select a spring for sale, brand-new and used.

50 Sockets for 10mm Screw Base Bulb Fits all bulbs with an E10 base (screw base that is 10mm in diameter), such as the #222 bulb For additional specifications, please review the item specifications. Specifications

Specifications Mounting: Through-Hole

Wired Socket for Wedge Bulbs Socket for W2.1x9.5d bulbs, such as #168, #194, #555, #906, #912 and many others. For additional specifications, please review the item specifications. Specifications

Slide Swich 4P3T For PCB mounting. Specifications Contacts: 4P3T

One Snap-In Rocker Switch, DPDT Rectangular, 4 Amp @ 125 VAC or 2 Amp @ 250 VAC. See specifications for additional details. Specifications

63 pcs PCB Mount Rocker Switch (On/Off) Rocker switch with IP67 protection rating. The switch has 3 pins total, 2 for the on/off electrical connection, and a third prong that provides additional mounting strength to protect the circuit board / solder joints. Available in packs of 3, 63 and 315

315 pcs PCB Mount Rocker Switch (On/Off) Rocker switch with IP67 protection rating. The switch has 3 pins total, 2 for the on/off electrical connection, and a third prong that provides additional mounting strength to protect the circuit board / solder joints. Available in packs of 3, 63 and 315

3 pcs PCB Mount Rocker Switch (On/Off) Rocker switch with IP67 protection rating. The switch has 3 pins total, 2 for the on/off electrical connection, and a third prong that provides additional mounting strength to protect the circuit board / solder joints. Available in packs of 3, 63 and 315

Bourns Rotary Encoder This 3-pin encoder produces a quadrature signal at the A and B channels to allow decoding of the rotational shaft movement. The internal detents are at 15 degree angles, for a total of 24 signals per revolution. There are no end-stops, so the encoder can be continuously rotated.

4 Micro switches, with Lever Dimensions shown exclude lever and pins See specifications for additional details. Specifications Contac

Wedge bulb socket High quality toggle switch, panel mount. Mounting Hardware (2 nuts, serrated washer and anti-rotation clip) included Specifications

Inductive Telephone Recording Adapter This device is an inductive 'microphone', it records telephone conversations by means of inductive coupling. That means it picks up the magnetic field created by your phone's speaker or transformer; both sides of the conversation are transmitted into your recording device. It works on most (but not all) regular phones, and some cell phones.

Specifications Modular Type: RJ11 (6P4C)

RJ11 Splitter (1 Plug, 2 Sockets) One RJ11 plug split to two RJ11 sockets in a splitter/coupler configuration. 6P4C (For 6-position RJ11 plug, 4 conductors wired thru). A similar part (RJ11TRI) is available with3 sockets and without a plug.

RJ11 Splitter (3 Sockets) Three RJ11 sockets in a splitter/coupler configuration. 6P4C (For 6-position RJ11 plug, 4 conductors wired thru). A similar part (RJ11Y) is available with 1 plug and 2 sockets.

RJ11 (Line) Cord, 25 feet This is a standard cord that connects your phone to the wall. The plugs have 6 positions (slots), with the center 4 positions populated (6P4C) with brass contacts. Specifications

RJ11 Dual-Line Splitter (1 Plug, Sockets) This adapter splits a 2-line setup (i.e. a wall jack where a single outlet has 2 lines) into two separate outlets (L1, L2) as well as maintaining a third outlet in the original configuration (L1+L2). Some 2-line phones have two separate sockets, one for each line.