without any representations or warranties, expressed or implied, of any kind including safety, condition, or quality.  Seller further assumes no responsibility to provide safety devices or equipment necessary for the protection of the user or to comply with applicable governmental laws or requirements.  It is agreed and understood that purchaser assumes this responsibility and the above is an integral part of this sale.  All sales are F.O.B. Cleveland, Ohio unless otherwise specified.

Directions

Similar products from Tools for Fabrication Equipment

Machinist Bronze Wedges Natural Gas Propane Non Sparking Tool W-11 USA ALBR

Machinist Bronze Wedges Natural Gas Propane Non Sparking Tool W-11 USA ALBR

  • Shady Side, Maryland, United States
  • Jun 9th
BRAND NEW SET OF 6 7/8"FINGERS FOR A DI-ACRO # 1 HAND FINGER BRAKE FREE SHIPPING

BRAND NEW SET OF 6 7/8"FINGERS FOR A DI-ACRO # 1 HAND FINGER BRAKE FREE SHIPPING

  • Seekonk, Massachusetts, United States
  • Jun 9th
CNC TUBE TAPER FORMING MACHINE (29032)

CNC TUBE TAPER FORMING MACHINE (29032)

  • Cincinnati, Ohio, United States
  • Jun 9th
Antique Pexto Blow Horn Stake Anvil Tinsmith Blacksmith forge Niagara Tool Works

Antique Pexto Blow Horn Stake Anvil Tinsmith Blacksmith forge Niagara Tool Works

  • Saint Regis Falls, New York, United States
  • Jun 9th
DIACRO

DIACRO

  • Lewisburg, Pennsylvania, United States
  • Jun 9th
punch press

punch press

  • Menominee, Michigan, United States
  • Jun 9th
PEXTO - MANUAL 24" FINGER BRAKE - PX-24-A - METALWORKING - CAST IRON

PEXTO - MANUAL 24" FINGER BRAKE - PX-24-A - METALWORKING - CAST IRON

  • Fairhaven, Massachusetts, United States
  • Jun 9th
Pexto No 561 setting down rotory sheet metal machine tool Nice

Pexto No 561 setting down rotory sheet metal machine tool Nice

  • Lewiston, Idaho, United States
  • Jun 9th
Pexto No 576 small burring rotory sheet metal machine 1867 pat. Cool tool

Pexto No 576 small burring rotory sheet metal machine 1867 pat. Cool tool

  • Lewiston, Idaho, United States
  • Jun 9th
CONRAC PRESSTAKER 020B-SA-500

CONRAC PRESSTAKER 020B-SA-500

  • Joplin, Missouri, United States
  • Jun 9th
1/4" x 10' Amada Model M-3060 Mechanical Shear

1/4" x 10' Amada Model M-3060 Mechanical Shear

  • Kansas City, Missouri, United States
  • Jun 9th
CNC Strippit FC-750 Turret Punch Press

CNC Strippit FC-750 Turret Punch Press

  • Frenchville, Pennsylvania, United States
  • Jun 9th
VINTAGE STEEL STAMPS 1/8" LETTERS A TO Z w/ "&" and "." SYMBOLS - Dovetail Box

VINTAGE STEEL STAMPS 1/8" LETTERS A TO Z w/ "&" and "." SYMBOLS - Dovetail Box

  • East Windsor, Connecticut, United States
  • Jun 9th
DI-ACRO FINGER BRAKE NO.24 S#FB212

DI-ACRO FINGER BRAKE NO.24 S#FB212

  • Chicago, Illinois, United States
  • Jun 9th
New Zephyr Countersink Cages

New Zephyr Countersink Cages

  • Seattle, Washington, United States
  • Jun 9th
SUNEX Model 5250, Manual, 50 Ton H-Frame Press

SUNEX Model 5250, Manual, 50 Ton H-Frame Press

  • Pomona, California, United States
  • Jun 9th
GEKA 100 ton Ironworker Punch Shear Hydrocrop 100SD Lots of Tooling Included!

GEKA 100 ton Ironworker Punch Shear Hydrocrop 100SD Lots of Tooling Included!

  • Chicago, Illinois, United States
  • Jun 9th
165 Ton 144" Bed Haco SRM 165-12-10 NEW PRESS BRAKE, EasyBend Graphics 2D CNC

165 Ton 144" Bed Haco SRM 165-12-10 NEW PRESS BRAKE, EasyBend Graphics 2D CNC

  • Minot, North Dakota, United States
  • Jun 9th
NUGIER 200 TON H FRAME PRESS 50" BETWEEN UPRIGHTS, AIR OPERATED

NUGIER 200 TON H FRAME PRESS 50" BETWEEN UPRIGHTS, AIR OPERATED

  • Pomona, California, United States
  • Jun 9th
WYSONG MECHANICAL POWER SQUARING SHEAR 1052 52" 10 ga (28848)

WYSONG MECHANICAL POWER SQUARING SHEAR 1052 52" 10 ga (28848)

  • Cincinnati, Ohio, United States
  • Jun 9th

People who viewed this item also vieved

TORNOS M4 SWISS SCREW MACHINE CROSS DRILL ATTACHMENT

TORNOS M4 SWISS SCREW MACHINE CROSS DRILL ATTACHMENT

  • Thousand Oaks, California, United States
  • Jan 30th
FETTE 1/2-14 NPTF THREAD ROLLS

FETTE 1/2-14 NPTF THREAD ROLLS

  • Cadiz, Kentucky, United States
  • Jan 30th
FETTE 3/8-24 UNF THREAD ROLLS

FETTE 3/8-24 UNF THREAD ROLLS

  • Cadiz, Kentucky, United States
  • Jan 30th
29.5" Arm 8.25" Column Victor 829 RADIAL DRILL, Spdl Strk 8.25", 6 speeds, 2 HP

29.5" Arm 8.25" Column Victor 829 RADIAL DRILL, Spdl Strk 8.25", 6 speeds, 2 HP

  • Harrison, New Jersey, United States
  • Jan 30th
33.5" Arm 8.25" Column Victor 833 RADIAL DRILL, Spdl Strk 8.25", 6 speeds, 2 HP

33.5" Arm 8.25" Column Victor 833 RADIAL DRILL, Spdl Strk 8.25", 6 speeds, 2 HP

  • Harrison, New Jersey, United States
  • Jan 30th
37.41" Arm 8.25" Column Victor 837 RADIAL DRILL, Spdl Strk 8.25", 6 speeds, 2 HP

37.41" Arm 8.25" Column Victor 837 RADIAL DRILL, Spdl Strk 8.25", 6 speeds, 2 HP

  • Harrison, New Jersey, United States
  • Jan 30th
Wire Diamond Guide Attachment

Wire Diamond Guide Attachment

  • Wilmington, Ohio, United States
  • Jan 30th
Mitsubishi .0305 Diamond Guide Head Only

Mitsubishi .0305 Diamond Guide Head Only

  • Wilmington, Ohio, United States
  • Jan 30th
Mitsubishi .0205 Diamond Guide Head Only

Mitsubishi .0205 Diamond Guide Head Only

  • Wilmington, Ohio, United States
  • Jan 30th
SUNNEN HONE MODEL MBH-1290D, REF.#5564

SUNNEN HONE MODEL MBH-1290D, REF.#5564

  • Warminster, Pennsylvania, United States
  • Jan 30th
Folder Gluer Straps: Bobst,Signature,Jagenburg,International,Post,Brausse parts

Folder Gluer Straps: Bobst,Signature,Jagenburg,International,Post,Brausse parts

  • Grayslake, Illinois, United States
  • Jan 30th
SWECO VIBRATORY FINISHING BOWL

SWECO VIBRATORY FINISHING BOWL

  • Clinton Township, Michigan, United States
  • Jan 30th
6" W 18" L Gallmeyer & Livingston "GRAND RAPIDS" No. 253 SURFACE GRINDER, AUTO I

6" W 18" L Gallmeyer & Livingston "GRAND RAPIDS" No. 253 SURFACE GRINDER, AUTO I

  • Harrison, New Jersey, United States
  • Jan 30th
1.5" Dia. Giddings & Lewis HC DRILL GRINDER, LATE & CLEAN

1.5" Dia. Giddings & Lewis HC DRILL GRINDER, LATE & CLEAN

  • Harrison, New Jersey, United States
  • Jan 30th
14" Swg 72" cc Landis CH OD GRINDER, HYD. Tbl, 14" WHEEL, LIVE/DEAD WKHD.,

14" Swg 72" cc Landis CH OD GRINDER, HYD. Tbl, 14" WHEEL, LIVE/DEAD WKHD.,

  • Harrison, New Jersey, United States
  • Jan 30th
South Bend Gear for 9” and 10K Lathe Quick Change Gearbox #PT624NK1

South Bend Gear for 9” and 10K Lathe Quick Change Gearbox #PT624NK1

  • Unionville, Pennsylvania, United States
  • Jan 30th
South Bend Gear for 9” and 10K Lathe Quick Change Gearbox #PT621NK1

South Bend Gear for 9” and 10K Lathe Quick Change Gearbox #PT621NK1

  • Unionville, Pennsylvania, United States
  • Jan 30th
South Bend Gear for 9” and 10K Lathe Quick Change Gearbox #PT627NK1

South Bend Gear for 9” and 10K Lathe Quick Change Gearbox #PT627NK1

  • Unionville, Pennsylvania, United States
  • Jan 30th
Ingersoll 2J1E-40R01 4" Indexable Carbide Face Mill, Free Shipping

Ingersoll 2J1E-40R01 4" Indexable Carbide Face Mill, Free Shipping

  • Sun Prairie, Wisconsin, United States
  • Jan 30th
Two (2) Ingersoll "High Pos Plus" 12J1E Indexable End Mill Holders

Two (2) Ingersoll "High Pos Plus" 12J1E Indexable End Mill Holders

  • Sun Prairie, Wisconsin, United States
  • Jan 30th
Ingersoll 5K2H-30R01 (3183681) 4" Indexable Carbide Face Mill, Free Shipping

Ingersoll 5K2H-30R01 (3183681) 4" Indexable Carbide Face Mill, Free Shipping

  • Sun Prairie, Wisconsin, United States
  • Jan 30th
GLEASON INDEX PLATE & CAM FOR A 608 OR 609 ROUGHER OR FINISHER (49 Tooth) #27331

GLEASON INDEX PLATE & CAM FOR A 608 OR 609 ROUGHER OR FINISHER (49 Tooth) #27331

  • Cincinnati, Ohio, United States
  • Jan 30th
GLEASON INDEX PLATE & CAM FOR A 608 OR 609 ROUGHER OR FINISHER (51 Tooth) #27333

GLEASON INDEX PLATE & CAM FOR A 608 OR 609 ROUGHER OR FINISHER (51 Tooth) #27333

  • Cincinnati, Ohio, United States
  • Jan 30th
GLEASON INDEX PLATE & CAM FOR A 608 OR 609 GLEASON GEAR #27329

GLEASON INDEX PLATE & CAM FOR A 608 OR 609 GLEASON GEAR #27329

  • Cincinnati, Ohio, United States
  • Jan 30th
14" ABRASIVE METAL CUTTING WHEELS, 1/8" WIDE, 1" ARBOR

14" ABRASIVE METAL CUTTING WHEELS, 1/8" WIDE, 1" ARBOR

  • Pinellas Park, Florida, United States
  • Jan 30th
Vertical Bandsaw - Model BAV-450

Vertical Bandsaw - Model BAV-450

  • Sterling Heights, Michigan, United States
  • Jan 30th
Eisele,12" Cold Saw 440v VMSIIIPV

Eisele,12" Cold Saw 440v VMSIIIPV

  • Glassboro, New Jersey, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies