shaft bushing for sale, brand-new and used.

RK09 Series Japan 6pc. Lot of High Quality, Low Cost Dual Element Horizontal PCB Mount Potentiometers Audio Taper, Dual Unit/Single Plast

Clarostat 5K OHM Pot Audio Taper Potentiometer with an ALTERNATING Momentary DPST Switch (2 Pole, 1 Throw) 1 "Buy it Now" is for 1 Pot When the button is pressed, one pole is closed, when released, the other pole closes. Can be wired like a SPST with either NC or NO contacts, or you can wire both poles at the same time (One is open while the other is closed) Specifications: Brand: Clarostat Part: 1320-3027-7 Resistance: 5K OHM Resistance Type: Audio Taper Tolerance: 5

Item Number:

This is a very potent little motor. CW rotation only. Running no load, at max voltage, this thing spins well over 10,000 RPM - (probably over 20K).

Belt Drive Motor, Split-Phase, 1/3, 1/11 HP, Nameplate RPM 1725/1140, Voltage 115, 1 Phase, Frame 48, Open Dripproof, Full Load Amps 6.6/2.4, 60 Hz, Cradle Mounting, Thermal Protection Auto, Insulation Class B, Service Factor 1.0, Ball Bearings, Max. Ambient Temp. 40 Degrees C, Rotation CW/CCW, Overall Length 10-1/4 In., Shaft Dia.

NEW 3" I.D. Linear Bushing Bearing Rexroth R0750 248 15 Star Barden

A.O. SMITH Draft Inducer Motor with Switch # 571 Draft Inducer Motor Fan & Blower Duty Shaded Pole 1/20 HP 3000 RPM 1 SPEED 115/230 VOLTS 1.8/.92 AMPS 1/4" X 2 1/2" Shaft Diameter and Length 3 3/8 Motor Diameter CWSE/CWLE Rotation 6 "A" diameter

#header, #subheader, #leftpane, #rightpane, #showcase ul, #seo, ul.tablinks, #largeimage, #design, #customhtml, #descriptiontitle, #ImageID { display: none; } #showcase a { visibility: hidden; } #background { text-align: center; } #container { border: 1px solid #999; text-align: center; width: 770px; margin: 0px auto; } * html #container { width: 772

used 1P3T Rotary Switch, 3 position, 1/4 inch shaft, 3/8" mount bushing Solder terminals. Wafer material: ceramic. As presently configured, the outer wafer serves only as a terminal block for two 20K 2 watt resistors and one 610 ohm 1/2 watt resistor.

used 3P3T Rotary Switch, 3 position, 1/4 inch shaft, 3/8" mount bushing Solder terminals. Manufacturer unknown. Mounting hole: 3/8 inch diameter.

111SD, used 4P3T (or 4P5T) Rotary Switch, 3 or 5 position, 1/8" shaft, 1/4" mount bushing There are two rotation stop tabs. As presently configured, the 3 position stop tab is in place (and the 5 position stop tab is bent out of the way). To reconfigure for 5 positions: bend the 3 position tab out of the way, and bend the 5 position tab down (toward the wafters).

PA300, used 5P3T Rotary Switch, 3 position, 1/4 inch shaft, 3/8" mount bushing Solder terminals. Wafer material: ceramic. Manufacturer unknown.

PA1007, used 3P3T Rotary Switch, 3 position, 1/4 inch shaft, 3/8" mount bushing Solder terminals Manufacturer unknown. Mounting hole: 3/8 inch diameter. Threaded bushing is 3/8 inch long.

Pulley / Sheave Reducer Sleeve to reduce a 5/8" Bore Pulley sprocket wheel to fit a Motor with a 9/16" Shaft with a 3/16"

ELECTROSWITCH CORPORATION ROTARY 3 DECK SWITCH &n

If your pads are loose and ready to fall on the next job, replacing is cheep and easy. Start with WD40 from the auto parts store. Let it soak for an hour and wa-la it will come off.