screw in knob for sale, brand-new and used.

Electro Switch Corp. 122105LA Rotary Switch 5930010121335 - New

Pulled from used equipment, set of 5 pointer knobs are made of lightweight black plastic with a white dot and indented groove along the edge to serve as pointer. They measure 3/4" in diameter x 2/3" tall and are spline style for 1/4" shaft. Not a set screw type knob.

Offered is a new spindle head adjustment locking Knob / lever that came with a New Hermes Engraving Machine we sold on Ebay.     The plastic head on this is approx. 1 3/8" long, the threaded screw is 1" long by about 3/16" .

INCLUDES:(1) Perlick Perl Draft Beer Faucet - 650SS - Flow Control - 304 STAINLESS STEEL(1) 4" Shank for Draft Beer System - STAINLESS STEEL(1) Faucet Handle Knob - Black Plastic(1) Hex Nut(1) Screw Clamp(1) Black Rubber Washer(1) 3/16" STAINLESS STEEL Tail Piece When it comes to draft beer faucets, Perlick does it better than anyone, and this flow control model proves it.

THIS ITEM IS A KNOB FOR 3/16" SHAFTS. BLACK WITH ALUMINUM INSERT APPROX. DIM: 15/16" OD X 3/4" HEIGH 1 SET SCREW These are for an unusual size shaft, but you may have or run across a 3/16" device and here is the knob for it.

Features Quick Acting Style Saves time where knob must be completely removed from stud member. Knob can be slid along length of stud. Tilt to engage threads.

Features Quick Acting Style Saves time where knob must be completely removed from stud member. Knob can be slid along length of stud. Tilt to engage threads.

These are new 8 lobe knobs from a bulk container - you are purchasing a quantity of twelve (12). Each knob is approx 2-3/8" diameter overall with a non-threaded brass center that is 3/8" in diameter. Knob is secured to your spindle/stem with a set screw (set screw not included, but readily available) - knobs are not marked, but appear to be made by Elesa - they are of very high quality.

These are new 8 lobe knobs from a bulk container. Each knob is approx 2-3/8" diameter overall with a non-threaded brass center that is 3/8" in diameter. Knob is secured to your spindle/stem with a set screw (set screw not included, but readily available) - knobs are not marked, but appear to be made by Elesa - they are of very high quality.

THIS ITEM IS FOR 1 (one), SIFAM/SELCO COLLET KNOB WITH NUT COVER, GREY. SIFAM P/N: SN110-125 GREY SHAFT: 1/8" (.125" or 3.175 mm) DIM: 14.2 MM (9/16") at BASE 3/8" OD at TOP 17.2 MM (11

FOR SALE IS A BRAND NEW ELECTROSWITCH ROTARY SWITCH. THIS MILITARY SURPLUS ITEM HAS A PART NUMBER OF 21204A AND AN NSN OF 5930001061437. THE SPECIFICATIONS ARE AS FOLLOWS:

The Lotoons Store 6mm Hole 15mm Top Potentiometer Turn Counting Dia Ro

One control knob with metal pointer for the Hickok 532, 533 & 600, includes set screw, no cracks, chips or breaks Don't forget to check out my other items, always great items for the collector & hobbyist priced to sell. READ THE FINE PRINT TO ENSURE A SMOOTH TRANSACTION If it's not pictured in this listing or stated in the description above it is not included, whatever "IT" may be.

Thermostat Knob PN: 200602 Part ONLY from/for BA-EZ27 Roll Laminator Please read item's description before making your purchase. Description: You will receive the thermostat knob pictured as it is pictured ONLY. Absolutely nothing else is included.

WTH118 47K ohm Single Turn Rotary Linear Taper Carbon Potentiometer Pot w Knob Features: 47K ohm, 2W Rated Power, 4 Terminals, Single Turn, Carbon Taper Potentiometer with black knob cap. Application: Adjust Timer, Speed, Temperature.

One Hickok 100 to 0 metal skirt scale knob, note the metal skirt is flat, pulled from a model 534, belived to be the same as used on the 532 and many 533 tube testers, the skirt measures 1 15/16" across, the knob and skirt show some minor scratch & scuff marks, lettering is good - see pics, set screw included. Don't forget to check out my other items, always great items for the collector & hobbyist priced to sell. READ THE FINE PRINT TO ENSURE A SMOOTH TRANSACTION If it's not picture

THIS ITEM IS FOR 1 (one), SIFAM/SELCO COLLET KNOB WITH NUT COVER. SHAFT: 1/8" (.125" or 3.175 mm) DIM: 14.2 MM (9/16") at BASE 3/8" OD at TOP 17.2 MM (11/16") HEIGHT SHAFT DEPTH: approx. 3/8"D MAXIMUM **&