+ Post new Ad
SET OF DA180 COLLET ;PARLEC, US $570 – Picture 0
SET OF DA180 COLLET ;PARLEC, US $570 – Picture 0

Set Of Da180 Collet ;parlec

US $570

  • Cudahy, Wisconsin, United States
  • Jun 4th
Open on mobile:
QR code
I am posting these as used because some of the collets have little rust from sitting in storage. they have never been used. this is sold as a set. there are 2 of each size listed below. sizes are as follows. :3/4", 5/8", 1/2", 3/8", 5/16", 1/4", 3/16" and 1/8".

Directions

Similar products from Fittings & Plates

CHALLENGE L-101 RIGHT ANGLE PLATE 6 x 8 x 6

CHALLENGE L-101 RIGHT ANGLE PLATE 6 x 8 x 6

  • Chatsworth, California, United States
  • Jun 5th
16" Dia. Lathe Face Plate L1 mount LeBlond Lodge & Shipley or ?

16" Dia. Lathe Face Plate L1 mount LeBlond Lodge & Shipley or ?

  • Long Beach, California, United States
  • Jun 5th
Lathe 14" Dia. Face Fixture Plate L00 Mount D5676

Lathe 14" Dia. Face Fixture Plate L00 Mount D5676

  • Long Beach, California, United States
  • Jun 5th
PF C5 SPINDEX INDEX FIXTURE O-201

PF C5 SPINDEX INDEX FIXTURE O-201

  • Mira Loma, California, United States
  • Jun 5th
Vintage Angle Plate / Tapped Holes 3 1/8"X 3 1/4"X 2 15/16" High.

Vintage Angle Plate / Tapped Holes 3 1/8"X 3 1/4"X 2 15/16" High.

  • Yorktown, Indiana, United States
  • Jun 5th
Vintage Sine Bar 5" Tool Maker Made Hardened Heavy Duty.

Vintage Sine Bar 5" Tool Maker Made Hardened Heavy Duty.

  • Yorktown, Indiana, United States
  • Jun 5th
45" x 26" x 3" Steel Weld T-Slotted Table Cast iron Layout Plate Jig Weld

45" x 26" x 3" Steel Weld T-Slotted Table Cast iron Layout Plate Jig Weld

  • Grand Rapids, Michigan, United States
  • Jun 4th
Weldon, Model 200 Air Bearing Fixture for tool Sharpening

Weldon, Model 200 Air Bearing Fixture for tool Sharpening

  • Raritan, New Jersey, United States
  • Jun 4th
HHIP 4 X 4 X 3 X 1-1/8 INCH STEEL RIGHT ANGLE PLATE WITH NO HOLES (3402-1443)

HHIP 4 X 4 X 3 X 1-1/8 INCH STEEL RIGHT ANGLE PLATE WITH NO HOLES (3402-1443)

  • USA, United States
  • Jun 4th
22" x 20" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld

22" x 20" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld

  • Grand Rapids, Michigan, United States
  • Jun 4th
HARDINGE 9" FACE PLATE MODEL C27-D

HARDINGE 9" FACE PLATE MODEL C27-D

  • Port Orange, Florida, United States
  • Jun 4th
61" x 94-1/2" x 1" Milled and/or Blanchard Ground Steel table

61" x 94-1/2" x 1" Milled and/or Blanchard Ground Steel table

  • Cedarburg, Wisconsin, United States
  • Jun 4th
Taft-peirce universal right angle iron 4"x 3-3/4" x 5" (Inv.35467)

Taft-peirce universal right angle iron 4"x 3-3/4" x 5" (Inv.35467)

  • Portland, Connecticut, United States
  • Jun 4th
5C COLLET HOLDING FIXTURE, HORIZONTAL OR VERTICAL, QUICK OPEN & CLOSING

5C COLLET HOLDING FIXTURE, HORIZONTAL OR VERTICAL, QUICK OPEN & CLOSING

  • Caledonia, Wisconsin, United States
  • Jun 4th
Engine Lathe Tool Adapter D1-8 Camlock Spindle Type 9” Diameter x 5.25” Bore

Engine Lathe Tool Adapter D1-8 Camlock Spindle Type 9” Diameter x 5.25” Bore

  • San Bernardino, California, United States
  • Jun 4th
MAGNETIC TRANSFER V-BLOCK ,ALUMINUM AND STEEL , MACHINIST MADE

MAGNETIC TRANSFER V-BLOCK ,ALUMINUM AND STEEL , MACHINIST MADE

  • Berlin, Connecticut, United States
  • Jun 4th
Cast Iron 45's

Cast Iron 45's

  • Houston, Texas, United States
  • Jun 4th
HEINRICH TOOLS CO. FOOT AIR CONTROL PEDAL AIR CONTROLLER PEDAL PNEUMATIC FIXTURE

HEINRICH TOOLS CO. FOOT AIR CONTROL PEDAL AIR CONTROLLER PEDAL PNEUMATIC FIXTURE

  • Louisville, Kentucky, United States
  • Jun 4th
53" x 32-1/4" x 7" Steel Welding 5 T-Slotted Table Cast iron Layout Plate _JIG

53" x 32-1/4" x 7" Steel Welding 5 T-Slotted Table Cast iron Layout Plate _JIG

  • Grand Rapids, Michigan, United States
  • Jun 4th
35.375" x 16.125" x 3.5 Steel Weld T-Slotted Table Cast iron Layout Plate Weld

35.375" x 16.125" x 3.5 Steel Weld T-Slotted Table Cast iron Layout Plate Weld

  • Grand Rapids, Michigan, United States
  • Jun 4th

People who viewed this item also vieved

USED CARBIDE TIPPED #4MT LATHE DEAD CENTER with 1.244" POINT DIAMETER

USED CARBIDE TIPPED #4MT LATHE DEAD CENTER with 1.244" POINT DIAMETER

  • Fairfield, Iowa, United States
  • Jan 30th
CNC 3MT .000197" Morse Taper 3 HEAVY DUTY 1430LB MT3 LIVE CENTER WATERPROOF

CNC 3MT .000197" Morse Taper 3 HEAVY DUTY 1430LB MT3 LIVE CENTER WATERPROOF

  • Saint Charles, Illinois, United States
  • Jan 30th
Empty Box For 81PCS Gage Block NEW

Empty Box For 81PCS Gage Block NEW

  • Saint Charles, Illinois, United States
  • Jan 30th
SOFT Steel JAWS 15"3pc-1.5 mm x 60 Degree Serrations

SOFT Steel JAWS 15"3pc-1.5 mm x 60 Degree Serrations

  • Chino, California, United States
  • Jan 30th
12" SMW KNC S315 Hydraulic Chuck

12" SMW KNC S315 Hydraulic Chuck

  • Elk River, Minnesota, United States
  • Jan 30th
H&R, 82-3.5-P, 3pc Soft Lathe Chuck Jaws, 1.5mm x 60 Serrated, Pointed, /KJ2/

H&R, 82-3.5-P, 3pc Soft Lathe Chuck Jaws, 1.5mm x 60 Serrated, Pointed, /KJ2/

  • Saint Louis, Missouri, United States
  • Jan 30th
HUB Clamp 11B-5080-X 111B5080X

HUB Clamp 11B-5080-X 111B5080X

  • Manila, Philippines
  • Jan 30th
ECLIPSE MAGNETICS LTD. WELDTOOL VARIABLE CLAMP E952 NO RESERVE

ECLIPSE MAGNETICS LTD. WELDTOOL VARIABLE CLAMP E952 NO RESERVE

  • Winston-Salem, North Carolina, United States
  • Jan 30th
Pipe Lifting Scissor Clamp 350 Pound Capacity

Pipe Lifting Scissor Clamp 350 Pound Capacity

  • Vineland, New Jersey, United States
  • Jan 30th
2 KENNAMETAL KV4540-TG100825F COLLET CHUCKS, USES TG100 COLLET

2 KENNAMETAL KV4540-TG100825F COLLET CHUCKS, USES TG100 COLLET

  • Euclid, Ohio, United States
  • Jan 30th
2 KENNAMETAL KV540-MER32-090RF COLLET CHUCKS FOR ER32 COLLET

2 KENNAMETAL KV540-MER32-090RF COLLET CHUCKS FOR ER32 COLLET

  • Euclid, Ohio, United States
  • Jan 30th
2 KENNAMETAL KV4540-TG100825F COLLET CHUCKS FOR TG100 COLLET

2 KENNAMETAL KV4540-TG100825F COLLET CHUCKS FOR TG100 COLLET

  • Euclid, Ohio, United States
  • Jan 30th
Quick Change Tap Collet similar to valenite TAP 32 --9/16"

Quick Change Tap Collet similar to valenite TAP 32 --9/16"

  • Coventry, Rhode Island, United States
  • Jan 30th
Lot of 7 Pcs 5C Collets 7/16", 17/32", 1/8", 21/32", 33/64", 5/16", 11/64".

Lot of 7 Pcs 5C Collets 7/16", 17/32", 1/8", 21/32", 33/64", 5/16", 11/64".

  • Coventry, Rhode Island, United States
  • Jan 30th
Lot of 5 Pcs # 5c Collets, 7/8", 5/16", 13/64", 37/64", 19/32,

Lot of 5 Pcs # 5c Collets, 7/8", 5/16", 13/64", 37/64", 19/32,

  • Coventry, Rhode Island, United States
  • Jan 30th
Unknown 4036SS X 1 Stainless Steel Sprocket, 1" Bore with 1/4" keyway - NEW

Unknown 4036SS X 1 Stainless Steel Sprocket, 1" Bore with 1/4" keyway - NEW

  • Bay City, Michigan, United States
  • Jan 30th
Martin 40BS34 X 1 Sprocket 1" Bore with 1/4" keyway - NEW

Martin 40BS34 X 1 Sprocket 1" Bore with 1/4" keyway - NEW

  • Bay City, Michigan, United States
  • Jan 30th
Martin 40B32 X 7/8 Sprocket 7/8" Bore with 3/16" keyway - NEW

Martin 40B32 X 7/8 Sprocket 7/8" Bore with 3/16" keyway - NEW

  • Bay City, Michigan, United States
  • Jan 30th
YUASA ROTARY TABLE FOR MILL MILLING MACHINIST NO RESERVE

YUASA ROTARY TABLE FOR MILL MILLING MACHINIST NO RESERVE

  • Lake Orion, Michigan, United States
  • Jan 30th
GREAT!! TROYKE 18" PRECISION ROTARY TABLE # BL-18

GREAT!! TROYKE 18" PRECISION ROTARY TABLE # BL-18

  • Chino, California, United States
  • Jan 30th
Koma Precision (Tsudakoma) Model RT147 Multi Face, Multi Spindle CNC Indexer

Koma Precision (Tsudakoma) Model RT147 Multi Face, Multi Spindle CNC Indexer

  • Lincolnwood, Illinois, United States
  • Jan 30th
Angle Vise 3 Inch

Angle Vise 3 Inch

  • Cookeville, Tennessee, United States
  • Jan 30th
Irwin 4 1/2 inch Blue Vice

Irwin 4 1/2 inch Blue Vice

  • Roswell, Georgia, United States
  • Jan 30th
QUICK RELEASE DRILL PRESS VISE Mill Vise Used USA

QUICK RELEASE DRILL PRESS VISE Mill Vise Used USA

  • Palatine, Illinois, United States
  • Jan 30th
Machinists 2/11 Machinists XL Brass Magnetic Trabnsfer Block

Machinists 2/11 Machinists XL Brass Magnetic Trabnsfer Block

  • Lutz, Florida, United States
  • Feb 13th
Machinists 2/11 Heirloom Quality Multi Tapped angle Plate USA USA USA

Machinists 2/11 Heirloom Quality Multi Tapped angle Plate USA USA USA

  • Lutz, Florida, United States
  • Feb 13th
Machinists 2/11 Iconic Starrett 567 Complex Multi V Block in great shape

Machinists 2/11 Iconic Starrett 567 Complex Multi V Block in great shape

  • Lutz, Florida, United States
  • Feb 13th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies