+ Post new Ad
Servo Type 140 Y Axis Power Feed for Bridgeport Style Milling Machine, US $7460 – Picture 0
Servo Type 140 Y Axis Power Feed for Bridgeport Style Milling Machine, US $7460 – Picture 0

Servo Type 140 Y Axis Power Feed For Bridgeport Style Milling Machine

US $7460

  • Shelton, Connecticut, United States
  • Jun 5th
Open on mobile:
QR code
Servo Type 140 Y-Axis Power Feed This Power Feed is used, in working condition. It came off a Bridgeport Mill and can fit on any similar styled milling machine. It comes without mounting brackets and does not have stops or a stop rod. The following are the specifications as listed on Servo's website: Semi-automated machining on Class 1 mills to 3 hp. Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque Intermittent Torque: 105 in.- lb. / 11.9 NM Continuous Torque: 90 in.- lb. / 10.2 NM Variable Feed Rate:  .75-25 IPM / 19-635 mm/min (table & cross)  .5-12 IPM / 13-305 mm/min (knee) Rapid Traverse:  35 IPM / 889 mm/min (table & cross) 12 IPM / 305 mm/min (knee) Gear Reduction Ratio (motor to screw shaft): 72:1. Helical gearing and torque limiting friction safety clutch with new and improved gear. Electrical: 110V, 50/60 Hz, 2.5A. Approx. weight: 15 lb. / 6.8 kg. The serial number is: 140-468638

Directions

Similar products from Tools for Milling Machines

SycoTec Type 4041 ESD Router Spindle Head Max RPM 50,000, 500 Watt

SycoTec Type 4041 ESD Router Spindle Head Max RPM 50,000, 500 Watt

  • Etobicoke, ON, Canada
  • Jun 6th
Morse Taper #4 Center with Drive Arm

Morse Taper #4 Center with Drive Arm

  • Sherrill, New York, United States
  • Jun 5th
HEULE DEBURRING TOOL COFA8-465 STK5474

HEULE DEBURRING TOOL COFA8-465 STK5474

  • Wadley, Alabama, United States
  • Jun 5th
Kondia 9"x42" Knee Bridgeport Type Milling Machine R-8 Variable Speed Clausing

Kondia 9"x42" Knee Bridgeport Type Milling Machine R-8 Variable Speed Clausing

  • Millstadt, Illinois, United States
  • Jun 5th
R390 11 T3 04M-PM 1025 SANDVIK Insert

R390 11 T3 04M-PM 1025 SANDVIK Insert

  • Windsor, Connecticut, United States
  • Jun 5th
SWIVEL BASE FOR 6" MILLING MACHINE VISE STK 8274

SWIVEL BASE FOR 6" MILLING MACHINE VISE STK 8274

  • Wadley, Alabama, United States
  • Jun 5th
Bridgeport Right Angle Attachment Fits Knee Milling Machine R-8 Yuasa 1" Arbor

Bridgeport Right Angle Attachment Fits Knee Milling Machine R-8 Yuasa 1" Arbor

  • Millstadt, Illinois, United States
  • Jun 5th
ISCAR 1.50" DIA INSERT MILL T490 FLN D1.50-4-.75R-13 With COOLANT Ports

ISCAR 1.50" DIA INSERT MILL T490 FLN D1.50-4-.75R-13 With COOLANT Ports

  • Buffalo, Minnesota, United States
  • Jun 5th
ERICKSON NMTB 30 DA180 COLLET CHUCK STK 7229

ERICKSON NMTB 30 DA180 COLLET CHUCK STK 7229

  • Wadley, Alabama, United States
  • Jun 5th
Servo Type 90 Z-Axis Power Feed for Bridgeport style Milling Machine

Servo Type 90 Z-Axis Power Feed for Bridgeport style Milling Machine

  • Shelton, Connecticut, United States
  • Jun 5th
ERICKSON NMTB 30 DA180 COLLET CHUCK STK 7226

ERICKSON NMTB 30 DA180 COLLET CHUCK STK 7226

  • Wadley, Alabama, United States
  • Jun 5th
ERICKSON NMTB 30 TG75 COLLET CHUCK STK 7237

ERICKSON NMTB 30 TG75 COLLET CHUCK STK 7237

  • Wadley, Alabama, United States
  • Jun 5th
Tri-Tech Fadal M 5412 5 Axis Spindle Head Milling CNC Cutting Head Rotary Tilt

Tri-Tech Fadal M 5412 5 Axis Spindle Head Milling CNC Cutting Head Rotary Tilt

  • Lompoc, California, United States
  • Jun 5th
ERICKSON NMTB 30 TG75 COLLET CHUCK STK 7239

ERICKSON NMTB 30 TG75 COLLET CHUCK STK 7239

  • Wadley, Alabama, United States
  • Jun 5th
Ghost Gunner 2 CNC, Brand new, never used

Ghost Gunner 2 CNC, Brand new, never used

  • Annandale, Virginia, United States
  • Jun 5th
ERICKSON NMTB 30 DA300 COLLET CHUCK STK 7253

ERICKSON NMTB 30 DA300 COLLET CHUCK STK 7253

  • Wadley, Alabama, United States
  • Jun 5th
Bridgeport Milling Machine with DRO, Chuck, and Vice

Bridgeport Milling Machine with DRO, Chuck, and Vice

  • Shelton, Connecticut, United States
  • Jun 5th
MILLING CUTTER TBN1254-U

MILLING CUTTER TBN1254-U

  • Plainville, Connecticut, United States
  • Jun 5th
Bridgeport Adjustable Boring Head No. 1 Shank metal box and accessories

Bridgeport Adjustable Boring Head No. 1 Shank metal box and accessories

  • Trumbull, Connecticut, United States
  • Jun 5th
ERICKSON NMTB 30 DA300 COLLET CHUCK STK 7254

ERICKSON NMTB 30 DA300 COLLET CHUCK STK 7254

  • Wadley, Alabama, United States
  • Jun 5th

People who viewed this item also vieved

Interwired SVOHF, SV-OHF, OTS-8902, ShipSameDay With 2-3 Days Shipping #1603A11

Interwired SVOHF, SV-OHF, OTS-8902, ShipSameDay With 2-3 Days Shipping #1603A11

  • Los Gatos, California, United States
  • Jan 30th
Mallory Eccol 325P755H37A23N4X, C32FD37075, Lot Of 2, ShipSameDay#1603A9

Mallory Eccol 325P755H37A23N4X, C32FD37075, Lot Of 2, ShipSameDay#1603A9

  • Los Gatos, California, United States
  • Jan 30th
Linear System SWF-6GWVV, SWF6GWVV, ShipSameDay W/2-3days #1603A8

Linear System SWF-6GWVV, SWF6GWVV, ShipSameDay W/2-3days #1603A8

  • Los Gatos, California, United States
  • Jan 30th
2HP Spdl Clausing BF35 DRILL PRESS

2HP Spdl Clausing BF35 DRILL PRESS

  • Harrison, New Jersey, United States
  • Jan 30th
150TN TONS Pressmaster FTP-150 TIRE PRESS, Power Elevation of Tbl

150TN TONS Pressmaster FTP-150 TIRE PRESS, Power Elevation of Tbl

  • Harrison, New Jersey, United States
  • Jan 30th
30" Arm 8.28" Column Clausing CL720A RADIAL DRILL

30" Arm 8.28" Column Clausing CL720A RADIAL DRILL

  • Harrison, New Jersey, United States
  • Jan 30th
Wire EDM Clamp set

Wire EDM Clamp set

  • Rochester, New York, United States
  • Jan 30th
AGIE MODEL AC CLASSIC 2, NEW IN 2001

AGIE MODEL AC CLASSIC 2, NEW IN 2001

  • Ames, Iowa, United States
  • Jan 30th
YALE 1 TON ELECTRIC CHAIN HOIST

YALE 1 TON ELECTRIC CHAIN HOIST

  • Ames, Iowa, United States
  • Jan 30th
heim press brake 70-12MA in good working condtion

heim press brake 70-12MA in good working condtion

  • Fletcher, Ohio, United States
  • Jan 30th
heim press brake 45-12ma (missing back gauge motor) rebuilt clutch

heim press brake 45-12ma (missing back gauge motor) rebuilt clutch

  • Fletcher, Ohio, United States
  • Jan 30th
AUTOMATIC SHEAR - 24" x 16 Gauge

AUTOMATIC SHEAR - 24" x 16 Gauge

  • Joplin, Missouri, United States
  • Jan 30th
SUNNEN HONE 2G-P28-1125VB MANDREL STK 1449

SUNNEN HONE 2G-P28-1125VB MANDREL STK 1449

  • Wadley, Alabama, United States
  • Jan 30th
SUNNEN HONE 2G-P28-1500WD MANDREL STK 1448

SUNNEN HONE 2G-P28-1500WD MANDREL STK 1448

  • Wadley, Alabama, United States
  • Jan 30th
SUNNEN HONE 2G-P28-1187VB MANDREL STK 1447

SUNNEN HONE 2G-P28-1187VB MANDREL STK 1447

  • Wadley, Alabama, United States
  • Jan 30th
CHEVALIER SURFACE GRINDER 6"x18" FSG-618M (28726)

CHEVALIER SURFACE GRINDER 6"x18" FSG-618M (28726)

  • Cincinnati, Ohio, United States
  • Jan 30th
Moore Jig Grinder

Moore Jig Grinder

  • West Palm Beach, Florida, United States
  • Jan 30th
Browne & Sharpe Surface Grinder

Browne & Sharpe Surface Grinder

  • West Palm Beach, Florida, United States
  • Jan 30th
NICE 10" X 24" SOUTH BEND "HEAVY 10" TOOLROOM LATHE 5-C CAMLOCK SPINDLE VIDEO

NICE 10" X 24" SOUTH BEND "HEAVY 10" TOOLROOM LATHE 5-C CAMLOCK SPINDLE VIDEO

  • Seekonk, Massachusetts, United States
  • Jan 30th
Hardinge Lathe Coolant Line and Valve

Hardinge Lathe Coolant Line and Valve

  • Valley View, Pennsylvania, United States
  • Jan 30th
J H Williams Metal Tool Holder

J H Williams Metal Tool Holder

  • Williamston, South Carolina, United States
  • Jan 30th
Sunnen Horizontal Hone

Sunnen Horizontal Hone

  • Watertown, Connecticut, United States
  • Jan 30th
GLEASON INDEX PLATE & CAM FOR A 608 OR 609 ROUGHER OR FINISHER (63 Tooth) #27345

GLEASON INDEX PLATE & CAM FOR A 608 OR 609 ROUGHER OR FINISHER (63 Tooth) #27345

  • Cincinnati, Ohio, United States
  • Jan 30th
GLEASON INDEX PLATE & CAM FOR A 608 OR 609 ROUGHER OR FINISHER (61 Tooth) #27343

GLEASON INDEX PLATE & CAM FOR A 608 OR 609 ROUGHER OR FINISHER (61 Tooth) #27343

  • Cincinnati, Ohio, United States
  • Jan 30th
POWERMATIC SAFETY-FLEX OVER ARM SAW BLADE GUARD - NEW SAFETY GUARD

POWERMATIC SAFETY-FLEX OVER ARM SAW BLADE GUARD - NEW SAFETY GUARD

  • Baltimore, MD, United States
  • Jan 30th
OTT + Heugel HSS-E TiN Coat Saw 231mm x 2mm cut width x 74 Teeth

OTT + Heugel HSS-E TiN Coat Saw 231mm x 2mm cut width x 74 Teeth

  • Cleveland, Ohio, United States
  • Jan 30th
14" ABRASIVE METAL CUTTING WHEELS, 1/8" WIDE, 1" ARBOR

14" ABRASIVE METAL CUTTING WHEELS, 1/8" WIDE, 1" ARBOR

  • Pinellas Park, Florida, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies