This auction is for a Partial Box of 4 Littelfuse Time Delay Fuses With Indicator, Part Number JTD 40 ID. This is a Class J time delay fuse with blown fuse indication, 40A, 600VAC. The box shows some shelf wear.
This auction is for a Mixed Lot of 22 Buss FNQ Time Delay Fuses. Here are the part numbers and quantities: FNQ 8 (7), FNQ 12 (4), FNQ 25 (6), FNQ 30 (5). They are time delay fuses, 500VAC rating.
This auction is for a MTE Wall Mount Box; part number 16CE4. It can be used to wall mount the following MTE products: RL-002XX, RL-004XX, RL-008XX, RL-012XX, RL-01801, RL-01802. The dimensions of the box are 8" x 8" x 6" deep.
This auction is for a MTE 3 Phase Line/Load Reactor rated for 55A, 480VAC; part number RL-00503. I know very little about this type of device, so please know if this product will work for you before purchasing.
This auction is for an Emerson/Control Techniques I/O Board for EP Series Drives, Part Number STI-24IO. This is a screw terminal Interface Board that plugs directly into I/O connector J3 on an EP drive. 15 Input and 8 Output lines are labeled and have LEDs for easy field wiring and troubleshooting.
This auction is for an Emerson/Control Techniques Through-the-Wall Bulkhead Connector, Part Number PTB-16-23. This bulkhead connector can be used for Feedback Cables. Based on Emerson literature, this connector should work with Feedback Cables associated with NT, MG, and MH motors.
This auction is for an Emerson/Control Techniques Motor Power & Brake Cable, Part Number PBBGKA015. Emerson's literature says that you can use it with their Unimotor HD, Unimotor FM, and NT (EBxx and EOxx) motors; and their Epsilon EP and MDS Drives. The cable is 15 Meters long.
This auction is for an Emerson/Control Techniques Cable, Part Number ECSC-015. It is a Power and Feedback cable designed to go between a Bulkhead Connector and a DX Series Motor. And I believe it is only compatible with the FX-208 Drive.
This auction is for an Emerson/Control Techniques Cable, Part Number AX4-MX-010. This is a Command/Feedback cable that connects an Emerson Axima Controller to their MX Series Servo Drives. It is 10' long.
This auction is for an Emerson/Control Techniques Cable, Part Number SSC-003. This cable is used with Emerson's older FX Series drives. This is a PCM Module to PCM Module connection cable.
This auction is for an Emerson/Control Techniques Cable, Part Number AX4-MX-005. This is a Command/Feedback cable that connects an Emerson Axima Controller to their MX Series Drives. It is 5' long.
This auction is for an Emerson/Control Techniques Motor Power & Feedback Cable, Part Number ECS-001.5. This cable is used with Emerson's older FX Series drives. The cable has a connector at the drive end and at the motor end.
This auction is for an Emerson/Control Techniques Motor Power Cable, Part Number PSBAAA005. Emerson's literature says that this cable is for non-braked 75-142mm Frame Size FM and Unimotors. The cable is 5 Meters long.
This auction is for an Emerson/Control Techniques Encoder Feedback Converter Module - Epsilon EP to Epsilon; Part Number ENC-15M-26F. I do not know any other details about this product so please make sure it is the right thing for your application. I do not have the original box for this item, but it is new.
This auction is for an Emerson/Control Techniques Cable, Part Number LCF-010. This cable is used with Emerson's MX Series drives. It is a Resolver cable used for Emerson BLM-8xxx motors.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
