sae 4 port for sale, brand-new and used.

VICKERS V20 1P8P 1B11 / EATON 372639-2 VICKERS V20 1P8P 1B11-

These were purchased as samples for a project that did not take off, and they have been sitting in our parts room. They are in good, like new, condition. Here is specs on them: Disp.ment = 3.5 Max Pressure= P1 250, P2 270, P3 290 Max Speed = 5000 Min.

Ross / TRW Hydraulic Roller Vane Torque Motor MAB 32 Manufacturer: Ross / TRW Part Number MAB - 32 - 2065 - A1 The MAB Series torqmotor is simple and reliable. The design requires fewer parts and has only five seals, compared to as many as fourteen in other motors. The MAB maintains speed under any pressure within its design limit.

Brand New Reliable Hydraulic Pole Saw LR-88.5 Comes with Reliable brand 14" bar, and chain only. Info from reliable-equip.com LR-88.5 HYDRAULIC LONG REACH CHAIN SAW

HYDRAULIC POWER UNIT: 12V DC, SINGLE ACTING, SOLENOID OPERATED, 1.3 FLOW

The Concentric 12V DC power unit is used in applications where control valves are mounted externally away from power units. Flow and pressure to manifolds allow usage in many applications. Return port for returning oil back to tank.

I bought this Greenlee Fairmont 86" hydraulic pole pruner along with 62.5 pole saw (check my other auctions) and a 88.5" pole saw( check my other auctions) all together when I purchased a 60' bucket truck from a municipal fleet. I was told it was in good working order and used daily. I have never actually used it but see no reason why it wouldn't work, I used to buy a lot of equipment from this city and never had an issue.

NEW OEM Eaton / Char-Lynn Hydraulic MotorPart # 104-1039-006 This hydraulic motor was obtained from a mis-routed / lost / recovered shipping incident. Absolutely new OEM in factory box that is distressed but secure as shown in pictures. Current date code of 4415 (Week 44 of 2015).

Parker - 4.1 GPM, 7/8-14 UNF-2B SAE Inlet Size, 2,500 RPM, 1/2 Inch Shaft Diameter, SAE AA Mount, Hydraulic Gear Pump 4.07 GPM at 1,800 RPM, 8.14 GPM at 3,600 RPM, 2,500 psi Max Working Pressure, 7/8-14 SAE Port Size

FEATURES Forged brass manifold with exclusive lifetime warranty Die cast, anodized aluminum, oil bath crankcase

FEATURES Forged brass manifold with exclusive lifetime warranty Die cast, anodized aluminum, oil bath crankcase

Hydraulic Motor, 3.6 Displacement (Cu. In./Rev.) Pressure Rating (PSI) 2500, Shaft Type Keyed, 7/8 - 14 SAE Port Thread, SAE O-Ring Port Type, Min. Oil Viscosity 50 SUS, Max.

NEW CONDITION FREE SHIPPING Technical Specs Item Hydraulic Cylinder Type Double Acting Welded Style Bore Dia. (In.) 4 Stroke (In.) 36

Three spool hydraulic 4 way, 3 position directional control valve, lever actuated, tandem center (pressure open to tank with ports A & B blocked in the center position). Tandem center spools are primarily used with double acting cylinders. Spring centered (spool will return to neutral when lever is released).

Three spool hydraulic 4 way, 3 position directional control valve, lever actuated. Two tandem spools ( pressure open to tank with ports A & B blocked in the center position) and one motor or float spool (ports A & B open to tank with pressure blocked in the center position). Can be used in a circuit with two double acting cylinders and one hydraulic motor.

Three spool hydraulic 4 way, 3 position directional control valve, lever actuated, tandem center (pressure open to tank with ports A & B blocked in the center postion). Tandem center spools are primarily used with double acting cylinders. Detent centered (spool will remain in position until manually shifted).

This is not the exact picture of the pump, please pay attention to the part number. FEATURES: SAE J609 flange for direct couple to gasoline engines Set screw for key way Oversized bearings Longer life low and high pressure seals Forged brass manifold with exclusive lifetime warranty SPECIFICATIONS: Triplex Plunger Pump Maximum Volume: 3.0 GPM