service saddle for sale, brand-new and used.

1000 FEET ALUMINUM MC 10/2 WITH GROUND 1000' 10/2 With Ground Metal Clad Cable Aluminum Armor Solid Wire Durable Cable

1000 FEET ALUMINUM MC 12/2 WITH GROUND 1000' 12/2 With Ground Metal Clad Cable Aluminum Armor Solid Wire Durable Cable

1000 FEET ALUMINUM MC LITE 12/2 WITH GROUND 1000' 12/2 With Ground Metal Clad Cable Aluminum Armor Solid Wire Durable Cable

This auction is for a MTE 3 Phase Line/Load Reactor rated for 55A, 480VAC; part number RL-00503. I know very little about this type of device, so please know if this product will work for you before purchasing.

This auction is for an Emerson/Control Techniques I/O Board for EP Series Drives, Part Number STI-24IO. This is a screw terminal Interface Board that plugs directly into I/O connector J3 on an EP drive. 15 Input and 8 Output lines are labeled and have LEDs for easy field wiring and troubleshooting.

This auction is for an Emerson/Control Techniques Motor Power & Brake Cable, Part Number PBBGKA015. Emerson's literature says that you can use it with their Unimotor HD, Unimotor FM, and NT (EBxx and EOxx) motors; and their Epsilon EP and MDS Drives. The cable is 15 Meters long.

This auction is for an Emerson/Control Techniques Cable, Part Number ECSC-015. It is a Power and Feedback cable designed to go between a Bulkhead Connector and a DX Series Motor. And I believe it is only compatible with the FX-208 Drive.

This auction is for an Emerson/Control Techniques Standard Duty Motor Power Extension Cable, Part Number CMDCS-015. This cable gets connected to a Bulkhead Connector on one end and a motor on the other end. Emerson's literature says that you can connect to their NT, MG, and MH series motors from a PTB-16-8 Bulkhead Connector.

This auction is for an Emerson/Control Techniques Encoder Cable, Part Number SNC-ENC-SM-010. This cable is used to connect a SCSLD style Encoder to a SM-UNI Encoder Plus Module. It is 10' long.

This auction is for an Emerson/Control Techniques Motor Feedback Extension Cable, Part Number CFOCS-015. This cable gets connected to a Bulkhead Connector on one end and a motor on the other end. Emerson's literature says that you can connect to their NT, MG, and MH series motors from a PTB-16-23 Bulkhead Connector.

This auction is for an Emerson/Control Techniques Motor Brake Cable, Part Number CBMS-025. Emerson's literature says that you can use it with their NT, MG, and MH series motors. The cable is 25' long.

This auction is for an Eaton Electronic Manual Motor Protector, part number XTPE032BCA. It has an Overload Release of 8-32A, the frame size is 45mm, and it's Trip Type is Advanced (SmartWire-DT).

This auction is for an Eaton Electronic Manual Motor Protector, part number XTPE012BCA. It has an Overload Release of 3-12A, the frame size is 45mm, and it's Trip Type is Advanced (SmartWire-DT).

This auction is for an Eaton Electronic Manual Motor Protector, part number XTPE032BCS. It has an Overload Release of 8-32A, the frame size is 45mm, and it's Trip Type is Standard.

This auction is for a Red Lion Apollo Current-Loop Indicator without Excitation, Part Number APLCL400. This meter is powered by 115VAC. The box is still sealed, so I did not take a picture of the actual item.

This auction is for an Eaton IQ Series Energy Meter; Part Number IQ250MA65100. This is an Energy Meter that is powered by 94-265VAC/DC, 60Hz. It's Current Input is 5A Secondary.

This auction is for an Eaton Ambassador Series Strider Speed Controller; Part Number 57401-400. it is powered by 115VAC, 60Hz. I do not know anything about the usage of this controller; so I can not provide any additional details.

This auction is for a Red Lion ADI Intelligent Alphanumeric Display, Part Number ADI4Y11A. This is a 2 Line x 20 Character Message Display. The display is Yellow-Green Positive Image.

This auction is for a Parker CTC Field Upgrade Expansion Kit for PowerStation Units; part number EXP-2100. This Expansion Kit will add 3 Full Length PCI slots to a PowerStation Unit. According to a piece of CTC I found, this kit can be used on PowerStation model numbers that begin with PS, PX, or PC

This auction is for a Parker CTC 256KB CMOS RAM Module for PowerStation Units; part number RAM-7002. This is an old product and I don't know what Powerstation models this RAM module will work with, so please be sure that it is the right thing for you. The box is sealed, so I did not take a picture of the actual item.