+ Post new Ad
SGS - 1/4 Inch Diameter, 3/4 Inch Length of Cut, 4 Flutes, Solid Carbide Single, US $45 – Picture 0
SGS - 1/4 Inch Diameter, 3/4 Inch Length of Cut, 4 Flutes, Solid Carbide Single, US $45 – Picture 0

Sgs - 1/4 Inch Diameter, 3/4 Inch Length Of Cut, 4 Flutes, Solid Carbide Single

US $45

  • Nogales, Arizona, United States
  • Jun 21st
Open on mobile:
QR code
SGS - 1/4 Inch Diameter, 3/4 Inch Length of Cut, 4 Flutes, Solid Carbide Single End Square End Mill AlTiN Coated, 2-1/2 Inch Overall Length, 1/4 Shank Inch Diameter, Spiral Flute, 30 Helix Angle, Centercutting, Regular Length Type Features and Benefits Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials. Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest coatings. It is commonly used for machining aircraft and aerospace material, nickel alloys, stainless steel, titanium, cast iron and carbon steel. Specs Mill Diameter (Inch) 1/4 Mill Diameter (Decimal Inch) 0.2500 Number of Flutes 4 Length of Cut (Inch) 3/4 Length of Cut (Decimal Inch) 0.7500 Shank Diameter (Inch) 1/4 Shank Diameter (Decimal Inch) 0.2500 Overall Length (Inch) 2-1/2 Overall Length (Decimal Inch) 2.5000 Material Solid Carbide Finish/Coating AlTiN Single or Double End Single Cutting Direction Right Hand Flute Direction Right Hand Center Cutting Center Cutting Flute Type Spiral Length Type Regular Helix Angle ( ) 30.00 Mill Diameter Tolerance (Decimal Inch) +0.000/-0.002 Material Grade Micrograin Chipbreaker (Yes/No) No Extended Reach (Yes/No) No Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004 Series/List 1

Directions

Similar products from Solid Carbide Drill Bits

Walter-Titex 7/16",140 Degree Drill Point Angle,Spiral Flute Mfr Part #:5537219

Walter-Titex 7/16",140 Degree Drill Point Angle,Spiral Flute Mfr Part #:5537219

  • Nelsonville, Ohio, United States
  • Jun 21st
SOLID CARBIDE DRILL 19/64" DIAM(.2969")x2-5/16" FL LGTH 5-7/16"OAL NEW USA$15.00

SOLID CARBIDE DRILL 19/64" DIAM(.2969")x2-5/16" FL LGTH 5-7/16"OAL NEW USA$15.00

  • North Tonawanda, New York, United States
  • Jun 21st
Walter-Titex - 1/2", 140 Degree Drill Point Angle, Spiral Flute, P/N# 5537234

Walter-Titex - 1/2", 140 Degree Drill Point Angle, Spiral Flute, P/N# 5537234

  • Nelsonville, Ohio, United States
  • Jun 21st
scrap carbide inserts 7.5 Lbs

scrap carbide inserts 7.5 Lbs

  • Lakeside, California, United States
  • Jun 21st
NEW SECO DRILL CROWN SD100-18.65-P

NEW SECO DRILL CROWN SD100-18.65-P

  • Hesperia, California, United States
  • Jun 21st
SOLID CARBIDE DRILL LETTER "N"(.302")DIA / 1/4"3 FLATTED SHANK TSC USA NEW$14.00

SOLID CARBIDE DRILL LETTER "N"(.302")DIA / 1/4"3 FLATTED SHANK TSC USA NEW$14.00

  • North Tonawanda, New York, United States
  • Jun 21st
SOLID CARBIDE DRILL LETTER "N"(.302)DIAM 3 FLATS ON SHANK TSC USA NEW $16.00

SOLID CARBIDE DRILL LETTER "N"(.302)DIAM 3 FLATS ON SHANK TSC USA NEW $16.00

  • North Tonawanda, New York, United States
  • Jun 21st
NEW MORSE CUTTING TOOLS CORE DRILL 7/8 #3 EDP 16088 TAPER SHANK BLACK OXIDE

NEW MORSE CUTTING TOOLS CORE DRILL 7/8 #3 EDP 16088 TAPER SHANK BLACK OXIDE

  • Hesperia, California, United States
  • Jun 21st
SGS - 1/8 Inch Diameter, 1/2 Inch Length of Cut, 4 Flutes, Solid Carbide

SGS - 1/8 Inch Diameter, 1/2 Inch Length of Cut, 4 Flutes, Solid Carbide

  • Nogales, Arizona, United States
  • Jun 21st
SGS - 3/16 Inch Diameter, 9/16 Inch Length of Cut, 2 Flutes, Solid Carbide Singl

SGS - 3/16 Inch Diameter, 9/16 Inch Length of Cut, 2 Flutes, Solid Carbide Singl

  • Nogales, Arizona, United States
  • Jun 21st
SGS - 5/16 Inch Diameter, 13/16 Inch Length of Cut, 4 Flutes, Solid Carbide

SGS - 5/16 Inch Diameter, 13/16 Inch Length of Cut, 4 Flutes, Solid Carbide

  • Nogales, Arizona, United States
  • Jun 21st
SGS - 1/2 Inch Diameter, 1-1/4 Inch Length of Cut, 2 Flutes, Solid Carbide Singl

SGS - 1/2 Inch Diameter, 1-1/4 Inch Length of Cut, 2 Flutes, Solid Carbide Singl

  • Nogales, Arizona, United States
  • Jun 21st
SGS - 1/2 Inch Diameter, 1 Inch Length of Cut, 4 Flutes, Solid Carbide Single

SGS - 1/2 Inch Diameter, 1 Inch Length of Cut, 4 Flutes, Solid Carbide Single

  • Nogales, Arizona, United States
  • Jun 21st
SGS - 3/8 Inch Diameter, 1 Inch Length of Cut, 2 Flutes, Solid Carbide Single En

SGS - 3/8 Inch Diameter, 1 Inch Length of Cut, 2 Flutes, Solid Carbide Single En

  • Nogales, Arizona, United States
  • Jun 21st
3-PCS-PAHL TOOLS- SOLID -CARBIDE MACH REAMERS -6 MM - 4 FLUTE. 3""oal

3-PCS-PAHL TOOLS- SOLID -CARBIDE MACH REAMERS -6 MM - 4 FLUTE. 3""oal

  • McKee, Kentucky, United States
  • Jun 21st
KENNAMETAL BRAZED CARBIDE END MILL DWG 1850611 32 MM 2 FLUTE

KENNAMETAL BRAZED CARBIDE END MILL DWG 1850611 32 MM 2 FLUTE

  • New Oxford, Pennsylvania, United States
  • Jun 21st
(3) Widia Metal Removal 9/32" Solid Carbide Drill - 240 DR4S 9/32 DRL

(3) Widia Metal Removal 9/32" Solid Carbide Drill - 240 DR4S 9/32 DRL

  • Fort Thomas, Kentucky, United States
  • Jun 21st
3 NEW GOOD QUALITY 7/16" (.4375) REAMERS WITH GROUND SHANK & .420 PILOT DIAMETER

3 NEW GOOD QUALITY 7/16" (.4375) REAMERS WITH GROUND SHANK & .420 PILOT DIAMETER

  • Toms River, New Jersey, United States
  • Jun 21st
NEW PRECORP SOLID CARBIDE DRILL BIT .2515 FLAT SHANK

NEW PRECORP SOLID CARBIDE DRILL BIT .2515 FLAT SHANK

  • Toms River, New Jersey, United States
  • Jun 21st
40 PROFESSIONALLY RESHARPENE CARBIDE DRILL BITS CARBRO GUHRING SIZE .4221 27/64"

40 PROFESSIONALLY RESHARPENE CARBIDE DRILL BITS CARBRO GUHRING SIZE .4221 27/64"

  • Toms River, New Jersey, United States
  • Jun 21st

People who viewed this item also vieved

MZS05000MB VP15TF MITSUBISHI *** COOLANT DRILL SIZE 0.5000 - 1/2 ***

MZS05000MB VP15TF MITSUBISHI *** COOLANT DRILL SIZE 0.5000 - 1/2 ***

  • Minneapolis, Minnesota, United States
  • Jan 30th
MZS04375MB VP15TF MITSUBISHI *** COOLANT DRILL SIZE 0.4375 - 7/16 ***

MZS04375MB VP15TF MITSUBISHI *** COOLANT DRILL SIZE 0.4375 - 7/16 ***

  • Minneapolis, Minnesota, United States
  • Jan 30th
MZS03438MB VP15TF MITSUBISHI *** COOLANT DRILL SIZE 0.3437 - 11/32 ***

MZS03438MB VP15TF MITSUBISHI *** COOLANT DRILL SIZE 0.3437 - 11/32 ***

  • Minneapolis, Minnesota, United States
  • Jan 30th
CHICAGO LATROBE JL DRILLS 6.0 MM HSS ( 0.2362" ) P/N 47295 *** 12 PCS ***

CHICAGO LATROBE JL DRILLS 6.0 MM HSS ( 0.2362" ) P/N 47295 *** 12 PCS ***

  • Blythewood, South Carolina, United States
  • Jan 30th
CHICAGO LATROBE SM DRILLS TIN 19/64" HSS ( 0.3594" ) P/N 48519 *** 11 PCS ***

CHICAGO LATROBE SM DRILLS TIN 19/64" HSS ( 0.3594" ) P/N 48519 *** 11 PCS ***

  • Blythewood, South Carolina, United States
  • Jan 30th
Greenlee D'VERSIBIT 54-Inch Drill Bit Extension x 3/16" 3XT-54 *Made in the USA"

Greenlee D'VERSIBIT 54-Inch Drill Bit Extension x 3/16" 3XT-54 *Made in the USA"

  • South Pasadena, California, United States
  • Jan 30th
CLE-FORGE Jobber Drill Set, Black Oxide HSS, A To Z, 25 pc/MISSING LETTER R

CLE-FORGE Jobber Drill Set, Black Oxide HSS, A To Z, 25 pc/MISSING LETTER R

  • Rochester, New Hampshire, United States
  • Jan 30th
# 1 Drill bit bright finish Jobbers length 12pc NEW

# 1 Drill bit bright finish Jobbers length 12pc NEW

  • Amherst, Ohio, United States
  • Jan 30th
Kennametal Jobber Drill K105A04531 - 3 Fl, .450" Dia, 4-1/2" OAL, Reconditioned

Kennametal Jobber Drill K105A04531 - 3 Fl, .450" Dia, 4-1/2" OAL, Reconditioned

  • Valencia, California, United States
  • Jan 30th
Slugger Cutter, 7/8" dia, Annual cutter, 1" depth of cut, drill bit, sharp

Slugger Cutter, 7/8" dia, Annual cutter, 1" depth of cut, drill bit, sharp

  • Maryland Heights, Missouri, United States
  • Jan 30th
Slugger Cutter, 1-5/16" dia, drill bit, Annual cutter, 2" depth of cut

Slugger Cutter, 1-5/16" dia, drill bit, Annual cutter, 2" depth of cut

  • Maryland Heights, Missouri, United States
  • Jan 30th
Showa MT4 Super Drills A1 50-55 HD-A15-55

Showa MT4 Super Drills A1 50-55 HD-A15-55

  • Millstone Township, New Jersey, United States
  • Jan 30th
Greenfield Industries 1/8" Cobalt Drill Bits Screw Machine Length 10 Ea.

Greenfield Industries 1/8" Cobalt Drill Bits Screw Machine Length 10 Ea.

  • Carlsbad, California, United States
  • Jan 30th
NEW 12PC LOT #5 .2055 COBALT SCREW MACHINE LENGTH DRILL BIT No5

NEW 12PC LOT #5 .2055 COBALT SCREW MACHINE LENGTH DRILL BIT No5

  • Tujunga, California, United States
  • Jan 30th
Precision Twist Drill, R18B, 018230, #30, HSS Jobber Length Drill Bits - 12 each

Precision Twist Drill, R18B, 018230, #30, HSS Jobber Length Drill Bits - 12 each

  • Chillicothe, Missouri, United States
  • Jan 30th
Lot Of 4 CLE-FORGE Cleveland 7/32 102 Drill Bits

Lot Of 4 CLE-FORGE Cleveland 7/32 102 Drill Bits

  • Abbeville, South Carolina, United States
  • Jan 30th
Whitman & Barnes Tri Duty 5/8" 2MT x 8-7/8"OAL DRILL BIT Hercules MPN 575

Whitman & Barnes Tri Duty 5/8" 2MT x 8-7/8"OAL DRILL BIT Hercules MPN 575

  • Elizabethtown, Pennsylvania, United States
  • Jan 30th
5/16 TWIST DRILL TAPER SHANK DRILL BIT, High Speed Steel

5/16 TWIST DRILL TAPER SHANK DRILL BIT, High Speed Steel

  • Morenci, Michigan, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies