You are looking at a NEW never installed or used NEW Datcon 56181 40 Volt DC Hour Meter Super G-70 Model 771 4/40. This is for 40 volts. What you see in the photos IS what I will be sending to you.
Good Used Fully Functional HP8120-1083 10' Cable for the 432A RF Power MeterExcellent Condition/Wiggle Tested ******************* READ BELOW ***************** Sold AS-ISAsk any questions before you buy pleaseNo Returns
1920-30's Westinghouse Watthour meter type OB 10 amp 115 volt. This is for a 2 wire connection. This meter is complete, the glass is not chipped or cracked but does have a clam under one of the wing nuts.
The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.
Rental option as well for only 300$ a month. has 3 options. : 30 hz coverage, external mixing signal ID function and 2nd if output This is a 30 hz to 26.5 ghz hp spectrum analyzer , but with the optional mixers that can be supplied for 700$, you can achieve 50ghz + testing!
I have another unit for 400$ more w / OPTIONS 7 AND 8 which are 7: digitzed fast time domain sweeps useful for zero spans and high resolution bandwidth amplitude accuracy and faster sweeps 8: and signal ID for external mixing it isolates the true signal of the input and removes the spurious non wanted signals you get with external mixing..
I also have another 8560e for 800$ less that comes with a partial cal. everything measures dead on and works perfectly except the avg noise floor is about 1-2 db over spec on the high band (perfectly within spec on the 30 hz to 2.9 ghz range). if you need a good budget analyzer then ask about that one !
Rental option as well for only 200$ a month. Also I can have the phase noise or spurious noise measurements installed on a free mass memory module before shipment for no extra cost! thats an 800 $ value !
COMES WITH OPTION 7 : Digitized fast time domain sweeps (FAST ADC)aka faster zero span sweep This is a 30 hz to 6.5 ghz hp spectrum analyzer , but with the optional mixers from someone else, you can achieve 40ghz + testing! or even up to 110 ghz with other mixers this is a steal! you wont beat this price!
this unit goes up to 26.9 ghz thanks to the option 26 it has installed which is a very valuable and high demand option. it increases the signal to noise ratio and gives it about 7 db lower noise floor past 22 ghz. and the amplitude accuracy is dead on with the option.
K-Type Thermocouple TC-1 for Digital Thermometer - Set of 2 thermocouples, each 3 ft long - -58 to 399°F (-50 to 200°C) NEW: Lower price, fast shipping from St. Paul, Minnesota This is a reliable wire thermocouple TC-1 with a K-Type sensor. The sensor is at the tip of a 3ft long wire probe, which has a green plastic coating.
K-Type Thermocouple TC-1 for Digital Thermometer - Set of 5 thermocouples, each 3 ft long - -58 to 399°F (-50 to 200°C) NEW: Lower price, fast shipping from St. Paul, Minnesota This is a reliable wire thermocouple TC-1 with a K-Type sensor. The sensor is at the tip of a 3ft long wire probe, which has a green plastic coating.
K-Type Thermocouple TC-1 for Digital Thermometer - Set of 10 thermocouples, each 3 ft long - -58 to 399°F (-50 to 200°C) NEW: Lower price, fast shipping from St. Paul, Minnesota This is a reliable wire thermocouple TC-1 with a K-Type sensor. The sensor is at the tip of a 3ft long wire probe, which has a green plastic coating.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.