This auction is for a Quantity of 4 Eaton Cutler Hammer Plug-In Relays, Part Number D2PR23T1, Series A2. These Relays have DPDT contacts and 24VDC Coils. The relays are in individual boxes.
This auction is for an Eagle Signal Timer; Part Number BR17A603. This is an electromechanical timer with a range of 0-5 minutes. It is powered by 120VAC.
This auction is for an Eagle Signal Timer; Part Number BR25A6. This is an electromechanical timer with a range of 0-60 seconds. It is powered by 120VAC.
This auction is for an Eaton Inductive Global Series Proximity Sensor; Part Number E57-30GU15-C. This sensor has a 30mm metal housing, N.O. NPN 3-Wire Output, Unshielded Sensing Head, Attached Cable, and operates off of 10-30VDC Power.
This auction is for a Balluff Inductive Proximity Sensor; Part Number BES 516-543-S4-H. This sensor has a 12mm metal housing, N.C. Output, Flush Head, 2mm Sensing Distance, a M12 Quick Disconnect connector, and operates off of 10-55VDC Power.
This auction is for a Balluff Inductive Proximity Sensor; Part Number BES 517-3036-I02-C-S4. This sensor has a Plastic Housing, N.O. Output, 10mm Sensing Distance, a M12 Quick Disconnect connector, and operates off of 10-30VDC Power.
This auction is for a Siemens BERO Capacitive Proximity Sensor; Part Number 3SG3135-0NR42. I don't know anything about this sensor, but it is very old and obsolete. Please buy this only if you know it is right for you.
This auction is for a Siemens BERO Proximity Sensor; Part Number 3SG3232-0AS11. I think it is an Inductive Sensor but I am not sure. I don't know anything else about this sensor, but it is very old and obsolete.
This auction is for a Siemens BERO Capacitive Proximity Sensor; Part Number 3SG3135-0NR41. I don't know anything about this sensor, but it is very old and obsolete. Please buy this only if you know it is right for you.
This auction is for a Balluff Inductive Proximity Sensor; Part Number BES 516-209-S27-E. This sensor has a 12mm metal housing, N.O. Output, Non-Flush Head, 4mm Sensing Distance, an M12 Quick Disconnect connector, and operates off of 20-250V AC/DC Power.
This auction is for an Eaton Cutler-Hammer Amber Indicating Light; part number E22H9X4. The Light Unit in the package is part number E22D. It is described as "Direct Voltage Light Unit Without Bulb".
This auction is for an Eaton Cutler-Hammer White Indicating Light; part number E22H5X4. This Light is 22mm (hole size) and has a White Lens. I includes a Full Voltage 24V AC/DC Light Module with an Incandescent Bulb.
This auction is for a Bag of 32 Eaton Cutler-Hammer Blank Legend Plates; part number E22NSP76. These Legend Plates White with Silver field. They are for the E22 series of pilot devices.
This auction is for a Bag of 10 Eaton Cutler-Hammer Metal Legend Plates; part number E22NS51. The engraving area of these Legend Plates is Silver with Black letters and it says HAND OFF AUTO. They are for the E22 series of 22mm pilot devices.
This auction is for a Lot (partial bag) of 8 Eaton Cutler-Hammer Metal Legend Plates; part number E22NS34. The engraving area of these Legend Plates is Silver with Black letters and they say "STOP". The bottom portion of the plate is Red.
This auction is for a Bag of 10 Eaton Cutler-Hammer Metal Legend Plates; part number E22NS22. The engraving area of these Legend Plates is Silver with Black letters and they say "LOW". They are for the E22 series of 22mm pilot devices.
This auction is for an Eaton Cutler-Hammer Extended Illuminated Pushbutton, part number E22TB2X4B. This is a plastic, 22mm (hole size) light. It has an Red Lens.
This auction is for a Eaton Cutler-Hammer Blue Flush Pushbutton with an Extension Rod; part number E22PB6l. This is a plastic, 22mm (hole size) pushbutton. This Pushbutton has some type of Extension Rod with it but I am not familiar with it's usage.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
