rpm max for sale, brand-new and used.

Shipping to Lower 48 States only Technical Specs

Shipping to Lower 48 States only Technical Specs

I am offering a Century Condenser Fan Motor H1051A 1.5 hp 1140 rpm 208-230/460v. This motor is being offered as new 'other' because there are numerous scratches on the motor itself, in addition I will be shipping this to you in a new box (not manufacturer's box). I guaranteed your satisfaction.

Click here to view full size. Full Size Image Click to close full size.

New Dayton 1D167 Direct Drive Blower Motor 1/4 hp 1075 rpm 115 Volt With CapacitorNew Old Stock. New In Box Technical Specs

UP FOR SALE CONDENSER FAN MOTOR , HERE ARE THE SPECS : Motor Type PSC

This listing is for 1 Brand New Dayton 3XE22 DC Motor. The packaging has been opened, but is guaranteed to be brand new. It's brand new in box and includes manual that it normally comes with.

New Old Stock OEM BECKETT A2EA-6528, A2EA6528, 3450 RPM 120 vac, 4 GPH CLEANCUT OIL PUMP ***NO LONGER INCLUDES A DELAY TIMER. IF YOU NEED THE TIMER YOU MUST PURCHASE THE 21887U SEPARATELY*** ***THIS IS THE REPLACEMENT FOR THE A2EA-6520, A2EA6520, A2EA-6527, A2EA6527*** The CleanCut Solenoid Advantage

THIS IS NEW NOT RECONDITIONED FOR SALE IS A NEW IN THE BOX SUNTEC A1VA-7112-6 RIGHTHAND ROTATION 1725 RPM OIL PUMP FOR AN OIL BURNER. PUMP HAS BEEN IN STORAGE AND HAS SOME SURFACE RUST AROUND SHAFT HOUSING AS SEEN IN PICTURES THEBOX IS A LITTLE DIRTY FROM BEING ON TRUCK AND DIRTY HANDS TOUCHING IT….

New - Factory Authorized Distributor - Factory Warranty Authorized Distributor http://www.onlinecomponents.com/datasheet/461895.aspx?p=1

New - Factory Authorized Distributor - Factory Warranty Authorized Distributor http://www.onlinecomponents.com/datasheet/461995.aspx?p=1

More pictures below Variable Speed Hydraulic Supply Unit Eaton Log Deck or Lumber deck, Conveyor Drive, Trailor Deck Drive, Winch & other Complete unit made by HI Power with all original components as a reversing, reversible variable speed drive. Neat, Easy to understand and use. Use the standard shaft 3PH motor on it or Change motor with just 4 bolts and a set screw, to 1PH, single phase, DC or any standard shaft motor, I think it is 1/2"shaft.

Item Description: In-Ground Swimming Pool Pump, Self-Priming, Material Thermoplastic, 1-1/2 HP, 1 Phase, Voltage 115/230, 16.0/8.0 Amps, Inlet/Outlet 1-1/2 In FNPT, Motor Type Capacitor Start, Motor Enclosure ODP, NEMA/IEC Frame 48, Max. Head 92 Ft., Suction Lift 10 Ft., Max. Liquid Temp.

Item Description: Pump, Straight Centrifugal, 5 HP, 3 Phase, Voltage 230/460, 13.7/6.80 Amps, 60 Hz, Inlet 2 In., Outlet 1 1/2 In., Motor Enclosure TEFC, Motor RPM 3500, Service Factor 1.0, Impeller Material Stainless Steel, Housing Material Stainless Steel, Seal Type Mechanical, Max. Head 111.0 Ft., Inlet Pressure 100 PSI, Impeller Type Enclosed, Max. Dia.

GE 60 hp TEFC Encl Double End C-Face Electric Motor General Electric GE 60 hp TEFC Encl Double End C-Face Electric Motor, 1190 rpm, Frame 404TSCZ (replacement used stock motor for Prince die cast machine hydraulic system) Extra Severe Duty AC Motor - Energy Saver X$D Series

GE 100 hp TEFC Encl Double End C-Face Electric Motor GE Motors & Industrial Systems 100 hp TEFC Encl Double End C-Face Electric Motor, 1190 rpm, Frame 444TSCZ (replacement used stock motor for Prince 1200-Ton die cast machine hydraulic system) Energy Saver XSD Extra Severe Duty AC Motor

Wholesale Direct Auto Parts

Warehouse Closing Down Sale! Retail Price: $820 DC Motor, Permanent Magnet, Totally Enclosed Fan-Cooled, 1 HP, 1725 Nameplate RPM, Voltage 180VDC, Full Load Amps 5.3NEMA/IEC Frame 56C, Mounting Face/Base, Thermal Protection None, H Insulation Class, Bearings Ball, Ambient Temperature 40 Degrees C, CW/CCW Rotation, Overall Length 16-5/8 In.Shaft Dia. 5/8 In., Shaft Length 1-7/8 In.RPM Range 1400-1800, Features Removable Base, UL Recognized (E47479) 180VDC Permanent Magnet Motors

Centrifugal pump, 3510 1 1/2x2x5QT Quantek, SS, 7 1/2hp Bell Gossett This is a high speed pump made by Bell & Gossett, model 3510 1 1/2x2x50T, with a Quantek pump head. Centrifugal end suction type 175 psi max 3450 RPM Heavy duty welded frame Pump: Quantek stainless steel head Inlet port: Threaded 1 1/2" Outlet port: Threaded 2" Motor: Baldor 7 1/2 hp 208-230/460VAC 3 phase 1800 rpm Specifications:

DETAILS: narrow face. For hard-to-reach areas; primarily for weld cleaning.. Wire Material=Steel Dia.=6 7/8 in Wire Size=0.0200 in Arbor Thread - TPI or Pitch=5/8 in - 11 UNC No.